Salt Spray Chamber Dealers in Dlf Industrial Area, Faridabad

Salt spray chamber is widely used in different industries for testing of metals. It tests the resistance of the surface coating against the corrosion. It simulates a weather condition that initiates corrosion in normal working condition. The conditions inside the chamber are accelerated, which is why the behaviour of the specimen can be assessed in a short span of time. Rust testing Korrox III Model is the advanced version of the salt spray tester and is loaded with many features that simplifies the testing. It comes with glass wool insulation to maintain the temperature inside the chamber intact. It comes with an external reservoir tank to ensure the non-stop operation of the machines.  It has a tower style atomiser with baffle top for the uniform fog distribution inside the chamber. It is always advised to keep the salt fog test chamber in the ideal laboratory conditions for the best results. Apart from that while performing the salt mist corrosion test, the sample should not be placed too close to the walls. Otherwise, it would give uneven observations. It comes with a touch screen for operation and communication ports for data logging and transferring.     Salt spray chamber has become an important machine in comparative analysis. To perform the test, the specimen are inserted in the salt laden fog for certain number of hours. The number of hours can be referred from testing standards or internal standards setup by the industry.  The components can be tested before and after treatment with coating. This machine helps in analyzing improvement in performance of the specimen after coating is applied. The fog created by the atomizer has upto 5% of NaCl which is much more than sea water composition. For testing of components to be used at marine atmosphere, this can be considered as the best tool. Apart from sea salt spray test to analyse the performance of the components, it is used for highlighting the defects of the components. Defects like chipping and cracks speed up the corrosion process thus can lead to the early failure of the product. Apart from Korrox III models, presto offers few more models of salt spray chamber that are designed for the different requirements of the different industries. Contact us today to know more about salt spray chamber and its best usage in your industry. We are the leading corrosion test chamber manufacturers.     SPECIFICATION   Triple walled chamber having glass wool filling to prevent deformation and distortion due to high pressures. A Salt Solution (Fog) collection calibrated jar is placed outside the machine for convenient operation. High pressure resistant drum is provided with the instrument. A pressure gauge ranging from 0 to 30 psi and an air regulator – moisture cum oil filter is provided with the equipment. Temperature is regulated via. touch screen. HMI based Touchscreen Model Inbuilt temperature settings Salt Spray Test mode enabled to set parameters according to test sample Temperature setting and Preset Timer functions incorporated in HMI for accuracy and repeatability Corrosion Resistant PT-100 sensor Solid state digital Programmable Temperature Controller Program profile for selecting test parameters and performing the test. Easy Data Management. User can create PID settings, Air Saturator settings, test temperature, test and air purge time, Current test running status display Robust Construction with Fiber reinforced body (Triple wall) Ease of use of sample placements inside the test chamber Pneumatically operated canopy** Air purge after test for fog settlement. PLC based inbuilt PID controller Reservoir Tank and Dosing system for Brine Solution Auto Tuning feature selection Runtime temperature graph Data recording with temperature data reading USB option available Option available to set PV and SV value User can control PID settings through Advanced Hysteresis setting Angle of Canopy maintained in order to restrict flow of droplets directly on the test sample **Only for 250-litre Temperature is regulated via. touch screen. Features of Touch Screen 7 (480*234) 16.9 TFT LCD 65536 colours. USB Host for flash drive. USB 1.1 for high speed screen data downloads. 8 Function keys. 480*234 pixels IP 65 Complaint ARM9 32 bit CPU. 3M Flash Memory. 256K bytes SRAM.     The salt spray test is a quick corrosion test that fabricates a corrosive attack on the samples in order to envisage suitability to use a shielding finish. Temperature range can be set from ambient to 400  C Temperature requirement for the chamber is 35 +/- 2 Degree C Temperature accuracy is +/- 2 Degree C Digital programmable temperature controller cum indicator with special zero corrosion PT 100 sensor. A pressure gauge ranging from 0 to 30 psi and an air regulator – moisture cum oil filter is provided with the testing instrument.   Additional Features The test equipment can be connected to any of the computer system with the advanced mode Ethernet facility. Within your LAN network or using internet connection one can easily join their system to the chamber. No need to invest complete physical attention for chamber operations and monitor. Discover the new-age Remote control technology for managing operations and test cycle observation. To avoid receiving remote controlled commands while on-site operation is running, user can lock the remote ordering and will only allow remote test monitor option. Get a web page view for observing registered test data without installing any software program on your system. Logged in member can even receive email notifications on their computer system for Alarming situations during test. Also, follows Secure Sockets Layer (SSL) protocol for safe data transfer. Control test timing with easy 10 Pre-set timers. HMI based font can now be changed from English to Hindi for User comfort.

