Analytical Electronics Services Pvt Ltd Gandhinagar, Gujarat

USB TC-08 - 8 channel thermocouple data loggerTemperature measurement and recording with the TC-08 is very easy — simply plug the TC-08 into a USB port on your computer, plug in your thermocouples, and you are ready to go...Building on the proven design of PicoLog 6, PicoLog Cloud is a free upgrade that introduces many great new features that expand how your Pico data logger can be used. PicoLog Cloud allows all current Pico data loggers and real-time scopes to capture data directly to our new free Cloud service, and can be shared via a link to any browser on a PC, phone or tablet, anywhere in the world. In addition, an API can be used that allows live capture data to be transferred from the Cloud to a 3rd party database or program. - 8 channel thermocouple data logger - Measures from –270 to +1820 °C (–454 to +3308 °F) - High resolution and accuracy - Expandable to 20 units / 160 channels - Supports all popular thermocouple types - Fast sampling rate — up to 10 measurements per second (including CJC) - USB connected and powered - PicoLog 6 for Windows, macOS and Linux data logging software included - PicoSDK drivers for Windows, macOS and Linux includedWide temperature range:The TC-08 thermocouple data logger is designed to measure a wide range of temperatures using any thermocouple that has a miniature thermocouple connector. Pico supply a wide range of suitable thermocouples (see Accessories).All popular types of thermocouple are supported, allowing an effective temperature range of –270 to +1820 °C  (the actual temperature range depends on the thermocouple being used).The built in Cold Junction Compensation (CJC) circuit can also be used as a 9th channel to measure room temperature.Fast and accurate temperature data acquisition:With the TC-08 thermocouple data logger your temperature measurements can be made both fast and accurately.The short conversion time of the TC-08 means up to 10 temperature measurements can be taken every second (cold junction compensation counts as an additional measurement), while the high (20-bit) resolution ensures that the TC-08 can detect minute changes in temperature.  For popular Type K thermocouples the TC-08 can maintain a better than 0.025°C resolution over a –250 to +1370 °C range.Also measure voltage and 4–20 mA current loops! : As well as measuring temperature with thermocouples, the terminal board allows other sensors with voltage or current outputs to be connected.  The optional Single-Channel Terminal Board (see Accessories) plugs into a channel on the TC-08 and turns it into a 20-bit high resolution data logger. Screw terminals allow wires to be attached to the data logger without soldering. The four input ranges (±50 mV, ±500 mV, ±5 V and 4-20 mA) allow a wide range of other sensors and signals to be measured.

Country of Origin : UK

Type : Data Loggers

Display Type : Laptop-PC Screem, Website

PT-104 Platinum Resistance Data LoggerThe PT-104 is a four-channel temperature measuring data logger. It offers the ultimate in resolution (0.001 °C) and accuracy (0.015 °C). Along with temperature it can also be used to measure resistance and voltage - Measures temperature, resistance and voltage - High resolution and accuracy - Works with PT100 and PT1000 sensors - Supports 2, 3 and 4-wire sensors - No power supply required - USB and Ethernet interfaces - Run multiple units on a single PCAccuracy and resolution:Although accurate temperature sensors are widely available, it has been difficult to take advantage of them due to errors caused by the measuring device. Your PT-104, however, is inherently accurate due to its innovative design. Rather than relying on voltage references, which tend to be temperature-sensitive, it uses reference resistors, which are extremely stable with low temperature coefficient and drift. The exact value of each resistor is stored in an EEPROM to provide the ultimate in accuracy (yearly recalibration is recommended). A high-performance 24-bit ADC is used to achieve the 0.001 °C resolution.Temperature:The PT-104 measures temperature using platinum resistance thermometers (PRTs). Both common industry standards (PT100 and PT1000) are supported. The unit is compatible with two, three and four-wire sensors (four-wire PT100 sensors are recommended for accurate measurements). A wide range of PT100 sensors are available for use with your PT-104.VoltageFor voltage measurements, each input connector can be treated as a differential input with ground, or two single-ended inputs. Both inputs must be zero volts or above, though it does not matter which input has the higher voltage.Two voltage ranges are available (0 to 115 mV and 0 to 2500 mV). For the most accurate measurements use the 0 to 2500 mV range.ResistanceWhen measuring resistance, the PT-104 uses a four-wire circuit to give the greatest possible accuracy. Two resistance ranges are available (0 to 375 Ω and 0 to 10,000 Ω). The unit is calibrated for 0 to 375 Ω so this range should be used for accurate measurements.Single channel screw terminal adaptorInterfacing third-party sensors not fitted with the 4-pin mini-DIN connector or measuring voltage or resistance is possible using the PP660 screw terminal adaptor. This inexpensive adaptor has 4 breakout terminals and occupies a single channel of the PT-104.But I need to measure more channels…The PT-104 is capable of measuring up to 4 channels at once. Need more channels? No problem. Using PicoLog you can connect up to 20 PT-104s to one PC – giving you a potential 80-channel PT100 data logger. Alternatively you can use your PT-104 logger with up to 19 other Pico data loggers, such as the PicoLog 1000 multichannel data logger, to create your own custom data acquisition systemThe ultimate in portabilityWith both USB and Ethernet interfaces, the PT-104 can be used in a variety of situations. If you need a portable solution that can be used at various locations and is fast to set up and use, simply connect your laptop to the PT-104 by USB. Need to monitor a situation over a period of hours or days, or from a remote location? Plug your PT-104 into a spare port on your network and then access it remotely either from your LAN or over the internet. Using Power over Ethernet (PoE) technology means that you don’t even need a separate power supply. Please note that PicoLog 6 data logging software only supports Ethernet connection in Windows.

