Back Back
Valve Transducers
The Flucon FC600 series Explosion proof I/P (current to pressure) Valve Transducers convert a 4ﾃ｢20m electrical current signal to proportionally linear pneumatic output. The unique conversion technology utilizing open loop control provides a high level of accuracy and repeatability for the operation of actuated valves. A low mass control circuit provides consistent output in high vibration applications. This compact unit is housed in an explosion proof enclosure that is designed for pipe, bracket or direct manifold mounting. This explosion-proof and intrinsically safe field device is available with an integral volume booster or as a low-flow signal converter that directly mounts to a pneumatic valve positioner. The Flucon FC600 series has worldwide agency approvals for use in hazardous areas. Multiple choices for wiring and porting simplify installation and decrease the time required to do so. In addition to standard wall, panel or pipe mounting, optional DIN rail and manifold mounting kits are available. The Flucon FC600 series Multifunction Manifold provides a common supply port and individual shutoff valves for sets of 3, 5, 10 or 15 units. Integrated Characteristics : Compact Design.Low Air Consumption.Low Power Consumption.Integral Volume BoosterFlexible Adjustments of Zero & Span.Standard Process Inputs.Vibration and Position Insensitive. Download
...more
smart positioner
FLUCON Smart Valve Positioner, using all-digital operation and the operation for stroke or angle oftravel of the pneumatic actuator. Action methods are single or double acting type. The Valve Positionlocator is a two-wire instruments, to provide PID regulation function can be used as a local regulatorand the positioner integrated intelligent control devices. Valve Position Locator provides 4 ~ 20mAinput signal from the control, PID control output from the +24 VDC power supply circuit in series with the Position Transmitter operation. It will also have completed the regulator output current signalsinto the main function of regulating valve drive, but also work with in accordance with the valve stemfriction, offset by transfer medium pressure caused by unbalanced forces, thus opening the valve corresponding to regulator output control signals to achieve the correct positioning. Support the HART Protocol. Features and Functions ﾂ 1 Locator within the digital control, high reliability, good stability, small size, light weight, etc2 Debugging convenient, without any tools, just press a few buttons on the locator interface, to complete the commissioning.3 Feature set is simple, when adjusted to the working / counter mode, the valve on / off type, output characteristics, such as stroke or rotary direct settings.4 Intelligent control of the valve medium wave, travel value, actuator leakage analysis can judge, the police, the valve optimization.
...more
pneumatic positioners
700 FC Series Valve positioners converts a controller output (usually 3 to 15 psig or 4 to 20m ADC) to LinearlyRotary proportional TravelRotation & Pneumatic outputs. The Valve positioners are based on a force balance design for control applications that requires a high degree of reliability & repeatability at an economical cost. Optional NEMA 4X (IP65IPG6)-explosion proof versions allows for splashdownexplosive atmosphere and outdoor installation.
...more
Limit Switches
Description ﾂ The FLUCON 300FC Series Limit switch visual indicator is a mechanical device which graphically displays the angular displacement (rotary indication) of a quarter turn valve or any other device operating between 0ﾂｰ & 90ﾂｰ. The limit switch indicator represents a true indication of valve position. It is infinitely adjustable and delivers a 100% change of indication, displaying 90ﾂｰ of rotation by utilising an amplified mechanical drive. ﾂ Application ﾂ The Flucon 300FC Limit Switches are used for visual indication and contact output of the Rotary quarter turn actuator and optionally get the 4~20mA DC with respect to the rotary valve movement. ﾂ Used in ﾂ Petrochemical Processing Systems. Energy Management. HVAC Systems. Textile Processing Systems. Pharmaceutical Processing System. Paper & Pulp Handling Controls. Power Plant. Fertilizer Industries.
...more
ip Transducers
The Flucon 500 FC Series transducers are ideally used to convert current or voltage input signal to a nearly proportional pneumatic output pressure. This versatile instrument is rugged and reliable force balance transducers for use in both process control and industrial applications, for standard process control applications which typically utilise 3 to 15psig output and industrial & high pressure application which typically utilise pressure output up to 120 psig. Flucon 500FC Series transducers combines low cost, high accuracy and minimum air consumption with field proven technology. Versatile design features and rugged, compact housing with a choice of CMRI and ATEX* approved versions for explosion proof or intrinsically safe operation when used with a suitable barrier. ﾂ ﾂ Principle of Operation ﾂ The Flucon 500 FC Series transducer is a force balance device in which, when electrical current is passed through the coil of transducer magnetic field is created which acts on the magnet assembly, casuing the anvi & diaphragm to move away from or forward the nozzle (flapper nozzle) depending on the direction of current flow. Motion at the nozzle assembly is proportional to the amount of current passing through the coil.The flapper/anvil move away from or forward towards the nozzle creates back pressure which acts as pilot pressure to an integral booster relay. when input electrical current increases (or decreases for reverse acting) causes proportional output pressure increases.Zero and Span are calibrated by turning easily accessible adjusting screws on the front face of the unit. The zero adjusting screw causes the nozzle to move relative to the flapper/anvil. The span adjusting screw is a potentiometer that limits the current through the coil. A thermistor circuit in Series with the coil provides temperature compensation.
