Testing Equipment Dealers in Sector 31, Faridabad

Product Specification Since 2003, we have been engaged in exporting and supplying a high grade range of Alcohol Analyser PAT-110. The offered device is manufactured using the best quality components with cutting edge technologies at our vendors' end. This device is widely used in bars, laboratories, militaries, etc. to check the level of alcohol in blood. Additionally, the provided Alcohol Analyser is available for our valuable clients at the market leading prices in bulk. Key points: Highly durable Easy to use Rapid result Clear display Mini Professional Alcohol Breath Analyser Model : PAT-110 Sensor type:Flat Surfaced alcohol sensor Working Voltage: DC4.5V(3XAAA)Batteries Working Current:

• Power: 220V AC, 5 Amp, Single phase, 50Hz
• Testing drop height: 380mm, Max
• Maximum weight of the test box: Up to 60kg
• Motorised lift speed: 100 mm/minute
• Opening Actuation: Pneumatic cylinder
• Least count: 1mm
• Maximum dimensions of the test box: L 500 X W 500 X H 500mm
• Dimension of the floor: 1200 X 900 mm
• *Compressed air required: Filtered, regulated 5 bar, 5 cfm of air flow

Drop tester is widely used in different industry to test the drop strength of the corrugated packages. The machine is innovated after understanding the requirements of carton manufacturing industry. The standard operating procedure of the test is very simple. But due to human interference the test results were not accurate as expected. Thus, to eliminate the human interference, Presto has designed a drop tester.   This machine is equipped with a motorised assembly and a pneumatic system for smooth functioning. The operator operates the machine with remote control. The carton specimen that is to be tested is put on the winged structure style platform. The platform is lifted to a certain height as per the test requirement or test standard. The cartons are dropped in 3 ways; flat surface, edge wise, corner wise. A remote control is used to open the wings of the platform so that box can be dropped. The box is visually observed for the damages. This machine is widely used in industry that used carton packages. Drop tester is the perfect machine to check the endurance of the boxes during storage, transit and conversion.     Top edge holding device with adjustable height as per the test requirement It has twin flaps as dropping platform. It has havel grey and blue combination with zinc chromium coating for corrosion resistance. Body is made up of mild steel for increased shelf life

• Power: 230V, 50 Hz, single phase
• Size of Hot plate: 8 inch diameter
• Temperature range: Ambient to 200 ºC
• Size of Microscope Screen: 6 inch diameter
• Paint: Powder coated
• Features: Hot plate comfortably accommodates sample, Temperature can be adjusted as per requirement.

  Presto Carbon Black Dispersion Test Apparatus is mainly used for the determination of carbon black dispersion. It finds wide application in the plastic industry. The instrument comprises of a hot plate for sample placement. MODEL      CBD - 501 Presto Carbon Black Dispersion Test Apparatus is mainly used for the determination of carbon black dispersion. It finds wide application in the plastic industry. The instrument comprises of a hot plate for sample placement. The temperature range can be adjusted between ambient and 200 ºC. Presto Carbon Black dispersion Test Apparatus is fitted with a 6 inch size microscope with a magnification power of 100X and 450X. The instrument is manufactured as per IS 4984 & IS 4985 standards.

The co-efficient of Friction Tester is a consistent tool to indicate the starting and sliding friction of plastic films and sheets when sliding over itself or other substance at specified test condition. The Presto Co-efficient of Friction Tester is built on a rigid metallic base plate. The instrument is finished in Autumn Gray & Blue combination painting and bright chrome zinc plating to give it a corrosion resistant finish. It comes complete with an Instruction Manual; the Electrical Wiring Diagram & also a Calibration Certificate traceable to NABL approved Labs. It measures the static and kinetic friction of the test sample, when it slides over itself or other substances in a specified test condition.

• Power: 220V, 50Hz, Single Phase
• Display: LED (Digital)

Puncture Resistance Tester is a consistent tool useful to determine the resistance to puncture of paper and paperboard. Puncture Resistance Tester is used to measure the resistance of paper, paperboard and other similar materials when subjected to puncture and determination of absorbed energy.

• Country of Origin: Made in India
• Weight: 80kg
• Voltage: 220
• Brand: Testronix
• Display Type: Digital

Box Compression Tester Digital Model is used to measure the compression potency, strength or stacking power of beehive crates, cartons, corrugated boxes, paper cases, paper tanks, etc. The tester is a well-engineered apparatus, designed especially to calculate the load range a box or a carton can bear till complete failure. With this highly accurate and stable testing equipment, it becomes very easy to ensure the highest strength of the corrugated boxes and other packaging materials provided to your customers. Apart from digital model acomputerized cum digital model of box compression tester is also available for customers.    Box Compression Tester is used to measure the compression potency, strength or stacking power of beehive crates, cartons, corrugated boxes, paper cases, paper tanks, etc. The Box compression tester is a well-engineered apparatus, designed especially to calculate the load range a box or a carton can bear till complete failure. In this procedure, weight of specific range is chosen to completely crush the specimen in a set time period to measure the maximum stacking load. It is a solid instrument which requires sufficient space in a laboratory to place with user-friendly controls. Cardboard boxes must have sufficient compression strength so that they do not get crushed when stack one above the other at the time of transportation or storage. The compression strength of a carton is gauged simply by placing a test specimen say, corrugated box or carton between two parallel plates. Now set the compression strength and the standard time period from the digital panel to compress the specimen.Two models of Box Compression Tester are available, namely Digital and Computerized cum Digital Model. At the time of storage or transportation, cartons and corrugated boxes were placed one above the other which leads to compression. To ensure the safety of the products kept inside the cartons, it is quite important to measure the quality and the compression strength of corrugated boxes. This development toward enhancing the quality of packaging has now-a-days, contributed a lot to safeguard the products during transportation and storage because the concept of plastic wrapping has completely removed. The compression strength of a product is determined by a number of factors: Size and Measurement of the cartons Depends on the storage techniques like stacking and various circumstances like climate, etc. Material Properties of an object includes stiffness and compression strength. The compression strength is measured in the following units: N, lbf or kgf. It has Digital display. It is operated on a single phase. It is solid model, light in weight, appropriate for stable performance. Highly Stable - Designed on heavy duty iron plates. Heavy duty assembly with two columns. Podium size of the machine is 600mm x 600mm to place the specimen safely. Maximum weight that can be exerted on a box can be of 1000kg. The least count of the instrument is 500g. The power supply required to operate the apparatus is 2.5KW The plate of the apparatus moves towards the specimen at a rate of 10+/- 3 mm per minute (where, the HOME location speed is 2” per minute). It is incorporated with a motor of 3 HP which operates on a 3 phase power supply. It is built-up on a rigid metal base plate. The machine is coated with autumn gray and blue combination paint along with bright zinc plating which provides a rust resistant finish. The testing instrument supplied complete with an Instruction Guide and Electrical Wiring Diagram & along with Calibration Certificate perceptible to NABL approved Labs. Standard: ASTM, IS, ISO, TAPPI, JIS.

