Test Bench Dealers in Faridabad

Assistance of diligent professionals and modern packaging facility give our clients and us a win-win situation at the time of tailored packaging requirements. The company is acknowledged as a reliable name based in Faridabad(India) and offering products to diverse locations. Features: Precision made Sturdy construction High endurance

• Power: 220V AC, 5 Amp, Single phase, 50Hz
• Testing drop height: 380mm, Max
• Maximum weight of the test box: Up to 60kg
• Motorised lift speed: 100 mm/minute
• Opening Actuation: Pneumatic cylinder
• Least count: 1mm
• Maximum dimensions of the test box: L 500 X W 500 X H 500mm
• Dimension of the floor: 1200 X 900 mm
• *Compressed air required: Filtered, regulated 5 bar, 5 cfm of air flow

Drop tester is widely used in different industry to test the drop strength of the corrugated packages. The machine is innovated after understanding the requirements of carton manufacturing industry. The standard operating procedure of the test is very simple. But due to human interference the test results were not accurate as expected. Thus, to eliminate the human interference, Presto has designed a drop tester.   This machine is equipped with a motorised assembly and a pneumatic system for smooth functioning. The operator operates the machine with remote control. The carton specimen that is to be tested is put on the winged structure style platform. The platform is lifted to a certain height as per the test requirement or test standard. The cartons are dropped in 3 ways; flat surface, edge wise, corner wise. A remote control is used to open the wings of the platform so that box can be dropped. The box is visually observed for the damages. This machine is widely used in industry that used carton packages. Drop tester is the perfect machine to check the endurance of the boxes during storage, transit and conversion.     Top edge holding device with adjustable height as per the test requirement It has twin flaps as dropping platform. It has havel grey and blue combination with zinc chromium coating for corrosion resistance. Body is made up of mild steel for increased shelf life

• Pressure: 0-40Mpa
• Warranty: 1 Year
• Range of flow: 0-500L/min
• Speed: 0-3000r/min

At the initial stages of sourcing raw material and other inputs, we sternly check for the quality used for the same. With the best range of raw material comes the best product. Thus, equal attention is given while sourcing inputs. Automatic handling, storage, and distribution of the products become easy with our automated warehousing system. Also, our storage facility is timely upgraded to meet the changing market scenario.

• Capacity: 40 kg/cm²
• Display: LED (Digital)
• Motor: 1/4 HP Single Phase , 1440 rpm
• Test Range: 1Kg / cm to 38 Kg / cm2
• Dimensions: 540x600x450 mm
• Printer Type: Thermal Printer
• MODEL: PBP - 600 (P)

Bursting Strength Tester - Digital Pneumatic with Printer is the high-end model for estimating bursting strength of the materials like paper, corrugated fibre board, cloth, foil, etc. It is equipped with a thermal printer to print the observation immediately for future use. The machine is designed with pneumatic clamping to avoid any slippage of the sample. Presto’s Bursting strength tester - Digital Pneumatic with Printer is designed to measure the bursting strength of the paper, cloth, corrugated fibre, etc. This high-end model is designed with pneumatic clamping to ensure that there is no slippage of the sample. The hydraulic pressure is applied to the sample via rubber diaphragm. The medium of pressure is glycerin. The pressure is applied on the test sample until it ruptures. The pressure required to burst the sample is considered as the bursting strength. It is represented in kg/cm². It is equipped with a small thermal printer alongside to immediately print the test results.

• Certification: CE Certified
• Application: Industrial Use
• Color: Black, Green
• Voltage: 110V, 220V
• Condition: New
• Automatic Grade: Manual
• Driven Type: Electric
• Warranty: 1year, 6 Months
• Packaging Type: Corrugated Box

• Power: 220V AC, 5 Amp, Single phase, 50Hz
• Dimension of the floor: 1200 X 900 mm

Drop tester is widely used in different industry to test the drop strength of the corrugated packages. The standard operating procedure of the test is very simple. But due to human interference the test results were not accurate as expected.

Escorts manufactures various types of testing equipment, like swtrsctr, rtr, dv test stand etc. Escorts has expertise in designing, developing and customizing test stands as per customer’s requirement and specifications. single car test rigs (swtrsctr) suitable for testing air brake system for freight and passenger cars. Rake test rig (rtr) suitable for testing of air brake system for complete rake of freight passenger stock. Distributor valve standsuitable for testing keo, ke1 & ke2 type of distributor valves or any other make. § test stand with digital pressure gauges interfaced with digital timers to record the various timings. § test stand interfaced with computer so as to have the facility to record performance graphs for various tests. § test stand for various sub-assemblies of dv like r- charger, gp change-over, relay valve pressure transformer, control chamber. Test stand for various air brake accessories test stands for various air brake accessories like hose couplings, centrifugal dirt collectors, brake cylinders, emergency brake valves, angle cocks, pressure reducing valves, choke valve, dv test bench with lsd.

• Material: Mild Steel
• Brand Name: Metafab
• Voltage: 220-240 V
• Warranty: 1 Year
• Application: Automobile
• Automation Grade: Automatic
• Power Source: Electric

• Material: Stainless Steel
• Water Meter Size: DN 15 to DN 50

Auto Electrical Test Bench, offered by us, is compact and enables easy, fast and accurate testing of a wide range of alternators and starter motors.

Microwave Training Kit, horn antenna, Klystron Power Supply

Pressure Test Benches, High Pressure Test Bench