Alloy Cast Steel Roll Dealers in Mandi Gobindgarh, Fatehgarh Sahib

These Rolls are special hyper-eutectoid steel rolls alloyed with Nickel, Chromium & Molybdenum. The extra Carbon and special alloys give extra wear resistance and strength. These rolls are statically cast and undergo a special high temperature heat treatment process of double annealing followed by tempering cycles to give a micro structure consisting of fine pearlitic matrix with spherodised / broken carbide.Application : These Rolls are suitable for rolling medium and heavy sections. These rolls are also used for roughing stands of strip mill.

We provide high quality adamite steel rolls. We specialize in all kinds of adamite rolls having Diameter upto 1500 mm and length upto 10000 mm in all international standards.

We bring forth best quality Adamite Steel Rolls that are known for superior quality and high performance among the clients. Avail our Adamite Steel Rolls in varying diameters and lengths to meet the demands of various industries. Available in Diameter up to 1500 mmLength up to 11500 mm

• Thickness: 40-50mm, 50-60mm, 60-70mm, 70-80mm
• Certification: CE Certified
• Length: 3000-4000mm
• Application: Industrial Use, Manufacturing
• Grade: AISI, ASTM
• Color: Silver
• Feature: Color Coated, Corrosion Resistant, Fine Finish, Optimum Quality
• Finishing: Polished

These rolls are statically casted and undergo a special high temperature heat treatment process. Bentex have been able to offer optimum quality Adamite Rolls to our valuable customers. These rolls are suitable for rolling medium and heavy sections where resistance is very important along with considerable amount of strength & toughness. The offered rolls are available with us in customer stated specifications. Details: Extra carbon and special alloy give it extra wear resistance & Strength. Size: As per Requirement of Steel Rolling Mill Ultrasound Tested to check any structural defect.

We manufacture quality range of forged rolls that find application in steel rolling, textile, cement and fertilizer plants. These forged rolls are available in various weights, diameters and thickness to meet varied applications and client’s requirements.

These Rolls are alloyed with NickeL, Chromium, Mar:lganese and Molybdenum with Carbon content between 0.50% and 2.00% as well as little amount of Vanadium is also added for the improvement of better microstructure. So these are capable of a higher mechanical strength with thermal and wear resistance. These Rolls undergo a sophisticated multi-stage high temperature Heat - Treatment (Double Annealing followed by tempering cycle) to give the combination of hardness, toughness and wear resistance required for the particular application. The lower Carbon grades will have a structure consisting offerrite arid fine Pearlite which, as the Carbon content is raised, transitions to a fully Pearlitic structure and on to one containing free carbide in a matrix of fine Pearlite and even some Bainite for the highest Carbon grades. All rolls of this material are statically tangentially single poured.

We are a leading Alloy Steel Rolls manufacturing company with ladle refining and vacuum degassing facility in North India, growing at a fast pace since its inception in the year 1985. We are proud of our strategic achievements.  These Rolls are alloyed with Nickel, chromium, Manganese and molybdenum with carbon content between 0.50% and 2.00% as well as little amount of vanadium is also added for the improvement of better microstructure. So these are capable of a higher mechanical strength with thermal and wear resistance. These rolls undergo a sophisticated multi-stage high temperature Heat – Treatment (Double Annealing followed by tempering cycle) to give the combination of hardness, toughness and wear resistance required for the particular application. The lower carbon grades will have a structure consisting of ferrite and fine pearlite which, as the carbon content is raised, transitions to a fully pearlitic structure and on to one containing free carbide in a matrix of fine pearlite and even some bainite for the highest carbon grades. All rolls of this material are statically tangentially single poured.

adamite steel rolls are chiefly applied for the mills where the strength or biting quality is taken into further consideration than wear resistance. A wide range of Alloy cast Steel Rolls have been developed to meet individual applications, depending on their carbon content and heat treatment.

We are offering alloys cast steel rolls. hardness:-35-40 hardness:-40-45 hardness:-50-55

We are a well-known Manufacturer, Exporter and Supplier of Adamite Rolls in Mandi Gobindgarh. The Adamite Rolls are special hyper-eutectoid steel rolls alloyed with nickel, chromium and molybdenum. The extra carbon and special alloys give the Adamite Rolls extra wear resistance and strength. The Adamite Rolls are statically cast and undergo a special high temperature heat treatment process followed by tempering cycle to give a micro structure consisting of fine pearlitic matrix with spherodized/broken carbide. The Adamite Rolls are suitable for rolling medium and heavy sections where resistance is very important along with considerable amount of strength and toughness. The Adamite Rolls are also used for roughing stand of strip mill.

We are one of the most experienced and technically sound in understanding the requirement of rolls for diffrent rolling mills, we can suggest, manufacture and supply Quality rolls as per requirements for todays modren rolling mills and meet Stringent demands in quality and stability.High Quality liquid metal with Precise chemical composition (Treated with Argon gas) and different heat treatment cycles ensures the manufacture of quality rolls.

To give the best quality products we have setup faclities for Normalizing, Annealing & Heat treatment and are also fully equipped with all testing facilities of Physical, Chemical & Ultrasonic testing. Each of the product undergoes ridged testing and inspction at various stages from Raw Meterial to Finished products. We can forge a single piece fo 50 Kg to 6 Tonnes & in length upto 8 mtrs ( 10 mtrs. on special request.)

Our company is an extensively trusted name in the manufacturing of a large variety of Adamite Rolls. The clients can avail from us strong and hard Adamite Rolls at highly competitive prices as compared to other counterparts in the market. We are the foremost Adamite Rolls Manufacturers and Suppliers in the market. The Adamite Rolls provided by us are hugely demanded in the market. Applications of Adamite Rolls : Bar MillUniversal MillStructure MillsSection MillsProfile MillsGirder MillsRoughing StandWire Rod Rolling Mill RollsAdamite Barrel Rolls Advantages : Higher bite capabilityHigh wear abilityToughness and excellent resistance to fire crackingEasy to fixPrecise in shape Manufacturing Range : Roll Diameter : Upto 24 inches or 610 mm MaxRoll Length : Upto 48 inches or 1220 mm Max3 MT single piece under the scope of manufacturing

We offer high quality steel base rolls alloyed with Adamite or Cr-Ni-Mo (Chrmium, Nickel, Molybednum). These rolls are statically cast and undergo high temperature heat treatment comprising of annealing, normalizing & tempering cycles. Our alloy steel bases feature high mechanical strength, excellent finish and high wear resistance properties.

Alloy Steel Rolls, rubber processing machines, Rotary Shearing Machines

Alloy Cast Steel Rolls, SG iron rolls, Forged Steel Rolls

alloy steel base rolls, Chill Rolls, Steel Ingots

alloy steel base rolls, Steel Ingots, Steel Melting Refining