• Load cell capacity: 1000 kgf
• Mechanism: Pneumatic
• Dimensions: 560 x 475 x 810 mm
• resolution/ least count: 500 g
• loading speed: 50 mm/min
• Power Requirement: 220V, 50/60 Hz, 5 Amp
• Accuracy: +- 2% full scale (with master load)

• Feature: Multimeter Over load protectionUsed the PTC protection circuit for Resistance frequency measurement
• Brand Name: techtest
• AC Voltage: 200mV 2V 20V 200V 700V
• Model No.: DT9205A
• DC Voltage Accuracy: 200mV 2V 20V 200V 1000V
• Digit Display: 4 Digit

Principle of Rotor Testing The Rotor tester uses the principle of electrical and magnetic effects caused by the circulation of induced currents into the bars of a rotor, which is made to turn at a constant speed, with in a magnetic field produced by a permanent magnet. The induced magnetic field produced by permanent magnet, acts on one slot at a time. The direction of magnetic field is such that the turns of a moving rotor cut the lines of force normally. The induced currents, which are proportional to the field intensity (distance of magnet from the rotor, on the speed of rotation constant) & on the rotor characteristics, produce magnetic fields, the symmetry of which enable a clear observation of the turns in the short-circuited condition. A fixed probe subjected to the magnetic fields produced by the rotor under test, provides the signals, which after being amplified, are applied to the monitor. The synchronized sinusoidal wave pattern from the rotor bars is displayed on the monitor screen. The waveform identifies typically occurring faults in the rotor bars & there is a distant correlation between the result of the inductive test of the rotor bars & the starting torque of a motor.

• Country of Origin: Made in India
• Voltage: 220 V
• Brand: Testronix
• Motor Stroke: Per 30 min
• I Deal In: New Only
• Material: Mild Steel
• Temprature range: Ambient to 45 Degree celsius
• Concentration: 5-0250 pphm
• Static test rotation: 1 rpm
• Least Count: 0.1 Degree celsius

• Application: Taxi and Cab
• Overall Dimensions: 175 X 86 X 55 MM
• Operation Temperature: -10 DegreeC To 85 DegreeC
• Operating Voltage: 10V DC TO 18V DC

• Range :   – 100-1000GU, 10-100GU, 0-10GU.
•      Reproducibility :   – ± 0.5%GU, ± 0.5GU, ± 0.2GU
•      Repeatability  :  – ± 0.2%GU, ± 0.2GU, ± 0.1GU

Testronix’s Digital Gloss Meter Tri-angle is a device which is designed specially to measure the gloss reflection on the surface of the material. The instrument is provided with numerous geometrical angles to fulfill the testing need of a vast number of customers. The device is designed specifically to measure the gloss of a particular surface and to ascertain the amount of light which is redirected from the material. It is an extremely appropriate testing device to test the gloss of different products such as plastics, metals, paints, papers and ceramics. It is very portable and handy testing device which is operated by a handy battery. The gloss of the material can be measured from different geometrical angles i.e. 20°, 60°, 85°. It is highly sensitive and compact device which is available in various models mainly to fulfill different testing purposes. The instrument is used to measure the brightness, whiteness of the various products such as white sugar and many more and also measure the reflectance of the fabrics when placed in different lighting conditions. It provides great correlation of shining or visual gloss when the sample is placed flat. The correlation of the glass changes if the sample is tilted from the flat position. The procedure is used to measure the shine, appearance, and quality of the products. The instrument is more suitable to measure the gloss of paints, brightness of paints, opaque glasses, plastics, ceramics, pigments, papers, powders, clothes and many more.    It measures 5x36mm area of the sample from 85-degree angle, 9x15mm area at 60-degree angle and 10x10m m area from 20-degree angle.  The instrument offers the division value of 0.1 GU.  It provides a measuring range of 0~1000GU from 20 degree, 0~1000GU from 60 degree, 0~160GU from 85 degree.  The instrument offers different measurement units i.e.    

• Type: Ammeter
• Application: Industrial Use
• Color: Green, Grey, Light Green, Sky Blue
• Condition: New
• Display Type: Digital
• Automatic Grade: Automatic
• Feature: Easy To Use, Electrical Porcelain, Proper Working, Water Proof

Water Meters

Material Testing Equipments, Testing Instruments, Paper Packaging Instruments

watt-hour meters, meter reading instruments, metering software

controllers, Process Control Instruments, temperature measurement equipment

climatic condition testing equipment, Steel Shots, Nozzle holders

blood testing equipment