Country of Origin : UK

Synthezised functionsweep generator HP 8018A 50 MHz Serial DataPRBS Generator HP 81104A-05A 80MHz PulsePattern Gen. inc. 1 x HP 81105A module *AS NEW* HP 81105A HP Agilent 81105A HP 8175A05 50MHz DigitalAnalogue Signal Generator HP 8350B Sweeper Mainframe HP 83522A 0.01 to 2.4 GHz RF Plug-In (w)

PicoScope 9300 Series -Sampling Oscilloscopes to 25 GHz with TDR/TDT and Optical models15 to 25 GHz electrical, 9.5 GHz optical, TDR/TDT, 2-channel and 4-channel, compact, portable, USB instruments.These units occupy very little space on your workbench and are small enough to carry with your laptop for on-site testing, but that’s not all. Instead of using remote probe heads attached to a large bench-top unit, you can position the scope right next to the device under test. Now all that lies between your scope and the DUT is a short, low-loss coaxial cable. Everything you need is built into the oscilloscope, with no expensive hardware or software add-ons to worry about.Key specifications-15 TS/s (64 fs) sequential sampling-Up to 15 GHz prescaled, 2.5 GHz direct trigger and 11.3 Gb/s clock recovery-Industry-leading 16-bit 1 MS/s ADC and 60 dB dynamic range-Eye and mask testing to 16 Gb/s with up to 223–1 pattern lock-Intuitive, touch-compatible Windows user interface-Comprehensive built-in measurements, histogramming and editable data mask library-Integrated, differential, deskewable TDR/TDT step generatorTypical applications:-Telecom and radar test, service and manufacturing-Optical fiber, transceiver and laser testing-RF, microwave and gigabit digital system measurements-Radar bands I, G, P, L, S, C, X, Ku-Precision timing and phase analysis-Digital system design and characterization-Eye diagram, mask and limits test to 10 Gb/s-Ethernet, HDMI 1, HDMI 2, PCI, SATA, USB 2.0, USB 3.0-TDR/TDT analysis of cables, connectors, backplanes, PCBs and networks-Optical fiber, transceiver and laser test-Semiconductor characterizationTrigger modes:2.5 GHz direct and up to 15 GHz prescaled trigger:Sampling oscilloscopes accept their trigger from a separate input, either directly for repetition rates up to 2.5 GHz or via a prescaling divider input, for repetition rates up to 15 GHz (14 GHz on 15 and 20 GHz models).Built-in 11.3 Gb/s clock data recovery trigger:To support serial data applications in which the data clock is not available as a trigger, or for which trigger jitter needs to be reduced, the PicoScope 9302 and 9321 include a clock recovery module. This continuously regenerates the data clock from the incoming serial data or trigger signal and can do so with reduced jitter even over very long trigger delays or for pattern lock applications. A divider accessory kit is included to route the signal to both the clock recovery and oscilloscope inputs.9.5 GHz optical model:The PicoScope 9321-20 includes a built-in precision optical-to-electricalconverter. With the converter output routed to one of the scope inputs(optionally through an SMA pulse shaping filter), the PicoScope 9321-20 can analyze standard optical communications signals such as OC48/STM16, 4.250 Gb/s Fibre Channel and 2xGB Ethernet. The scope can perform eyediagram measurements with automatic measurement of optical parameters including extinction ratio, S/N ratio, eye height and eye width. With its integrated clock recovery module, the scope is usable to 11.3 Gb/s.The converter input accepts both single-mode (SM) and multi-mode (MM)fibers and has a wavelength range of 750 to 1650 nm.TDR/TDT analysisPicoConnect 900 Series: the shape of probes to come:The PicoConnect 900 Series is a range of low-invasive, high-frequency passive probes, designed for microwave and gigabit applications up to 9 GHz and 18 Gb/s. They deliver unprecedented performance and flexibility at a low price and are an obvious choice to use alongside the PicoScope 9300 Series scopes.Features of the PicoConnect 900 Series probesPicoSource PG900 Series differential pulse generators:For greater versatility than a built-in signal generator can offer, you may want to separate your high-performance fast-step TDR/TDT pulse source from the sampling oscilloscope and have two instruments to use either stand-alone or together as required.

