Plastic Testing Equipment Dealers in Dlf Industrial Area, Faridabad

Presto’s Co-efficient of friction tester is mostly used to evaluate the coefficient of starting and sliding friction of plastic sheets, papers, films, and pipes. It measures the kinetic and static friction of the test specimen when it slides over substance in a specified test situation.  The test is done to evaluate the stackability of plastic sheets and films. These test procedures help plastic manufacturers to avoid accidents due to resistance in loading, packaging, and transporting materials. The uneven sheet thickness could result in enhanced friction, which leads to uneven strength. Co-efficient of friction methodology replicates the degree of mistreatment a plastic film can successfully endure without affecting the contents. It is a very simple and easy to use instrument designed specially to authenticate the friction that subsists between two surfaces duly covered by the plastic material. In many types of plastic films, slip properties are generated by default due to additives. Co-efficient of friction reveals the degree of transgression a sheet will successfully suffer, without affecting the labels and prints           Microprocessor based display for accurate test results Display for Dynamic and Kinetic Friction Memory to hold up to 9 test reading Highly accurate test results under sliding friction. Steel with Glass Mounting as Sample Mounting Surface Slider Block for performing tests – Sample to Sample, glass or metal No slippage in case specimen is tightened uniformly using fly screws without any loops. Bright LED display Feather touch controls   Maximum Capacity of Load Cell: 3 Kgf Display: Digital LED Display Device Accuracy: ± 1% within entire range Resolution /Least Count: 0.1 gm Power: 220V, Single phase, 50 Hz Speed: 150 ± 30 mm/min Motor: 1/4 HP Single Phase , 1440 rpm

The melt flow index tester (Deluxe Model) is a significant attribute of any plastic material that can help in determining various chemical and physical properties of the materials. The melt flow index tester is a highly precise and accurate instrument that offers exact and accurate determination of melt flow index of a plastic resin. The melt flow index of a plastic resin is termed as the weight of the resin flowing through a capillary tube every ten minutes under an unambiguous load or shear stress. The test procedure includes passing the molten plastic granules from a capillary tube of specific dimensions. A specified load is applied to the test sample with the help of a piston. Apart from that the following are also available for the customers - Melt Flow Index NXG Model.   The melt flow index tester is used for determination of the melt flow rate of various materials such as plastic granules. It is a widely used product in plastics and polymer industry. The instrument is designed and manufactured as per standards set by ISO and ASTM and is mainly focused on meeting the principal conditions necessary for the test procedure. The instrument has a PID temperature controller, and its working is based on a microprocessor. The temperature can vary from ambient to 4000C. The resolution of the instrument is also 0.10C and has an accuracy of ±0.10C. The apparatus comes with a digital timer that is pre-settable and can be extended to 59 minutes and 59 seconds. There are standards accessories available with the devices that are a piston, orifice, spanner, funnel, spoon, mirror, plumb line, material charger, barrel cleaners and so forth. The machine is manufactured on a base plate of heavy metal for long life, safety and stability. The tester is in strict adherence to standards of ASTM D 1238-1992. The instrument has a fine finish in grey and blue color. The product comes with a complete user guide and a conformance certificate that can easily be traced to any labs approved by NABL.    Features:   The instrument is capable of maintaining the accurate temperature needed for the test procedure that ranges from ambient to 400 0C. The temperature controller used in the machine is PID which is a completely microprocessor based. The machine has a high rate of accuracy and repeatability and incorporates a pre-settable timer. The instrument has a feature to cut the test samples automatically which makes the results reliable and test procedure easy. Additionally, the standard accessories and resources are available with the product.   

• Material: Mild Steel
• Power: 220V, 50 Hz
• Features: Automatic sample cutting,Microprocessor based PID controller
• Temperature Range: Ambient to 400 degree C
• Brand: PRESTO
• Accuracy: plus minus1 degree C
• Timer: Digital Preset upto 999 seconds
• Dimensions Of Piston Head: 9.474mm plus minus 0.007mm

• Range:: 0 – 25mm

Cupping Testing Machine is an amazing table top machine which is used to regulate the drawability of metal components, painted metal sheets and non-ferrous metal sheets. The instrument is used to perform accurate and reliable testing of adhesion, strips, hardness, permeability of coatings of paints or varnish in metal sheets, etc. in sheet metal, metallurgy, rubber industry. PRESTO’s Cupping Machine is designed as per standards IS: 10175 (Part I); 1993 & ISO 8490: 1986, ISO 1520:2006

• temperature: 400°C

Presto Melt Flow Index tester is used for evaluating the flow properties of molten plastics or resins. The Melt flow Index of thermoplastic materials is defined as the rate of flow (in grams per ten minutes) of extrudates of molten resins through a jet of a particular length and diameter. The test is carried out under prescribed condition of temperature, load and piston position in a cylindrical cavity inside a heated metallic tube barrel. The Presto Melt Flow Index tester accurately provides all standard terms of temperature and pressure strictly as per standards ASTM D 1238-1992, ISO 1133, IS 2267-1972, IS 2530-1963, IS 10810-1984.

• Feature: Automatic Sample Cutting,Microprocessor-based PID Controller,Compact And Stable Structure
• Temperature Range: Ambient to 350 ºC
• Display: Digital 7 Segment
• Material of Heating Barrel(Cylinder): Die Steel
• Sample Cutting Motor: 2 Torque 7Kg/cm, 60RPM
• Dimensions: 300x644x642 mm

  The melt flow rate of the polymers is one of the essential properties of the materials that will help the manufacturers in determining the rate at which it flows. This property of the material is important as it provides the necessary data on the mass flow rate of the polymer. Thus, to test the melt flow properties of the materials, we at Presto have recently designed a high-quality Melt Flow Index Junior model. MODEL      MFI - Junior This highly versatile melt flow index tester model is a very accurate and reliable instrument for checking the melt flow properties of materials. The tester is easy to use and can be operated with great precision. It comes with a weighing balance and performs automatic cutting of samples.  The Melt Flow Index Tester Junior has been designed with highly advanced features that make it easy for manufacturers to conduct melt flow index tests on the materials.   With its wide range of capabilities, the melt flow index tester is an essential lab testing equipment for the polymer and plastic product testing industry. The melt flow Index of thermoplastic material is expressed in terms of grams per 10 min of extrudate of molten resins that flow through the heated cylindrical barrel.   This high-quality lab testing instrument has been designed as per industrial standards that include ASTM D 1238-1992, IS 2267-1972, IS 2530-1963, and IS 10810-1984. This will ensure accuracy in test results. With the use of this high-quality lab testing instrument, manufacturers of the polymer industry can identify potential processing problems and ensure that products meet performance requirements.