Sanrok Enterprises Sector 16, Faridabad, Haryana

Lightweight Weight Max. 10% reduction:  585 g → 525 g Weight reduced by the change of the body shape and internal construction Built-in dust protection mechanism (Standard) Dust resistant option now available. (Made to Order: -X85, -X86□) Long stroke One unit can handle workpieces with various diameters. A large amount of gripping force is provided through the use of a double piston  　mechanism, while maintaining a compact design Small auto switches can be directly mounted

A vertically compact configuration has been achieved through the use of 　a rotary actuator as the drive force source. Repeatability: ±0.01 mm Supports class 10 clean room. With auto switch (Series MDHR2: MDHR2)

With the help of a Water Separator, compressed air without water can be obtained. Water Separator Series AMG can achieve a water drop removal ratio of 99%.

Can be used in environments where contact with water or coolant occurs. With water-resistant 2-color indication auto switch Suitable for factory machinery, food manufacturing machinery, car washes, etc.

Can cool high temperature compressed air from compressors down to 40°C or less and efficiently remove moisture from the air. Stable operation is possible even in an environment with a high temperature, high moisture and heavy foreign particles for this water cooled type.

Valve, speed controller and cylinder combined in one unit.

Valve is mounted on a round cylinder. Built-in speed controller for some models. Cylinder with a valve makes it easy to adjust speed. With auto switch (Series CDVJ: CDVJ5, CDVJ3, Series CDVM: CDVM5, CDVM5K, CDVM3, CDVM3K, Series CDV3: CDV3, CDV3K, Series CDVS1: CDVS1, CDVS1K)

2 built-in spool valves Possible to control vacuum adsorption and release with a single valve unit. ・Width 10 mm (Same size as Series SJ3000) With a restrictor that can adjust the flow rate of the release air. Built-in replaceable filter on both vacuum and release sides. Combination of the 4 port solenoid valve SJ2000/3000 is possible. (Made to 　Order) Manifold type No.: SS3J3

Air transmitters used for a variety of All Air System

Country of Origin : India

Material : Plastic

Application : Industrial Use, Pressure Measurement

Weight : 100-150g

Feature : Auto Controller

New cylinder body allows small auto switches to be mounted on 4 surfaces. Strong and stable gripping force can be obtained through the toggle mechanism. Holds workpiece even when the air is shut down. (Safety measures)

With Air Temperature Adjustment Function - Stable supply of temperature and pressure controlled dry clean air.　Possible to supply compressed air with the same conditions and quality regardless of the season. Application example: Supplying compressed air with constant conditions to air bearings mounted on the tool. Built-in filter Nominal filtration: 0.01 μm (99.9% filtration efficiency) Outlet oil mist concentration: Max. 0.01 mg/m3 (ANR) Outlet cleanliness: Particles of 0.3 μm or more: 3.5 particles/L (ANR) or less Power supply available all over the world 　Single-phase 100 VAC, 200 VAC, 230 VAC (50/60 Hz)

Mechanically jointed rodless cylinder incorporated with brake mechanism and stroke sensor.

Weight of these cylinders has been reduced by changing the shape of the rod cover and head cover (max. 10% lighter). Part numbers with rod end bracket and/or pivot bracket available (Not necessary to order a bracket for the applicable cylinder separately). With auto switch, these cylinders are available under the series  - MDB-Z: MDB, MDBW, MDBK, MDBKW, MDBB, MDB□Q

Since sealing tape is not required, there is no concern of insulation. 　(Applicable for painting with high voltage) Easy attachment/removal of piping in narrow spaces

Applicable for use in an environment with water splashing With auto switch (Series CDJ5-S: CDJ5-S, Series CDG5-S: CDG5-S)

Standard Air Cylinders with Square Cover MB! cylinders now come with the option of non-rotating type as well ・Weight: 10% lighter (ø50-100 stroke). Reduced weight by changing the shape of the rod cover and head cover.・Can mount small auto switches on 4 surfaces.・Fastener on auto switch mounting groove for dust-prevention (Option)・With auto switch (Series MDB1: MDB1, MDB1W, MDB1K)

Distance accuracy from the reference hole to the lower surface of the clamp arm is ±0.1 mm. Easy setup with a scale The guide of the appropriate position can be checked visually when adjusting the shim. Reduced width Easy torch entry for spot welding, arc welding and etc.

Vertically compact, lightweight due to the wedge shaped cam construction Ideal for operations which external force is applied to, such as press fitting operations Repeatability: ±0.01 mm Long stroke type: Strokes two times longer than the standard type Gripping of cylindrical workpieces Reliable removal of the workpiece with through-holes and a center pusher

Wedge shaped cam driving mechanism High rigidity with a slide type guide A dust-proof, drip-proof, external force resistant, and environmental 　resistant type that can be used for a variety of applications. To suit the environment, a selection of dust cover materials (chloroprene 　rubber, fluororubber, silicone rubber) or stainless steel (SUS304) fingers 　is available. Long strokes selectable.

For Output, *the applicable protocols differ depending on the series.

Integration of a table and rotary actuator Angle adjustable, ±5º at each rotation end (Double: ±2.5º) Table deflection accuracy: 0.03 mm or less (MSUA) Connection port position: Side ported and axial ported selectable (When a switch 　is installed, side ported only.) Possible to move the auto switch mounting position as desired With auto switch (Series MDSU: MDSUA, MDSUB)

Rectilinear rotation unit that integrates a slim cylinder and a rotary actuator Possible to select types with an air cushion on the linear motion parts Angle adjustable

Double guide type is with improved non-rotating accuracy using a guide roller in the rotating mechanism.

Possible to move the auto switch mounting position as desired Direct mounting Connection port position: Side ported and axial ported selectable 　(When a switch and angle adjuster are installed, side ported only.) Low pressure operation: 0.2 MPa (Size 10), 0.15 MPa (Sizes 15 to 40) Possible to adjust the angle as desired With auto switch (Series CDRB2: CDRB2□W, CDRB2□WU)