Testing Machines Dealers in Faridabad

• Automatic Grade: Automatic
• Brand Name: Micro
• Warranty: 1 Year
• Gauge Length: 25 mm & 50 mm
• Specimen Width: Upto 30 mm
• Specimen Diameter: 0.5 to 30 mm
• Maximum Extension: 1 micron

• Automatic Grade: Automatic
• Condition: New
• Color: Grey
• Application: Industrial

A tensile strength tester is a testing equipment which is used for examining the pulling force or maximum tensile of a material. This machine is used to test whether a material sustains before breaking or deforming. this is a machine which is used to test the strength of several materials including metals, textiles and polymers. 

• Brand Name: GSI
• Voltage: 220-240 V
• Display Type: Digital
• Power Supply: Electric
• Frequency: 50-60 Hz
• Packaging Type: Wooden Box
• Phase: 3 Phase
• Usage/Application: Industrial
• Torsional Speed: 0.1/0.2 RPM
• Torque Capacity: 100 to 3000 Nm

Presto’s Tensile Testing machine, digital cum computerized model is a highly versatile machine for checking the tensile strength of raw materials and end products. It has a single column vertical movement on low friction ball screws. These testing machines are equipped with latest technology based resources to apply an array of tensile strength. The machine is duly equipped with two jaws namely upper jaw and lower jaw. To operate the machine, the upper jaw is set to be fixed while the lower one can be moved at nominated speed with the help of a motor. The test sampling is actually held between these two jaws. Here, the lower jaw is installed actually to move in order to estimate the tensile strength of the material. The motor is outfitted with a gearbox and with a lead screw arrangement. The testing instrument is also equipped with a special sensor attached to a load cell. The sensor is proficient in judging the force applied on the motionless jaw which ultimately indicates the reading in kilograms. There are some unique hardened lead screws which ensure durability and stability. The stress load tester is equipped with CE standard electrical wirings and a standard motor.  The modular creation of the Presto’s Tensile tester ensures problem-free maintenance and effortless operation.       The machine is available with the capacity up to 1000 kilogram force. The instrument provides the least count of 500 grams. The testing machine offers two displays namely, Computer Display and Digital Display. The instrument offers the accuracy of 2% of the Load Cell capacity. The instrument has Universal ‘S’ Type load sensor. The model provides the travel length between the grips of 25mm – 700mm. Optional Fully Computerized Model is also available. The speed of AC drives with 50 to 500 mm per minute variable. Computer & Printer are not included in the offer. **Computer & Printer are not included in the offer. The Graphical representation depicts Force Vs Time. 10 Sample Reports can be seen at a time on a single report and can be saved on the desktop for future access. Reports can further be E-mailed. Data can be recorded in a spreadsheet. Company details can be recorded on the report. Pass/Fail criteria can be programmed.

• Material: Cast Iron
• Display Type: Analog
• Packaging Type: Carton Box
• Display Size: 2 Inch 2.5 Inch
• Height: 100-150mm
• Overall Weight: 45-70 Kg
• Usage: Hardness Testing
• Specialities: Easy To Use, High Strength
• Minimum Order Quantity: As per Customer Requirement

Testing Machines, Technical Maintenance Service, Hydraulic Pumps

Cupping testing machine is widely used in sheet metal industries for determining the ductility of the metal sheets. This test helps you analyze the level of deformation on sheets when they are subjected to an amount of pushing force. It is also used to analyze the quality of paint which are applied to the metallic substrates for protecting the latter from environmental damage. With the help of this test, the paint manufacturers can easily evaluate the elastic properties of the paint and study the development of cracks in the surface coating once they are stretched with the substrate on applying force.

Box compression tester HMI is the advanced model for testing the compressive strength of boxes of corrugated fibre board. Equipped with a user-friendly HMI (Human Machine Interface), this machine predicts the real working behaviour of the box. A load is applied on the test specimen, until it deforms. This gives an idea about the load bearing capacity of the boxes.

Tubetech Hydro-Testing Machines are designed with automatic handling systems for high output rate and equipped with optional features to comply with API/ASTM/BS/IS standards. Features: OD Sealing Type Oil & Water Intensifiers Closed Circuit Blocking Head for balancing of end thrust Quick Change Tooling Continuous Chart Type Pressure Recorders Computerized Data Acquisition System Disc/Screw Roll/Chain cross transfer type tube feeding system

The Bottle Torque Testing Machine can be used to test the quality of the bottle cap torque so that the products that are packed in the bottles does not get spill off.

• Features: Minimum maintenance,Long functional life,Smooth operations

We are the manufacturers and supplier of this products.

