shri ram panels Mandi Gobindgarh, Fatehgarh Sahib, Punjab

Magnus Table Tennis Table Plywood is a highly dense, compressed and thermoset plastic resin treated panel. The veneers are rotary cut then processed with high degree polymerized  

Magnus Scaffolding Planks have a base of high strength, light weight and mature timber veneer. A special manufacturing technology deliver a product guaranteed to perform to expectation.Suitable for: Replace lumber in fabrication of heavy infrastructure projects like bridges, highways, chemical plants, manufacturing facilities, hotels, shopping malls, commercial centers and the like.Product formatsLength : 1220, 1525, 1840, 2140, 2440, 2750, 3050, 3200 mm Width : 230, 250, 305, 380, 460 mm Thicknesses : 30, 35, 38, 40 mmDensity : 0.65 To 0.75 gm/cm3

Magnus Plywood for Prefabricated Construction is a weather resistant, fire retardant and high mechanical strength product. At the heart is a single core hardwood veneer, which is internally bonded with BWP grade E1 (emission level) standard adhesive. Free from formaldehyde emission, the product is safe for human health. Processing with jet type hot air dryers results in uniform moisture equalization. Double pressing through hot and cold mediums confirms high mechanical strength.Suitable for: Prefabricated structures, structural elements like roofs, false ceilings, racks, walls, flooring, storage areas and more. Product formatsThickness Available: 3,6, 9, 12, 16, 19, & 25Length(in mm): 600 to 3200Width (in mm): 300 to 1675Density: 0.65 to 0.75 gm/cm3

Magnus Mezzanine Floorings are specially designed to bear the load on structure. It is manufactured with selected hardwood in single species to ensure best bonding together and    

Due to metal enforcement, this densified ply does not bend. It has high load bearing capacity. During the manufacturing of metal enforced ply, sheets of metal wires are assembled in between the layers and it is bonded with PF resin in high pressure hydraulic press.Application: It can be used in truck, commercial vehicle flooring & other industrial uses. Also in automobile sector deck, ceiling, paneling back rest seat, anti skid flooring etc.Thickness:12, 16, 19 & 25 mmSizes: 2440 to 3350 mm in length 600 to 1820 mm in widthDensity: 0.845 to 1.00 gm/cm3Warranty: 2 years

Magnus marine plywood is specially treated plywood that is designed to resist rotting in a high-moisture environment. It is manufactured with utmost care in the supervision of technical experts with well selected pieces of core and face veneers. Further, the finished plywood is subjected to proper chemical treatment with water-soluble fixed type preservatives under vacuum pressure to ensure protection against wood destroying organism and to make the product insects, borer, termites and fungi free.Application: Extensively used in making of furniture, partitions, racks/shelves, shutters, under layer for decorative laminates etc. Size (In feet): 6×3, 7×3, 8×3, 6×4, 7×4, 8×4, 7×5, 8×5Thickness: 4, 6, 8, 12, 15, 18, 25 mm

Magnus LVL Runners are an engineered wood product manufactured by compressing multiple layers of thin wood. Being composite, the product overcomes the limitation of traditional wood products as it is warp- and shrink- resistant.Suitable for: Dimensionally stable these runners are ideal for edge forming door and window frames, supports, beam, headers and other construction applications to replace wood.Product formatsSizes : 2440, 2745, 3050 and 3200 mmThicknesses : 25, 37.5, 50, 62.5, 75, 100, 150, 200 mmDensity : 0.65 to 1.20 gm/cm3

Magnus Compreg plywood for Indian Railways is used for making seats and berths of railway coaches. This product conforms to Railway Specifications as per RDSO-IS-C-9407. The veneers are pressed under high capacity hydraulic press under high temperature. Special additional treatment is also given to make product fire retardant according to IS:5509 and IS:15061 standards. The mandatory tests specified by railways are done in our fully equipped laboratories by the trained professionals from railway.Applications – Seats & berths of railway coaches  

Magnus Fire Retardant Plywood offers fire safety support with properties like delayed temperature rise and reduction in gas evaporation resulting in restricting flame Read more: Fire Retardant Plywood [IS:5509:2000]  

Magnus film faced shuttering plywood is manufactured with high density timber in ultra modern hot presses. Manufactured with CPGL technology, it offers extra strength and better bonding when compared to similar products in the market. The panels are most suitable for RCC construction sites. Magnus film face shuttering ply is widely known for the maximum repetitions saving up to 45 percent of costs. Its USP is the mirror finish on both surfaces.Special features of Magnus film faced shuttering plywood are: Magnus film faced shuttering plywood is most effective in RCC constructions. It has a smooth mirror like superior finishing on both surfaces. It saves up to 45% of cost compared to other similar products due to more repetition during shuttering work. Its cross laminated structure between face veneer, core veneer and the film again enhances the strength of ply. After using it as shuttering plywood for many times, it can be re-used for paneling, roofing, flooring, partitions etc. Weight of paper used in film is 125gms Application: It is being used widely in the construction of bridges, flyovers, metro projects, ship building, water tanks, cooling towers, all high rise buildings etc., which need maximum strength and security. Sizes: 1840 x 1220 mm, 2440 x 1220 mm, 2745 x 1525 mm, 3050 x 1525 mm, 3200 x 1675 mmThicknesses: 9, 12, 15, 18, 25, 30 mmWeight: 23, 30, 34, 36, 38 & 42 KG in 12mm 38, 45, 52, 54, 56 & 60 kg in 19mmDensity: 0.65 to 1.20 gm/cm3Do’s Cleaning and oiling the surface increasing the life of plywood. Use screws to fix shuttering plywood. Store it properly stacked under a shed. Care should be taken during transport to avoid scratches. Should be recoated with mould oil before the next use. The edges of a board in pack shall be in a straight vertical line. Don’t Side screwing & nailing strictly prohibited. Don’t use the material without suitable mould oil. Don’t allow the material to fell down from top/certain height of the building. The plywood shall not be dragged over one another as this would scratch the surface. Don’t allow the material to use without sealants at the cut edges. Don’t allow the material to stack without proper drying.   fShare Share Save  

Magnus Compreg – Electrical Grade is an engineered product, manufactured with selected hardwood veneers impregnated with thermosetting resin under high pressure and controlled manufacturing process. It is used for higher electrical insulation purposes.Applications – Power and distribution transformers, rings and studs etc.