Type : Sampling Oscilloscope

Certification : ISO 9001:2008

TH2690 fA meter/ Electrometer/ High Resistance Meter Current Range: 0.1fA-20mA Resistance Range: 10PΩ Voltage Range: 1uV-20V Electric Charge Range: 1fC-2uC Built in Voltage Source +/-1000V Temperature measurement Humidity measurement Features ■ 5.0-inch capacitive touch screen ■ 6½-digit measurement resolution ■ Four measurement modes: high resistance meter, voltmeter, ammeter, electrometer independent current and voltage measurement ■ Built-in voltage source: ±1000V, resolution: 700μV ■ Current range: 2pA-20mA, current resolution up to 1fA (10-15A), the internal resistance voltage drops in the lowest current range 200TΩ ■ Support voltage measurement up to 20V, temperature and humidity measurement ■ Time domain view, capture transient signal effects and select specified measurement data to support data recording ■ With dedicated shielding test box   Application ■ Material Science Biomaterials, ceramics, rubber, films, dielectric materials, electrochemical materials, ferroelectric materials, graphene, metals, organic materials, nanomaterials, polymers, semiconductors, etc. ■ Electronic Component Types of transistors such as capacitors, resistors, diodes, sensors, TFT and CNT, photoelectric devices, solar cells, etc. ■ Electronic/non-electronic system Ion beam, electron beam, sensor system, particle measurement, embedded precision instrument, etc.   Specifications Model fA meter/ Electrometer/ High Resistance Meter pA meter/ Insulation Resistance Meter fA meter pA meter TH2690 TH2690A TH2691 TH2691A Measurement resolution 6½ Digit Current measurement 0.1fA - 20mA 0.01pA - 20mA 0.1fA - 20mA 0.01pA - 20mA Minimum range 20pA 2nA 20pA 2nA Resistance measurement 10PΩ 10TΩ ------- ------ Voltage measurement 1μV - 20V 1μV - 20V ------ ------ Input resistance >200TΩ >200TΩ ------ ------ Charge measurement 1fC - 2μC ------- ------ ------ Temperature measurement √ √ ------ ------ Humidity measurement √ √ ------ ------ power source ±1000V ±1000V ------ ------ Minimum resolution 700μV 700μV ------ ------  

The Radio Communications Test Set Marconi 2955B provide comprehensive test facilities for AM, FM and ØM mobile radio transceivers operating up to 1000 MHz. The 2955B is a combination of the following instruments: RF power meter. DC and AF voltmeter. RF counter. AF counter. RF generator. AF generators (two). Modulation meter. AF distortion, SIN AD or SIN meter . Sequential tones decoder and encoder. DTMF decoder and encoder. DCS decoder and encoder. POCSAG radio pager encoder. Sensitive receiver (Option 1 only). Digital oscilloscope. These are automatically connected to the appropriate socket when an operating mode is selected. A large CRT display shows all the generated and measured information for each test and a direct indication of the control settings being used. The 2955B can be used to check a wide range of equipment including simplex and duplex radio telephones and mobiles using selective calling and cross-band repeaters.   Marconi / IFR 2955B Features Comprehensive testing facilities for AM/FM/ØM transceivers to 1000 MHz Full duplex facility test radio telephones and cross-band repeaters Sequential and revertive tones, DTMF and DCS encoders/decoders Menu driven CRT display with 26 stores for recall of standard settings Built-in self test and operator guide System checking of simplex transceivers in less than 3 seconds Operation from any standard AC supply up to 400 Hz or vehicle supply GPIB or RS232 for full instrument control

