Water Purification Plants Dealers in Charmwood Village, Faridabad

We offer hi-end Reverse Osmosis Plant. In our Reverse Osmosis Plant, the method of Reverse osmosis (RO) is used for purifying water for industrial processes and human consumption. RO can remove mineral salts and contaminants such as bacteria and pesticides. Advances in water treatment technologies have enhanced and complemented the conventional RO process, reducing energy and water consumption, lowering capital and operating costs, and producing purer water with our Reverse Osmosis Plant. Reverse osmosis separation technology is used to remove dissolved impurities from water through the use of a semi-permeable membrane. RO technology involves the reversal of flow through a membrane from a high salinity, or concentrated solution to the high purity, or "permeate", stream on the opposite side of the membrane. Pressure is used as the driving force for the separation. The applied pressure (P) must be in excess of the osmotic pressure of the dissolved contaminants to allow flow across the membrane. Reverse osmosis (RO), also known as hyper filtration, is used by our Commercial & Industrial Brackish Water & Seawater Reverse Osmosis Systems to purify water by removing salts and other impurities. Our Reverse Osmosis Plant is also capable of rejecting bacteria, sugars, proteins, particles, dyes, and other constituents that have a molecular weight of greater than 150-250 daltons. Capacity : Up to 50000 liters per hour Applications : Schools and CollegesHouse and Residential ComplexesHospitals : Produce High purity water use in dialysis unitsCorporate and multistory BuildingsIndustries Our Reverse Osmosis System Removes : Lead from the raw waterBacteria Cysts and Organic Chemicals Dissolved SolidsSuspended Solids Down to five microns in size

We as a Manufacturer and Supplier of Sewage Waste Water Treatment Plant offer you the best solution to treat water on a turnkey basis. The Sewage Waste Water Treatment Plant involves collection, primary treatment, biological treatment and tertiary treatment to make the water recyclable. We make the selection of technology depending on a number of factors such as investment capacity, operating staff at site, plant capacity etc. Our team of engineers makes use of chemical, biological and sludge treatment methods for natural and engineered systems to accomplish the job.Details :Our Sewage Treatment Plants are set up for the treatment of the sewage waste that is produced by canteens, residential colonies etc. These involve collection, primary treatment, biological treatment and tertiary treatment to make it recyclable. We design the Biological Treatment Plants based on proven extended aeration technology, which is either based on suspended growth or attached growth as in the case of Fluidized Aerobic Bioreactor and Submerged Aerobic Fixed Film reactor. The selection of technology is based on capacity of plant, the operating staff at site and the investment capacity. Sewage treatment Plant, or domestic wastewater treatment, is the process of removing contaminants from wastewater and household sewage, both runoff (effluents) and domestic. The task of designing and constructing facilities for treating wastewaters falls to environmental engineers. They employ a variety of engineered and natural systems to get the job done, using physical, chemical, biological, and sludge treatment methods. Its objective is to produce a waste stream (or treated effluent) and a solid waste or sludge suitable for discharge or reuse back into the environment. This material is often inadvertently contaminated with many toxic organic and inorganic compounds.The features of wastewater treatment systems are determined by : The nature of the municipal and industrial wastes that are conveyed to them by sewers The amount of treatment required to preserve and/or improve the quality of the receiving bodies of water. Discharges from treatment plants usually are disposed by dilution in rivers, lakes, or estuaries. They also may be used for certain types of irrigation (such as golf courses), transported to lagoons where they are evaporated, or discharged through submarine (underwater) outfalls into the ocean. However, outflows from treatment works must meet effluent standards set by the Environmental Protection Agency to avoid polluting the bodies of water that receive them.Other Details :Sewage Treatment Plant is characterized as system based on usage of Oxygen/Air in Secondary Treatment Stage (Biological Decomposition of organic matter) Aerobic STP : Oxygen/Air is continuously supplied to the Biological (Aeration) Reactor either by direct Surface Aeration system using Impellers propelled by Pumps or Submerged Diffused Aeration system using Air Root Blowers for Air supply through diffusers. Aerobic condition leads to complete oxidation of Organic Matter to Carbon Dioxide, Water, Nitrogen etc. thus eliminating Odor problem caused due to incomplete oxidation. Also Air supply aids in uniform and efficient mixing inside the tank. Anaerobic STP : Here sewage partially decomposed in closed Biological Reactor in absence of Air that leads to reduction of Organic Matter into Methane, Hydrogen Sulfide, Carbon Dioxide etc. The plant is widely used to treat wastewater sludge and organic waste because it provides volume and mass reduction of the input material largely.

mobile filtration plant, Electronic Motors, Filter, Flanges