Ingersoll-Rand Evolution Refrigerant Air Dryer
40,000 - 200,000 Per Piece
1 Piece (MOQ)
FEATURES : 3 in 1 Heat exchanger Evolution design – specifically for the application Engineered for a low pressure drop Robust aluminum construction reduces corrosion Stainless steel demister ensures moisture removal Advanced Controls Full feature, multi function control panel Energy saving mode – shuts dryer off during low loads Alarm display High and very high dew point Low dew point Probe failure Fan speed indication Remote alarm contact
Compressed Air Dryer
50,000 Per Piece
1 Piece (MOQ)
In compressed air Dryers, two vessels filled with desiccant is provided which cycle automatically, producing dry air continuously. In these units, wet air enters the bottom of one Vessel and passes upwards through the desiccant bed where the moisture is adsorbed. The clean dry air comes out from the top. A small portion of dry air is passed downwards through the desiccant bed in the second vessel which is under re-generation. The moisture-laden purge air is then vented out to the atmosphere.The purge loss is around 7.5% of the total air flow. At the preset interval, the vessel changeover automatically, and the Dry air is available continuously without any surges. Easy Operation: This is simplest type of air dryer with Activated Alumina / Molecular Sieves drying agent. This is virtually maintenance free, fully automatic, and requires no attention for year. compressed air type dryers do not require any heating re-generation and therefore are very simple in design and maintenance free. Advantages: Due to its inherent simple design, investment in this type of dryer is the cheapest and the payback on this investment is very quick Low-Temperature operation reduces corrosion in tower and desiccant lasts longer Power requirement is 60 watt only for Solenoids Valves Operation
Best Deals from Compressed Air Dryer
Compressed Air Dryer
32,000 Per Piece
1 Piece (MOQ)
Atlas Copco Compressed Air Dryer
30,000 Per Piece
1 Piece (MOQ)
Refrigerated Air Dryer
Get Price Quote
51 piece (MOQ)
Desiccant Compressed Air Dryer
Get Price Quote
FS CURTIS air dryer offers total drying solution for compressed air. Drying Cycle: Moist air from the compressor is sent through the coalescing filter where water and oil coalesce and get purged through the auto drain valve. The relatively clean and moist air passes through the drying tower filled with desiccantand gets completely dried up to the desired dew point. The desiccant fines, if any, are completely removed through a built in after filter. Regeneration Cycle: During this cycle, the sudden depressurization brings out water molecules trapped in the desiccant pores to the surface of the beads. A small portion of the dry compressed air from the drying tower then passes over the desiccant through the regeneration orifice, to ensure complete regeneration of the desiccant.
Air Compressor Air Dryer
22,000 Per Piece
1 Piece (MOQ)
80 CFM Refrigerator Air Dryer
52,000 Per Piece
1 Piece (MOQ)
Atlas Copco Refrigerated Air Dryer
50,000 - 400,000 Per Piece
1 Piece (MOQ)
Desiccant Compressed Air Dryer
25,000 Per Piece
1 Piece (MOQ)
Refrigerated Air Dryer , Automation Grade
Get Price Quote
BEI - 10 AD - Refrigerated Air Dryer, 230 V
46,500 Per Piece
1 Piece (MOQ)
Heatless Air Dryer
30,000 - 3,000,000 Per Number
1 NO. (MOQ)
Heatless Air Dryer
Get Price Quote
A Heatless Air Dryer consist of two towers, which, alternately cycle on drying and regeneration. Each tower is filled with a bed of adsorbent desiccant. When one tower is on drying cycle, the desiccant adsorbs moisture from the incoming wet air stream and the other tower is on a regenerating cycle, which, a small portion of the super dried air passing through the desiccant to pick up and remove the adsorbed moisture, which is then vented to atmosphere. The towers are alternated in such a manner so that Dry desiccant is always in contact with wet compressed air, resulting in a continuous supply of Dry Air downstream. The process is automatically reversed from one tower to another by a microprocessor based sequenced timer. Dryer must be protected against water and oil suspended in the form of drops or finely dispersed mist. If the risk for such condition exists, a high efficiency pre-filter must be installed before the dryer. In regular course a ceramic candle Pre-filter is installed prior to the dryer to take care of incoming dust, dirt and foreign particles. By default, a ceramic candle After-filter is installed after the dryer to take care of desiccant dust carry forward in the dry air. The Pearl make heatless dryer is capable of providing a -40°C or lower atmospheric dew point and features a non-lubricated 3-way pneumatic switching valve. The operation is fully automatic and continuous without attention. Features: Pressure equalization: ensures dry air supply is continuous and at constant pressure. Electronic Timer: Highly precise and fail-safe with excellent repeatability Low Dew Point: Constant atmospheric dew point of - 40°C or below. Instant dry air availability: Easy to install & operate, requiring very few, low-cost spares. Low Power Consumption: Approximately 50 Watts only. Equipped with Silencers: low noise level.
Refrigerated Air Dryer
22,000 Per Piece
Heatless Refrigerated Air Dryer
15,000 Per Piece
1 Piece(s) (MOQ)
Desiccant Air Dryer
45,000 Per Piece
1 Piece (MOQ)
Refrigeration Air Dryer
30,000 Per Piece
1 Piece (MOQ)
Heatless Air Dryer
25,000 - 80,000 Per Piece
1 Piece (MOQ)
Features Compact design Pre Filter and after filter are standard Counter flow drying and regeneration Low pressure drop Automatic Re-pressurization fixed purge orifice.
Compressed Air Dryer
100,000 Per Piece
1 Piece(s) (MOQ)