Techno Drop Engineers Sector 58, Faridabad, Haryana

We manufacture Metal Plugs which are used in lubrication fittings.

The Take OFF metering injectors are made of zinc (pressure die casting) material. The Take OFF metering injectors works on a different principle unlike the normal metering injectors which discharges the oil when pump is ON. In this case when the pump is ON the TAKE OFF injectors are charged and the spring loaded piston ejects (Pin) out thereby indicating TAKE OFF injectors are charged. When the pump stops the oil is flushed out from the injectors to the lubricating points and the piston goes back. A non return valve in each injectors does not allow oil to go back.

We are engaged in offering straight connector (Taper Threads)

Models TDRL - 5-6 Reservoir Cap. - 5 ltr., Number of Outlets of Plunger Pump-6 nos. Maximum Pr. 250 Kg/ Cm², Motor .25 HP/ 1.8 kw, 3 Phase, 415V, AC, 1340 RPM, Foot Mounting, Output max. 0 to 0.25 cc per stroke (adjustable) at each outlet independently.   TDRL- 15-6 Reservoir Cap. - 15 Ltr., Number of Outlets of Plunger Pump- 6 Nos. Maximum Pr. 250 kg/Cm², Motor .25 HP/ 1.8 kw, 3 Phase, 415 V, AC, 1340 RPM, Foot Mounting, Output max. 0 to 0.25 cc per stroke (adjustable) at each outlet independently.   TDTL 15-12 Reservoir Cap. - 15 Ltr., Number of outlets of Plunger Pump- 12. Nos. Maximum Pr. 250 Kg/ Cm², Motor.25 HP/.18 Kw, 3 Phase, 415V. AC, 1340 RPM. Foot Mounting, Output max. 0 to 0.25 cc per stroke (adjustable) at each outlet independently.     Note: Rreservoir Cap. & No. of Plunger Pump can be increased or decreased as per customer requirement

We manufacture Progressive Distributors Blocks which are used in lubrication fittings.

Model TDN GP-1500-10 Reservoir Cap. - 1500 cc, Discharge - 0 to 10 cc per Stroke (adjustable) max. Pressure - 150 kg / Cm², Reservoir imported Acrylic (Transparent), Outlet port Size - 1 / 4" BSP. TDMPN GP-3000-10 Reservoir Cap. - 3000 cc (3kg), Discharge - 0 to 10 cc per Stroke (adjustable) max. Pressure - 150 kg / Cm², Reservoir imported Acrylic (Transparent), Outlet port Size - 1 / 4" BSP. TDMPN GP-5000-10 Reservoir Cap. - 5000 cc (5kg), Discharge - 0 to 10 cc per Stroke (adjustable) max. Pressure - 150 kg / Cm², Reservoir imported Acrylic (Transparent), Outlet port Size - 1 / 4" BSP.

We manufacture plunger pumps (Pumping Unit) which are used in lubrication fittings.

Techno Drop manufactures wide range of Oil and Grease Mist Lubrication system as per user requirements.The performance of these these systems are excellent. The company has developed a lots of special Mist lubrication system as per customer's requirement. These systems are suitable for spray lubrication. The ratio of mixture of Air & oil at the outlet can be adjusted as per requirement.

Techno Drop has developed different types of oil recirculating systems as per design provided by the customer's This normally contains main oil tank (reservoir), electric motors, pumps, pressure switch, float switch temperature indicator, heat exchanger, pressure gauge, flow switch strainers, duplex filter, drain valve, ball valve, healing elements and electronic control panel.

Techno Drop has developed different types of oil recirculating systems as per design provided by the customer's This normally contains main oil tank (reservoir), electric motors, pumps, pressure switch, float switch temperature indicator, heat exchanger, pressure gauge, flow switch strainers, duplex filter, drain valve, ball valve, healing elements and electronic control panel. Note : Specification should be provided by customers as per their requirement.

Voltage : 240 V

Brand Name : TECHNO DROP

TDMI-1 with Dosage 0.01 cc, 0.03 cc, 0.05 cc, 0.10 cc, 0.16 cc Per Stroke TDMI -2 With Dosage 0.25 cc, 0.40 cc Per Stroke. TDMI -3 With Dosage 1.00 cc, 1.60 Per Stroke Note : Above metering injectors are available in M.S. as well as brass with honed bore Nitrile rubber parts & accurate dosage.

Following kinds of Metal Tubes are available for single shot lubrication system: · Steel Tubes · Nylon Tubes · Hoses

We manufacture Metal Clamps which are used in lubrication fittings.

TDM- 1 One Way ( for Single Injector) TDM- 2 Two Way ( for two Injectors) TDM- 3 Three Way ( for three Injectors) TDM- 4 Four Way ( for four Injectors) TDM- 5 Five Way ( for five Injectors) TDM- 6 Six Way ( for six Injectors) TDM- 7 Seven Way ( for seven Injectors) TDM- 8 Eight Way ( for eight Injectors) TDM- 9 Nine Way ( for nine Injectors) TDM- 10 Ten Way ( for ten injectors)

Techno Drop manufacture high quality electronic timers and controllers. And specially designed for lubrication systems with variable time ranges.Only the mounting and shape of this timer is different. The offer features of this timer is same as above mentioned Model-

Panel Mount Type, ON TIME 5 sec. (fixed), OFF TIME 1, 2, 4, 8, 16, 32, 64, 128 min. (adjustable) with the help of Rotary Switch. 8 LED's bar makes possible to read out the time over with the resolution of 1 minute.

Techno Drop presents superior quality of hand operated oil pumps, hand operated piston pumps for lubricating the different component of machineries. The different models & specifications of pumps have been mentioned here. The performances of these piston pumps are excellent. These pumps are easy to operate at economical price.

Techno Drop presents superior quality of hand operated oil pumps, hand operated piston pumps for lubricating the different component of machineries. The different models & specifications of pumps have been mentioned here. The performances of these piston pumps are excellent. These pumps are easy to operate at economical price.