Testing Equipment Dealers in Dlf Industrial Area, Faridabad

One of the famous Textile & Yarn Testing Instruments supplying company.

• Range: 0-100%
• Detector: Light Sensor

Transparency tester is a very important testing instrument in industries dealing with plastic like bottle manufacturing units. Transparency of bottle becomes crucial. Depending upon the requirement of the industry and properties of the packed product, the transparency is pre-decided. To achieve the high level of consistency and uniformity, the transparency testers are used. The transparency tester for Blown bottles is used for testing the transmittance of light through a completely blown bottle which this helps in assuring the best quality of the Bottles with the desired level of transparency. The optical series principle diagram of integration ball type light transmittance is used for the device. The operation of the instrument is done by installing the white standard plate to the instrument. After that, the current reading of the device’s meter (T1) is adjusted to 100 z. Once the reading is adjusted, the amount of incident light is controlled below the level at which the white standard plate is installed. Now the evaluation of the current reading of the meter (T2) is performed. The light transmittance of through the test sample is calculated by the given formula.

• Material: Mild Steel
• Country of Origin: Made in India
• Model Name/Number: . PPRT-0164
• Finishing: Powder coated Havel Gray & Blue combination finish and bright chrome 
• Pendulum Release Mechanism: Manual
• Packaging Type: Box

Cobb sizing tester is used for fast determination of the quantity of water absorbed by a paper or board in a given time. The Water absorptiveness (Cobb value) of a substance is defined as the mass of water absorbed in a specific time by a 1 sq. meter sample of paper, board or corrugated board, under standardized conditions. Cobb Tester measures the amount of liquid penetration into a sheet of Paper, Cardboard or Corrugated Board. The Cobb sizing Tester consists of a cylindrical container clamped to a flat base with a flexible backing onto which the sample is placed. Cobb sizing tester provides a simple, standardized method for fast determination of the quantity of water absorbed by a paper or board at a given time.

• Range :   – 100-1000GU, 10-100GU, 0-10GU.
•      Reproducibility :   – ± 0.5%GU, ± 0.5GU, ± 0.2GU
•      Repeatability  :  – ± 0.2%GU, ± 0.2GU, ± 0.1GU

Testronix’s Digital Gloss Meter Tri-angle is a device which is designed specially to measure the gloss reflection on the surface of the material. The instrument is provided with numerous geometrical angles to fulfill the testing need of a vast number of customers. The device is designed specifically to measure the gloss of a particular surface and to ascertain the amount of light which is redirected from the material. It is an extremely appropriate testing device to test the gloss of different products such as plastics, metals, paints, papers and ceramics. It is very portable and handy testing device which is operated by a handy battery. The gloss of the material can be measured from different geometrical angles i.e. 20°, 60°, 85°. It is highly sensitive and compact device which is available in various models mainly to fulfill different testing purposes. The instrument is used to measure the brightness, whiteness of the various products such as white sugar and many more and also measure the reflectance of the fabrics when placed in different lighting conditions. It provides great correlation of shining or visual gloss when the sample is placed flat. The correlation of the glass changes if the sample is tilted from the flat position. The procedure is used to measure the shine, appearance, and quality of the products. The instrument is more suitable to measure the gloss of paints, brightness of paints, opaque glasses, plastics, ceramics, pigments, papers, powders, clothes and many more.    It measures 5x36mm area of the sample from 85-degree angle, 9x15mm area at 60-degree angle and 10x10m m area from 20-degree angle.  The instrument offers the division value of 0.1 GU.  It provides a measuring range of 0~1000GU from 20 degree, 0~1000GU from 60 degree, 0~160GU from 85 degree.  The instrument offers different measurement units i.e.    

The melt flow index tester (Deluxe Model) is a significant attribute of any plastic material that can help in determining various chemical and physical properties of the materials. The melt flow index tester is a highly precise and accurate instrument that offers exact and accurate determination of melt flow index of a plastic resin. The melt flow index of a plastic resin is termed as the weight of the resin flowing through a capillary tube every ten minutes under an unambiguous load or shear stress. The test procedure includes passing the molten plastic granules from a capillary tube of specific dimensions. A specified load is applied to the test sample with the help of a piston. Apart from that the following are also available for the customers - Melt Flow Index NXG Model.   The melt flow index tester is used for determination of the melt flow rate of various materials such as plastic granules. It is a widely used product in plastics and polymer industry. The instrument is designed and manufactured as per standards set by ISO and ASTM and is mainly focused on meeting the principal conditions necessary for the test procedure. The instrument has a PID temperature controller, and its working is based on a microprocessor. The temperature can vary from ambient to 4000C. The resolution of the instrument is also 0.10C and has an accuracy of ±0.10C. The apparatus comes with a digital timer that is pre-settable and can be extended to 59 minutes and 59 seconds. There are standards accessories available with the devices that are a piston, orifice, spanner, funnel, spoon, mirror, plumb line, material charger, barrel cleaners and so forth. The machine is manufactured on a base plate of heavy metal for long life, safety and stability. The tester is in strict adherence to standards of ASTM D 1238-1992. The instrument has a fine finish in grey and blue color. The product comes with a complete user guide and a conformance certificate that can easily be traced to any labs approved by NABL.    Features:   The instrument is capable of maintaining the accurate temperature needed for the test procedure that ranges from ambient to 400 0C. The temperature controller used in the machine is PID which is a completely microprocessor based. The machine has a high rate of accuracy and repeatability and incorporates a pre-settable timer. The instrument has a feature to cut the test samples automatically which makes the results reliable and test procedure easy. Additionally, the standard accessories and resources are available with the product.   

Specifications: Operating Environment:Temperature: 0-40°C Relative Humidity:

Conditioning chamber is an ideal environmental chamber incorporated with the latest technology, used to create the designated temperature. Presto's Humidity Chamber has the lowest heat loss ratio due to high quality of insulation with imported glass wool. MODEL      PCC -800

• Country of Origin: Made in India
• Display: LCD (Digital)
• Measurement: Adjustable measurement operations available
• Least Count: 0.001mm
• Range: 0-10 mm
• Linearity check: +-0.010 mm with slip gauge

• Country of Origin: Made in India
• Weight: 80kg
• Voltage: 220
• Brand: Testronix
• Display Type: Digital

plastic testing instruments, Testing Instruments, Paper Packaging Instruments

• Type: Ph Meter
• Color: Brown, Green, Grey, Maroon, Red, White
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic
• Body Material: Cast Iron, Plastic
• Power Source: Battery
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Year

• Brand Name: VITO
• Accuracy: +-2.0% TPM, +-1.5 Degree C/ Degree F
• Dimensions: 48 x 173 x 298 mm
• Resolution: 0.5% TMP, 0.1 Degree C / Degree F
• Range TPM: 0 - 40%
• Temperature: 40-200 Degree C / 104-392 Degree F
• IP Rating: IP 65
• Alarm: 3 Color Traffic Light Function
• Battery: 2 x 1.5 V AAA

watt-hour meters, meter reading instruments, metering software

climatic condition testing equipment, Nozzle holders, blast nozzles

Testing Equipment, controllers, temperature measurement equipment