• Country of Origin: Made in India
• Material: SS
• Power: 240v
• Type Of Testing Machines: Vibration Pressure Temprature
• Display Type: Digital
• Phase: 2

HELIUM Leak detection is used to detect micro-openings, porosities, etc. in test parts. The detection of these cracks involves the use of a light tracer gas which is capable of infiltrating the smallest leak quickly: Helium.The detector samples and measures the helium flow rate entering the test part via the leaks.Several methods can be used to test the part. The right one will be selected according to the test part and the measurement accuracy required. Leak rates down to 10-10 mbar / s can be detected both objects with vacuum or overpressure can be examined the objects can be examined during operation the examination can be performed fast and effective non poisonous, non explosive and inexpensive gasses are applied leaks can be detected in due time to prevent safety or operational hazards leaks can be detected in due time to prevent unplanned and expensive shut downs

This testing machine is used to test the bonding strength of the End Caps with the filter element. The complete filter assembly is put in between Holding Discs inside the testing fixture. The End Caps are clamped on the Holding Discs. While the top Disc is stationary, the bottom Holding Disc is pulled down. Reading is noted on a Double Needle Manual Dial Gauge when the bonding of either of the End Caps breaks off.

Model range upto 15KV,PC Compatible - store & print waveforms,Hand held probe for bar-to-bar test,Foot switch for hands free operation.

This machine is a E-check system The machine is developed with an aim of functional checking of sensor, Fog Lamp along with the wire harness of Front & Rear Machine

LEAKAGE TESTING MACHINES ARE USED TO ENSURE NO LEAKAGE IN CI AND ALUMINUM CASTING. PRESSURE DROP TYPE & VOLUMETRIC TYPE WITH AND WITHOUT BUBBLE TEST ARE MADE CUSTOM BUILT . WE USE ATEQ FRANCE CONTROL ELECTRONIC SYSTEM FOR CHECKING MINUTE LEAKAGES.

• Usage: Industrial
• Brand Name: GLI
• Phase: Single Phase
• Voltage: 220 V
• Frequency: 50 Hz
• Power Source: Electric

• Supply Ability: 25 Unit/Units per Month
• Model Number: KEPL
• Lead Time: 45 days
• Place of Origin: Haryana, India
• Packaging Details: wooden box packing

The tensile testing machine is extensively used to determine the tensile strength of various products and materials in different production verticals. The test relies on the principle of CRT, i.e. Constant Rate of Traverse. The instrument is highly stable as it designed using heavy mild steel. The high-quality instrument ensures various safety measures like overload and over travel protection. Tensile Testing Machine is available in three different models - Digital Model,Zeus Ultimo and Digital cum Computerized (Eco) Wintest Model with customized specifications.   The testing apparatus is incorporated with latest technology based components to apply an assortment of tensile strength. The machine is equipped with two clamps, known as an upper clamp and lower clamp. To perform the test, the upper clamp is set to be unchanging, and the lower clamp moves with the nominated speed, which moves with the help of a motor, duly attached to the machine. Here, the lower clamp is installed mainly to move the jaw with a constant speed to estimate its tensile strength. The amazing and most useful creation ensures effortless, safe and problem-free operations.   Features:   It is manufactured using high quality heavy-duty mild steel for better stability and  higher strength. There are many safety measures included in the machine such as overload and over travel protection. A standard motor of branded quality and CE certified wiring is used in the machine. The modular design of the machine ensures better and trouble free maintenance. The machine has a rust free and elegant finish. The machine is available complete along with micro switches, main switch, and other essential accessories along with an instruction guide. The machine is highly safe and has simple operations. The maximum capacity of the instrument is 10- 250Kg which offers a least count of 1 gm to 100 gm respectively. The device is incorporated with single phase induction motor of 1/4 HP and 1440 RPM. The instrument consumes 0.18 KW power. The motor of the instrument is Worm Reduction Type. The digital model offers the travel length from 25mm to 700mm. The instrument is coated with Gray and Blue combination along with bright chrome and zinc plating to provide a corrosion resistant finish.

• Voltage: 380 V
• Operation Mode: Automatic
• Accuracy: +-0.5%
• Frequency: 50 Hz

We are offering hose testing machine.

• Material: Steel
• Automation Grade: Automatic
• Accuracy: +/- 1 Bar
• Impulse Pressure: 70 Bar
• Display Type: Electric
• I Deal In: New and Second Hand
• Usage/Application: Industrial

• Features: Long functional life ,Superior performance ,Smooth operations
• Item Code: HTM-01

We are offering Gear Testing Machine. You can avail from us Gear Testing Machine that complies to international quality standards. The Gear Testing Machine of our company is available in different varieties to meet the client’s demands effectively. This Gear Testing Machine is procured from reliable manufacturers. Availability : Gear Tester(lead and profile) Hob TesterUniversal Tester

Bolt Tension Meter, Salt Spray Testing Machine, Bursting Strength Tester, Bolt Tension Testing Machine Drilling Testing Machine, Coating Thickness Measurement Electromagnetic Membrane Tester, Magnetic Crack Detecto, Reciprocation Bending Tester Instruments for the Measurement of Surface Roughness by the Stylus Method.TC Tighten Tool.

Leak Testing Machine, Ultrasonic Cleaning Machine, Batch Type Washing Machine

Tensile Testing Machine, Packing Testing Instruments Manufacturers

sand testing machine, Industrial Casting, metal handling products