...more
Electro-Pneumatic Positioners
Description ﾂ The FLUCON 703/704 FC Series Electro - pneumatic positioners are used as final controlling element for operation of pneumatic Rotary/Linear valve actuators in correspondence with an input signal of 4-20 mA DC or split ranges.The Positioners are based on a force balance design for control application that requires a high degree of reliability and repeatability at an economical cost.The Positioners can handle the supply pressure up to 100 psig for higher pressure industrial pneumatic and process control system requirements. ﾂ Integrated Characteristics ﾂ Suitable for Rotary / Linear Actuators. Low Air Consumption. No resonance at 5~200Hz. Prevents hunting by using Orifice for small size actuator. Simple Conversion to Direct Acting or Reverse Acting. Precise Calibration with simple SPAN and Zero Adjustments. Suitable for Single/Double acting Actuators. Can control split range with simple operation without replacing any parts. Extremely Vibration Resistance Design. Easy Maintenance. Corrosion-Resistance Aluminium Diecast Body. Options available: Position Transmitter (4-20mA DC). Two Limit Switches.
...more
800 FC Series Valve Positioner
800 FC Series Valve positioner which utilizes a unique spool valve, is a cam characterized, force balanced instrument that is simple, rugged, and very user friendly for calibration and maintenance. The NEMA 4 X housing, is cast aluminum, with an electro-statically applied polyester coating for excellent resistance against a wide range of environmental conditions. This unit operates on a standard 3ﾃ｢15 psi instrument signal (12 psi span-optional 24 psi}, and can provide years of trouble free service in many tough applications. The gauge block is cast into the unit and therefore standard. The large indicator has scaling to operate in both direct and reverse directions. Integrated Characteristic : Suitable for Linear/Rotary quarter turn actuator.Extremely vibration resistance design.Corrosion reisistance aluminum diecast and powder coated.Bolts on visual position indicator is adjustable and waterproof.Different type of spindles (Drive) and cams for wide range of application and actuators.Captive cover bolts. No worry to loose bolts while cover opens.Easy mounting.Optional position transmitter 4-20mA DC. Download
...more
704 FC Series Valve Positioner
We are one of the prominent Manufacturers, Suppliers and Exporters of 704 FC Series Valve Positioners that are used as final controlling element for operation of pneumatic Rotary/linear valve actuators in correspondence with an input signal of 4-20 mA DC or split ranges. 704 FC Series Valve Positioners can handle the supply pressure up to 100 psig for higher pressure industrial pneumatic and process control system requirements. 704 FC Series Valve Positioners are based on a force balance design for control application that requires a high degree of reliability and repeatability at an economical cost. Integrated Characteristics : Suitable for Rotary / Linear Actuators.Low Air Consumption.No resonance at 5~200Hz.Prevents hunting hy using Orifice for small size actuator.Simple Conversion to Direct Acting or Reverse Acting.Precise Calibration with simple SPAN and Zero Adjustments.Suitable for Single/Double acting Actuators.Can control ﾃつｽ split range with simple operation without replacing any parts.ExtremeIyr Vibration Resistance Design.Easy Maintenance.Corrosion -Resistance Aluminium Diecast Body.Options available :Position Transmitter ( 4-20mA VDC).Two limit switches. Download
...more
703 FC Series Valve Positioner
We are a prominent 703 FC Series Valve Positioner Manufacturer, Exporter, and Supplier in India. The 703 FC Series Valve Positioner can handle the supply pressure up to 100 psig for higher pressure industrial pneumatic and process control system requirements.703 FC Series Valve Positioner, we offer, is used as final controlling element for operation of pneumatic Rotary/linear valve actuators in correspondence with an input signal of 4-20 mA DC or split ranges. Our 703 FC Series Valve Positioners are based on a force balance design for control application that requires a high degree of reliability and repeatability at an economical cost. Integrated Characteristics : Suitable for Rotary / Linear Actuators.Low Air Consumption.No resonance at 5~200Hz.Prevents hunting hy using Orifice for small size actuator.Simple Conversion to Direct Acting or Reverse Acting.Precise Calibration with simple SPAN and Zero Adjustments.Suitable for Single/Double acting Actuators.Can control ﾃつｽ split range with simple operation without replacing any parts.ExtremeIyr Vibration Resistance Design.Easy Maintenance.Corrosion -Resistance Aluminium Diecast Body.Options available :Position Transmitter ( 4-20mA VDC).Two limit switches. Download
...more
700 FC Series Valve Positioner