The PowerXplorer PX5 integrates the most advanced feature set available in a power monitoring instrument, with an easy-to-navigate, color graphical user interface. With high-speed sampling and data capture (1 microsecond/channel), this 8-channel workhorse simultaneously captures and characterizes thousands of parameters, using a range of standard and customizable operating modes. The unique measurement capabilities of the PowerXplorer include capture of low-medium-high frequency transients through peak, waveshape, rms duration and adaptive high-speed sampling, as well as power measurements to clearly characterize non-sinusoidal and unbalanced systems.     DranetzBMI PX5 PowerXplorer - Features Eight channels, 4 voltage & 4 current Intuitive color touch screen Light weight — About 4 pounds, 2 kg — with rugged rubber boot AC/DC applications Samples at 256 samples/cycle Independent voltage & current triggering, cross triggering Detailed event characterization of RMS variations and transients THD/harmonic spectrum and TID/interharmonics spectrum to the 63rd Captures IEEE 1459 parameters for non-sinusoidal and advanced power systems Remote communications—RS-232, Ethernet or USB Battery or AC mode Built in UPS battery with external charger Available with up to 4GB Compact Flash Memory DRAN-VIEW enabled (Windows 2000, XP, Vista, 7) Available with different CTs

The cost of purchasing testequipment can affect the cash flow of a company or departmental budget. We realize this, hence, our RENTAL service helps our customer to utilize the revenue in the right path & produce maximum output of the financial resources.

PicoScope 5000 Series -FlexRes 8 to 16-bit hardware resolution USB Oscilloscope - FlexRes 8 to 16-bit hardware resolution - Up to 200 MHz analog bandwidth - 1 GS/s sampling at 8-bit resolution - 62.5 MS/s sampling at 16-bit resolution - Up to 512 MS capture memory - 16 digital channels on MSO models - 130 000 waveforms per second - Built-in arbitrary waveform generator - 18 serial decoding protocols as standard - Up to 200 MHz spectrum analyzerToday’s electronic designs employ a wide range of signal types: analog, digital, serial (both high- and low-speed), parallel, audio, video, power distribution and so on. All need to be debugged, measured and validated to ensure that the device under test is functioning correctly and within specification.To handle this variety of signal types, PicoScope 5000D FlexRes hardware employs multiple high-resolution ADCs at the input channels in different time-interleaved and parallel combinations to optimize either the sampling rate to 1 GS/s at 8 bits, the resolution to 16 bits at 62.5 MS/s, or other combinations in between – you select the most appropriate hardware resolution for the requirements of each measurement.2 and 4 channel models are available, all featuring a SuperSpeed USB 3.0 connection, providing lightning-fast saving of waveforms while retaining compatibility with older USB standards. The PicoSDK® software development kit supports continuous streaming to the host computer at rates up to 125 MS/s. The product is small and light, and operates silently thanks to its low-power fanless design.Supported by the free-of-charge and regularly updated PicoScope 6 software, the PicoScope 5000D Series offers an ideal, cost-effective package for many applications, including design, research, test, education, service and repair. High bandwidth, high sampling rate:Despite the compact size and low cost, there is no compromise on performance, with bandwidths up to 200 MHz. This bandwidth is matched by a real-time sampling rate of 1 GS/s, allowing detailed display of high frequencies. With a real-time sampling rate of five times the input bandwidth, PicoScope 5000 Series oscilloscopes are well equipped to capture high-frequency signal detail. For repetitive signals, the maximum effective sampling rate can be boosted to 10 GS/s by using Equivalent Time Sampling (ETS) mode.Serial bus decoding and analysis:With its deep memory, the PicoScope 5000D Series can decode 1-Wire, ARINC 429, CAN and CAN-FD, DALI, DCC, DMX512, Ethernet 10Base-T and 100Base-TX,  FlexRay, I²C, I²S, LIN, Manchester, MODBUS, PS/2, SENT, SPI, UART (RS-232 / RS-422 / RS-485) and USB 1.1 protocol data as standard.