Magnus container flooring is produced by selected hardwood veneers. It is an extremely durable transportation flooring that has to withstand the movement of forklifts continually driving over the surface while loading and unloading containers. Application: Floor of containers and heavy load carrying vehicles or other applications that require high strength durable material.Thickness: 28mmSizes: 2440 x 1220 mm to 3200 x 1675 mmDensity: 0.65 to 1.00 gm/cm3Product Name: 28mm, container flooring densified (IICL TB-001)Adhesive: BWP gradeApplication: Cargo container flooring

Magnus COMPREG Plywood for Mould & Die Casting is a technically precise product. The manufacturing and testing processes target creating a quality product with high chemical and mechanical standards. The raw materials like veneer, resin and other chemicals are screened for suitability. The timber is sourced from hardwood species like Gurjan (Dipterocarpus) Steam Beech (Fagus sylvatica). This is then steam treated for oil removal and fibre softening to ensure precision lathe peeling. The controlled curing process is designed to roll out a high quality grade product.Suitable for: Moulds making for injection molding, blow molding, transfer molding rotational molding, casting, patterns, profiles, extrude, die and more.Thickness: 25 to 200 mmSize: 1220 x 120 to 1675 x 3200 mmDensity: 0.95 to 1.40 gm/cm3Adhesive: BWP grade, IS 848:2006

Magnus chequered plywood is one of the best transportation purpose plywood. The ply has a chequered pattern on its surface. Because of high pressure, the panel develops high density that can sustain high traffic on flooring in public & industrial use. This product is approved by ARAI, CIRT and ICAT.Application: This is an anti-skid plywood which is useful in flooring specially in heavy vehicles and large containers. It is useful in automobile sector for ceiling, paneling, seat back rest etc.Thickness: 12, 15, 19 & 25 mmWeight: 33 & 36 Kg in 12 mm, 38 & 44 Kg in 15 mmSizes: 5.5 x 2.5 feet to 10.5 x 5.5 feetDensity: 0.845 to 1.20 gm/cm3

Magnus Compreg for Chemical industry is manufactured with hare wood veneers impregnated with phenol resin under high pressure and temperature. Specific chemical treatment is given to the veneers in the vacuum impregnated chamber to build resistance against hazards by acid and chemicals. Surface of products is also treated with chemicals for durability. Swelling and shrinkage are very low for dimensional stability.Applications – Laboratory shelves, flooring in textile industry and chemical industry, pharmaceutical industry, zinc plants, fertilizer plants etc.  

Magnus block boards are made in moisture resistant & boiling water resistant grade. The wooden battens are seasoned in scientifically run seasoning kiln plants and then get plain with the four sider precision plainer to obtain the uniform thickness of battens.These battens are systematically arranged and care is taken to avoid any gap between the battens. Regular test are conducted to maintain the quality of block boards as per relevant standards.Application: Furniture and partition, panels, beaded doors, interiors of portable houses, bins and racks.Size (In feet): 6×3, 7×3, 8×3, 6×4, 7×4, 8×4, 7×5, 8×5Thickness: 19mm

Magnus automotive fire retardant flooring is specially designed for flooring of public transport automobile vehicles. This plywood is made of selected timber and E1 standard BWP grade adhesive.The chemical treatment of this product delays temperature rise, reduces the evaporation of gases, prevents the oxygen content and flame spread.This plywood is ideally suitable for bus floorings, Berths, Seats, Container Floorings, racks and paneling etc.Application: Interior of public transport buses, city buses, low floor buses, high floor buses, automotive cabin, seats & other optional arrangements and fittings.Length: 2440, 2740, 3050, 3200 mmWidth: 1220, 1525 mmDensity: 0.62 to 0.65 gm/cm3

Magnus aluminium composite bus flooring consists of treated hardwood and five bar 1.5mm thickness aluminium sheet pressed in 3500 tonne capacity hot press by hot cold process. It is a composition of high densified product, unsaturated polyester resin and high degree polymer phenolic resin.Application: Buses deck, heavy automobile floor, paneling, seats, back rest of seats. It can be used for sound proofing, reduction in temperature & vibrations.Adhesive: BWP grade Unsaturated polyester resin with cobalt and celerator spread at all four side of aluminium sheet up to 4" wide. Thickness: 9 to 12 mmWeight: 33 & 36 Kg in 12 mm, 38 & 44 Kg in 15 mmSizes: 8×4 feetAl. sheet thicknesses: 0.8 mm to 1.5 mmDensity: 0.845 to 1.00 gm/cm3

A special kind of plywood made from sound absorbing material. This sound absorbing material is inserted in-between two layers of veneers. When sound passes through acoustic plywood, the intensity of sound is decreased. This product is capable of reducing sound upto 80 decibel. It is best suited for libraries, auditoriums, concert halls, museums and conference halls etc.