700 FC Series Valve Positioners are used as final controlling element for operation of pneumatic Rotary/linear valve actuators in correspondence with an input signal of 4-20 mADc or split ranges. 700 FC Series Valve Positioners are based on a force balance design for control application that requires a high degree of reliability and repeatability at an economical cost. 700 FC Series Valve Positioner can handle the supply pressure up to 100 psig for higher pressure industrial pneumatic and process control system requirements. Integrated Characteristics : Suitable for Rotary / Linear Actuators.Low Air Consumption.No resonance at 5~200Hz.Prevents hunting hy using Orifice for small size actuator.Simple Conversion to Direct Acting or Reverse Acting.Precise Calibration with simple SPAN and Zero Adjustments.Suitable for Single/Double acting Actuators.Can control ﾃつｽ split range with simple operation without replacing any parts.ExtremeIyr Vibration Resistance Design.Easy Maintenance.Corrosion -Resistance Aluminium Diecast Body.Options available :Position Transmitter ( 4-20mA VDC).Two limit switches. Download
...more
500FC Series IP Transducers
Description The Flucon 5110 FC series transducers are ideally used to convert current or voltage input signal to a linearly proportional pneumatic output pressure. This versatile instrument is rugged and reliable force balance transducers for use in both process control and industrial applications, tor standard process control applications which typically utilize 3 to 15 psig output and industrial & high pressure application which typically utilize pressure output up to 120 psig. Flucon 500FC series transducers combines low cost, high accuracy and minimum air consumption with proven technology. Versatile design features and rugged, oorripact housing with a choice CMRI and ATEX* approved versions tor explosion proof or intrinsically sate operation when used with a suitable barrier. Principle of Operation The Flucon 5110 FC series transducer is a force balance device in which, when electrical current is passed through the coil of transducer, a magnetic 1ied is created which acts on the magnet assembly; casuirg die anvil Sl diaphragm to move away lrorn or forward the nozzle (flapper nozzle) depending on the direction of currentt low. Motion at the nozzle assembly is proportional to the amount of current passing through the coil. The flapper/anvil move away from or forward onwards the nozzle creates back pressure which acts as pilot pressure to an integral booster relay. when input electrical current increases lor decreases tor reverse actingl causes proportional output pressure increases. Iero and Span are calibrated by turning easily accessible adjusting screws on the font lace of the unit. The zero adjusting screw causes the nozzle to move relative to the flapper/anvil. The span adjusting screw is a potentiometer that limits die current through the coil. Thermistor circuit in series with the coil provides temperature compensation. Download
...more
400FC Series Limit Switch
400FC Series Limit Switch is an absolutely abrasion and corrosion resistant Switch. We manufacture, supply and export high grade 400FC Series Limit Switches. Our 400FC Series Limit Switch undergoes numerous quality tests before delivering it to customers. Integrated Characteristic : Suitable for Rotary Quarter Turn Actuator.Extremely Vibration Resistance Design.Corrosion Resistance Aluminum Diecast and Powder Coated Body, Dome of Poly Carbonate with Yellow/Red On/Off Indicator.Honeywell / Omron / Cherry / P & F make Switches.Dual Cable Entries - ﾃつｽﾃ｢ NPT and ﾃつｾﾃ｢ NPT for Easy Wiring.Dust Proof & Weather Proof IP 67 & IP 68 Enclosure/ Ex. proof. IIA, IIB, IIC.Captive Cover Bolts. No Worry to Loose Bolts While Cover Opens.Optional Position Transmitter 4~20 mADc. Download
...more
300FC Series Limit Switch
300FC Series Limit Switches are one of our most demanded products due to its high performance and quality. We are reputed manufacturers, exporters and suppliers of 300FC Series Limit Switches. We assure delivery of 300FC Series Limit Switches in stipulated time frame. We are firm believers of providing in best quality products to our customers at market leading prices. Integrated Characteristic : Suitable for Rotary Quarter Turn Actuator.Extremely Vibration Resistance Design.Corrosion Resistance Aluminum Diecast and Powder Coated Body, Dome of Poly Carbonate with Yellow/Red On/Off Indicator.Honeywell / Omron / Cherry / P & F make Switches.Dual Cable Entries - ﾃつｽﾃ｢ NPT for Easy Wiring.Dust Proof & Weather Proof IP 67 & IP 68 Enclosure.Captive Cover Bolts. No Worry To Loose Bolts While Cover Opens.Optional Position Transmitter 4-20 mADc Download
...more
valve automation services
Reviews & Ratings
Write a ReviewBe first to Rate
Rate ThisOpening Hours
Share your Correspondence Details to receive messages from Flucon Automation Inc.