Country of Origin : UK

Type : Oscilloscopes

Certification : ISO 9001:2008

 PicoScope 4824A : 08 Channel, 12 bits  High-resolution deep-memory PC/ USB oscilloscopesFeatures of 4824A:- 8 channels-20 MHz bandwidth-12-bit resolution-256 MS capture memory-80 MS/s sampling rate-1% DC accuracy-±10 mV to ±50 V input ranges-10 000 segment waveform buffer-80 MS/s AWG update rate14-bit resolution AWG-Low-cost and portable-SuperSpeed USB 3.0 interface-Split-screen waveform viewing-Up to 70 dB SFDR-Advanced digital triggering-Serial bus decoding - 1-Wire, ARINC 429, CAN, CAN FD, DALI, DCC, DMX512, Ethernet (10Base-T), FlexRay, I²C, I²S, LIN, Manchester, MODBUS (ASCII and RTU), PS/2, SENT, SPI, UART/RS-232. Subject to number of channels available.-PicoScope and PicoSDK® software includedPack contents• PicoScope 4000A Series 2-, 4- or 8-channel oscilloscope• Oscilloscope probes• USB 3.0 cable 1.8 m• Quick Start Guide

Country of Origin : UK

Type : Oscilloscopes, USB-PC Base Digital Oscilloscope

Certification : ISO 9001:2008

Application : R&D, Educational etc...

Feature : Accuracy, Easy To Carry, Light Weight

Voltage : USB POWERED

Condition : New

Driven Type : USB POWERED

PicoScope 6400E models 6824E  6424E 6804E 6404E  6403E - 8-bit to 12-bit FlexRes® ADC - A choice of 4 or 8 analog channels - Add 8 or 16 digital MSO channels - Up to 500 MHz bandwidth - 200 ms capture time at 5 GS/s - Up to 4 GS capture memory - 50 MHz 200 MS/s 14-bit AWG - USB 3.0 interface - 300 000 waveforms per second update rate - PicoScope 6 software and PicoSDK included - 21 serial protocol decoder/analyzers included - Mask limit testing and user-definable alarms - High-resolution time-stamping of waveforms - Over ten million DeepMeasure™ results per acquisition  - Advanced triggers: edge, window, pulse width, window pulse width, level dropout, window dropout, interval, runt and logicPicoScope 6000E Series oscilloscope pack contents:-PicoScope 6000E Series PC oscilloscope-P2056 500 MHz 10:1 passive probes (4)(supplied with the PicoScope 6824E, 6424E, 6804E and 6404E)-P2036 300 MHz 10:1 passive probes (4)(supplied with the PicoScope 6403E)-Quick start guide-12 V power supply, universal input-Localized IEC mains lead-USB cable, 1.8 m-Storage / carry caseTA369 MSO pod pack contents-TA369 8-channel MSO pod-MSO test hooks (pack of 12)-MSO ground lead (8)-MSO ground clip 1-way (8)-MSO ground clip 4-way-MSO ground clip 8-way-MSO digital interface cable\-Storage / carry caseAccessories:PQ219 : 8-channel probe holder kit for PicoScope 6000E SeriesPQ215 : Probe holder kit, no probesTA437 : passive oscilloscope probe: 500 MHz 2.5 mm 10:1, BNC, single packTA480 : passive oscilloscope probe: 500 MHz 2.5 mm 10:1, BNC, dual packTA436 : passive oscilloscope probe: 300 MHz 2.5 mm 10:1, BNC, single packTA479 : passive oscilloscope probe: 300 MHz 2.5 mm 10:1, BNC, dual pack