• Temperature accuracy: +/- 2 Degree C

Salt spray corrosion test chamber is designed as per the standards to judge the efficiency of rust proof components to resist corrosion due to various atmospheric conditions. The testing instrument is double walled and is built with glass wool insulation, which ensures reliable and accurate results to meet the international standards.

• Temperature Accuracy: +/- 2oC
• Dimensions: 250 – 800 x 500 x 550mm

The Presto salt spray chamber is the most reliable equipment for checking the corrosion resistance of surface coatings when exposed to a salt laden environment. This time-tested product has been specifically designed to assess the rust-proof ability of components to withstand corrosion due to atmospheric conditions. It provides complete flexibility in simulation of real life weathering conditions. The test temperature in the chamber is user adjustable from ambient to +45°C and is controlled by a PLC controlled PID. The touch screen installed in the Presto salt spray chamber is a powerful tool that eases the analysis of corrosion resistance for a wide variety of sample types. A special zero corrosion PT 100 sensor is incorporated in the touch screen. It also has 8 function keys, a 3M flash memory and provides a USB host for a USB flash drive. The Presto salt spray chamber is double walled and is fitted with a glass wool insulation, which ensures that the results are accurate and reliable enough to meet the international standard of testing. The chamber incorporates the latest technology including an Air Flow Meter which regulates the air flow from 0 to 30 psi. It is also equipped with an air jacket heating system which ensures uniformity and reliability. This testing equipment is particularly useful in quality control laboratories, where they are used for comparative sea salt spray test. A see-through cover optimizes test observation by providing continuous direct visual observation of the test item. Further, the Presto salt spray chamber is fully tested before shipment and comes with an instruction manual & a calibration certificate. It strictly adheres to ISO, ASTM, JIS, IS and DIN standards.

Salt Spray Chamber – Korrox III is a touch screen model. It is a very useful laboratory instrument which is used to determine the resistance of materials to corrosion and the effects of other environmental factors on a material before commencing the manufacturing procedure to produce best quality product. Plating on a product is done to save a product from rust and to enhance its life. To test the quality of plating that enhances the life of a product, salt spray chambers are introduced. The testing apparatus is designed and manufactured as per standard test methods to  identify the effectiveness of resistive properties of a material against rust under different climatic conditions. Other models of Salt Spray Chamber are also available - CASS cum salt spray chamber and Salt Spray Eco model with customized specifications.   Salt Spray Chamber Korrox III comprises of a touch screen temperature control panel on the right side of the instrument  which helps the user to set the desired temperature easily. The cabinet of the instrument is designed with double walled reinforced fiber plastic  duly filled with  glass wool insulation. This insulation protects the chamber from corrosive environment which is created in the chamber to test the specimen.  The testing instrument is provided with some standard accessories like air purging, cyclic timer, regulator, gauges, time totaliser and racks to place the specimens. The lab testing equipment complies with ASTM B117; IS: 6910; JIS Z2371; IS: 5528; DIN50021; ISO 3768.   Features:   The chamber of the machine has a double wall and has glass wool insulation so that any deformation could be resisted. There is a jar placed outside the machine for the collection of the salt solution. A high pressure drum is also provided with the machine. The pressure that comes with the instrument has a range of 0 to 30 PSI and has an air regulator along with an air filter. Comes with a digital controller for temperature. The temperature is easily regulated through the touch screen control panel.  Touch screen feature 7 (480*234) 16.9 TFT LCD with around 65536 colors. USB host for flash memory drive. \USB 1.1 for fast transfer of data. Function keys. ARM9 32 bit CPU Complaint with IP 65 having 480*234 pixels 3 MB flash memory. 256K bytes SRAM. Specification:   The temperature range that can be set with this equipment lies from ambient to 600C. The accuracy of temperature obtained from the equipment is ±10C. A digital temperature controller with programmable features is provided with the instrument along with a zero corrosion sensor naked PT 100. There is also a pressure gauge with a range of 0 to 30 psi is also provided with the instrument. 

• Country of Origin: Made in India
• Color: Grey
• Usage/Application: Industrial
• Brand: Testronix
• Pressure adjustment: 1.00+-0.01kgf/cm sq.
• Air Pressure: 1.0-6.0 kgf
• Spray volume: 1.0-2.0ml/80cm sq.

Salt Spray Chamber, Packing Testing Instruments Manufacturers