Country of Origin : UK

Type : PC/USB BASE DIGITAL OSCILLOSCOPE - PICOSCOPE

N1070A(7000Vp-p,50MHz) high accuracy differential Probe  Introduce Bandwidth: 50MHz Max. measuring voltage:7KVp-p Voltage overload protection Input impedance 10MΩ//2pF each side ground Compatible with any brand's oscilloscope. 1% accuracy,compatible with any oscilloscope,standard BNC interface. Model N1070A Bandwidth DC-50MHz Error ±1% Input impedance 20MΩ//1 PF each side ground Output voltage -Swing(into 50 KΩ load) 7V -Offset(typical) ＜±5Mv -Input impedance（typical） 50Ω(for using 1M ohm input system oscilloscope) Supply power -external power leads BNC length 90cm Test length 60cm Weight 500g Side (L×W×H) 245x84x36mm Attenuation ratio 1:1000/100 CMRR(typical) -80dB@60Hz,-50dB@100KHz Maximum input differential voltage（Vp-p） 7000V@1/1000 700V@1/100 DC + Peak AC（Vp-p） 7000V@1/1000＆ 1/100 CMRR 1000V rms CATⅢ      

PicoScope 6000E Series-MSO upto 8ch- Analog and 16 Digital Channel (MSO)-8-bit to 12-bit FlexRes® ADC-A choice of  8 (up to 500 MHz) analog channels-Supports up to 16 digital MSO channels-200 ms capture time at 5 GS/s-Up to 4 GS capture memory-50 MHz 200 MS/s 14-bit AWG-300 000 waveforms per second update rate-PicoScope, PicoLog® and PicoSDK® software included-21 serial protocol decoder / analyzers included-Mask limit testing and user-definable alarms-High-resolution time-stamping of waveforms-Over ten million DeepMeasure™ results per acquisition-Advanced triggers: edge, window, pulse width, window pulse width,-level dropout, window dropout, interval, runt and logicTypical applicationsThese oscilloscopes, with PicoScope 6 application software, are ideal for design engineers working with high-performance embedded systems, signal processing, power electronics, mechatronics and automotive designs, and for researchers and scientists working on multichannel high-performance experiments in physics labs, particle accelerators and similar facilities.The PicoScope 6000E Application Programming Interface (API) provides programming access to the full set of advanced hardware features and can be used to develop diverse custom and OEM applications. Mixed-signal operationWhen fitted with optional 8-channel TA369 MSO pods, the PicoScope 6000E Series adds up to 16 high-performance digital channels to up to eight analog channels, enabling you to accurately time-correlate analog and digital channels. Digital channel bandwidth is 500 MHz, equivalent to 1 Gb/s, and the input capacitance of only 3.5 pF minimizes loading on the device under test.Digital channels, captured from either parallel or multiple serial buses, may be grouped and displayed as a bus, with each bus value displayed in hex, binary or decimal, or as a level (for DAC testing). You can set advanced triggers across the analog and digital channels.The digital inputs also bring extra power to the serial decoding feature. You can decode serial data on all analog and digital channels simultaneously, giving you up to 24 channels of data – for example, decoding multiple SPI, I²C, CAN bus, LIN bus and FlexRay signals all at the same time!

As technology has become more digitally oriented, there is an increasing demand for logic analyzers to detect, analyze, and observe digital signals. The GLA-Series has a maximum of 32 channels, 200 MHz internal sampling rate, 32M bits of data memory and advanced trigger settings. It provides engineers and professionals with a device to adequately handle today's digital system analysis.

Easy-operating,Designed for Linear IC (OP, Comparator, Opto-Coupler, Regulator, Special Function Device, Transistor Array) Small, Portable, Light and Power-Saving, Battery Operation Average Search Time : 0.8 Second Display: 16 Characters in 1 Line Test Pin: 14 ~ 24 Test Voltage: +- 5V Empty-Load and Auto Power Off

Our LCR Meter range includes two main series, the LCR-8000G & LCR-800 series. Depending on the model, these series feature frequencies of 2kHz to 10MHz, and accuracies as high as 0.05% ~ 0.1%.

Features   ■ Test frequency: 10Hz-130MHz   ■ High precision: using automatic balance bridge technology, four-terminal pair test configuration   ■ High stability and consistency   ■ High speed: the fastest test speed up to 5ms   ■  High resolution: 10.1-inch capacitive touch screen, resolution 1280*800   ■ Three test methods: point test, list scan, and graph scan   ■  1601 point multi-parameter list scanning function   ■  Four-parameter measurement   ■  4-channel graphic scanning function, each channel can display 4 curves, 16 kinds of split-screen display modes for channels and curves   ■  Powerful sorting: 10 grades sorting in LCR mode   ■  Graphic scanning mode, each curve is sorted individually   ■  High compatibility: Support SCPI instruction set, compatible with KEYSIGHT E4990A, E4980A, E4980AL, HP4284A       Applications   ■ Passive component:   Impedance parameter estimation and performance analysis of capacitor, inductor, magnetic core, resistor, piezoelectric devices, transformers, chip components and network components   ■ Semiconductor component   Parasitic parameter test and analysis of LED driver integrated circuit C-VDC features of varactors   Parasitic parameter analysis of transistors or integrated circuit   ■ Other components   Impedance assessment of printed circuit boards, relays, switches, cables, batteries   ■ Dielectric material   Dielectric constant and loss angle evaluation of plastics, ceramics and other materials   ■ Magnetic materials   Magnetic permeability and loss angle assessment of ferrite, amorphous body and other magnetic materials   ■ Semiconductor materials   Dielectric constant, electrical conductivity and C-V characteristics of semiconductor materials   ■ Liquid crystal cell   Dielectric constant, elastic constant and C-V characteristics of liquid crystal cell       Specifications   Model TH2851-130 Display 10.1 Inches TFT LCD Display 1280×RGB×800, Touch Screen AC Parameter Cp/Cs, Lp/Ls, Rp/Rs, |Z|, |Y|, R, X, G, B, θ, D, Q, VAC, IAC DC Parameter VDC, IDC,  DCR Test Frequency Range 10Hz-130MHz Resolution 1mHz Relative frequency tolerance ≤±0.0007% Test Level AC Voltage 5mV—2Vrms Resolution 1mV AC Current 50uA—20mArms Resolution 10uA DC Bias Voltage 0V-±40V Resolution 1mV Current 0mA-±100mA Resolution 40μA Test terminal configuration Four Terminal Pair Output impedance  25Ω / 100Ω Typical Test time(Speed) Five Shift:  1(Fast)—5(Accuracy) 1:  2.5ms  2:  10ms   3:  40ms   4:  80ms   5:  400ms (Does not include the arithmetic average of the communication time, each frequency test speed will be slightly different) Max Accuracy 1kHz: 0.08% 1MHz: 0.08% 2MHz: 0.5% 10MHz: 1% 130MHz: 5.0%                 Test Display Range E means 1,000,000,000,000,000,000 Cs, Cp -9.99999EF -+9.99999EF Ls, Lp -9.99999EH -+9.99999EH D -9.99999E -+9.99999E Q -9.99999E -+9.99999E R, Rs, Rp, X, Z -9.99999EΩ -+9.99999EΩ G, B, Y -9.99999ES -+9.99999ES Vdc -9999V -+9999V Idc -9999mA -+9999mA θr -999999rad -+999999rad θd -180.0deg -+180.0deg Δ% -999999% -+999999% Multi-function parameter list scan 1601 points, each point can be set to average, and each point can be sorted separately Sweep parameters: measurement parameters, test frequency, AC voltage, AC current, DC BIAS voltage, DC BIAS current Graphic scan parameter Frequency, ACV, ACI, DCV, DCI Types Logarithmic, linear, frequency segmentation Points 2-1601 Number of channels 4 Number of curves 4 Per Channel Split Screen 14 (Channel and Cruve) Equivalent circuit analysis 3-element model: 4, 4-element model: 3 Sorting 10 levels of sorting in LCR mode; each curve in scan mode is sorted individually Interface RS232C, USB HOST, USB DEVICE, LAN, GPIB, HANDLER, VGA, HDMI Power-on warm-up time 60 Minutes Input Voltage 100-120VAC/198-242VAC Option, 47-63Hz Power consumption Max 150VA Measurement （WxHxD）mm3 428x220x325 Weight 14.5kg  

True differential measurements in high resolution The PicoScope 4444’s four inputs allow you to make true differential measurements. The maximum input range at full scale is ±50 V (±1000 V CAT III using the PicoConnect 442 probe), and the maximum common-mode range is also ±50 V (also ±1000 V with the PicoConnect 442 probe). You can set the scope to measure at resolutions of 12 or 14 bits, far better than the 8-bit resolution typical of many oscilloscopes. The deep capture memory (up to 256 million samples shared by the active channels) is another advantage, allowing you to carry out long captures without lowering the sampling rate. Power quality - spikes, noise, dips and interruptions Disturbances on the mains supply can cause a variety of problems ranging from computers crashing to, in more extreme cases, equipment damage. The PicoScope 4444 is ideal for the long-term monitoring of single-phase and three-phase systems to spot and record any variation from the norm.The waveform opposite shows the voltage of a three-phase supply (plus the neutral return current). If the voltage waveform crosses into the shaded area, the alarm function beeps and the waveform is stored for later review. Tests can be run for days or even weeks and the resulting high-resolution waveforms help identify whether mains quality is a factor.

HA-820A (400KHz,800V) Digital display high voltage Digital display high voltage amplifier. AMPL times,current,voltage are diplayed on the pannel. It also add more protection design. More humanize，practical.   Model HA-820A Output Output DC Voltage(Max.) 400V DC Output AC Voltage(Max.) 800Vp-p Output DC Current(Max.) 100mA DC Output AC Current(Max.) 200mAp-p Output Power(Max.) 40 VA Bandwidth DC-400KHz(-3dB) Slew rate(Typ.) 500V/us Output Resistance (Protection SW OFF) 10Ω Output Resistance (Protection SW ON) 5KΩ/40watt Max. Loading value 4KΩ@Range±400V;2.5KΩ@Range±250V Input (normal/Max.) ±5V(Max.±10V) AMPLtimes 100(Max) DC OFFSET(2 options with 2 Rout) ±250V/± 400V Monitor(Output ratio) 100：1 Protection 1.Output used FUSE 2.Protection SW protection resistance(ON/OFF) 3.Output short circuit, overload, over current, over voltage protection 4.INPUT/OUTPUT overload protection 5.Overheating protection   Measuring display(0~1MHz)   Range Resolution Accuracy Max. voltage ±400V 0.1V ±(1%+2V) Min. voltage ±400V 0.1V ±(1%+2V) Peak to peak voltage 0~800.0V 0.1V ±(1%+2V) Offset voltage ±400V 0.2V ±(1%+0.4V) Output current 0~100.0mA 0.1mA ±1% Setting AMPL times 0~100.00 0.05 times - Output bias ±400V 0.2V 1%    

500VA AC Test Capacity 240x64 Ice Blue Dot matrix LCD Sweep Function for DUT characteristic analysis Insulation resistance measurement up to 50GΩ High intensity flash for caution & Status indication Safety INTERLOCK function Zero Crossing Turn-on Operation True RMS Current Measurement High resolution: 1uA for measuring current, 2V for setting voltage Remote terminal on the front panel for “start” and “stop” control Max. 100 memory block for test condition (step) setting. And each step can be named individually.

1、Including 7 measurement functions in one: oscilloscope, waveform generator, multimeter, FFT spectrum analyzer, frequency. counter, protocol analysis, amplitude-frequency curve analysis. 2、350 MHz / 500 MHz oscilloscope bandwidth, 5 GSa/s sample rate. 3、Standard 400MB memory depth. 600,000 wfms/s refresh rate, easy to capture exceptional and low probability events. 4、10.4-inch multi-touch screen. Model MDO 7500 MDO 7500A Channels 2 4 Bandwidth 500MHz 500MHz Rise time 0.7ns 0.7ns Sampling rate(single) 5GSa/s Sampling rate(dual) 2.5GSa/s Sampling rate(four) 1GSa/s Storage depth 400M Input coupling AC,DC,GND Input impedance 1MΩ±2%,and 15pF±5pF paralleling,50Ω±2% Vertical resolution 8 bits Time base range 500ps/div-1000s/div,step by 1-2-5 Trigger mode Auto,normal,single Trigger Edge,video,Pulse,Slope,Runt,Windows,Timeout,Nth Edge,Logic,I2C,SPI,RS232/UART,LIN,CAN Display screen 10.4 inch Touching screen √ Functional generator 50M single channel function generator DMM Optional Display resolution 800×600 Waveform capture rate 600000wfms/s Dimension 422x226x135mm Weight 5kg Operating temperature 0℃- 40℃  

We are the leading manufacturers, exporters and supplier of this products.

Warranty : 1 Year

Our LCR Meter range includes two main series, the LCR-8000G & LCR-800 series. Depending on the model, these series feature frequencies of 2kHz to 10MHz, and accuracies as high as 0.05% ~ 0.1%.

Our LCR Meter range includes two main series, the LCR-8000G & LCR-800 series. Depending on the model, these series feature frequencies of 2kHz to 10MHz, and accuracies as high as 0.05% ~ 0.1%.