Linear Power Supply Dealers

The Linear Power Supplies offered by us are confidently used in the industries and household electrical purposes. The technology used in the mechanism of the Linear Dc Power Supplies is a highly sophisticated one. Besides being among the reliable manufacturers, we are placed among the internationally famous Linear Regulated Power Supplies Exporters from India.

• Output Voltage Range: 0 to 1000 V
• Accuracy: For Voltage : 0.5 % +/- 5 dgt

Our DC regulated power supplies are widely used in various industries and Educational Institutes. The output voltage produced by DC power supply ranges from 0 to 1000 V and output current ranges from 0 to 100 Amp. Power supply are provided with Digital Panel Meters for voltage and current . They are provided overload and short circuit protections.

 EN204L is 4 CH Regulated Linear Power Supply* EN204S is 4 CH SMPS Power Supply* Output voltage 12V DC more than 2Amp* Short circuit protection. High Grade Glass Epoxy PCB* Power LED Indication with On/Off Control* Individually Camera Wise Terminal to avoid the messy wiring* MS Power Coated White Matt Finish EnclosureEN204S(SMPS POWER SUPPLY)* Wide Input 90 ~ 300VAC Voltage Range Support* Overload Cut Off Protection  

SPECIFICATION FOR 0-16V/0-6A LINEAR REGULATED DC POWER SUPPLY 1. Input : 230V +10%, 50Hz, Single Phase 2. Output Voltage : 0-16V DC Settable Continuously with two potentiometers provided on Front Panel clearly marked with coarse and fine voltage control 3. Output Current : 0-6A Max 4. Regulation : (Line) CV :

• Brand Name: SELEC
• Application: Industrial PCs, Bio-medical Instrumentation, Testing Equipments, Analytical Instrumentation

An Open Frame Power supply series which is available in standard industry sizes and Power.Comes with Fan output,Thermal Shutdown feature & Remote Inhibit.

• Output Voltage :: 110VDC Fixed.
• Voltage Adjustment :: Fine control.
• Output Current :: 0 to 10 Amps

We offer Linear regulated fixed power supply with following specifications: Model No. : PGD-PS-11010A Input Voltage : 230 VAC +-10% 50Hz. Single phase AC. Output Voltage : 110VDC Fixed. Voltage Adjustment : Fine control. Output Current : 0 to 10 Amps Current Adjustment : Fine controls. Output Line regulation : +- 0.1% +-3mV Output Load regulation : +-0.1% +-3mV Control scheme : Transistor series pass regulator. Ripple : 10mV RMS Display : 2 individual 3 digit DPMs for Voltage and Current. Indication ( LED ) : Over load, Short circuit, Power on. Power On : MCB Protection : Transistor series pass regulator. Operating temperature : 5 DEG C to +60 DEG C Output Adjustments : With Knobs. Dimensions : 200mm(H) X 482mm(L) X 350mm(D) Other custom make specifications available on request.

Rigol DP832A Rigol 832 Rigol 831A:3 Outputs, CH1 || CH2,CH3,Total Power up to 195W Rigol DP811A:40V5A or 20V10A,Single Channel,Dual Range with Remote Sense Rigol DP821A:60V1A || 8V10A,,Dual Channel with Remote Sense Low Ripple Noise:

• Frequency: 60 Hz doubled to 120 Hz

A simple AC powered linear power supply usually uses a transformer to convert the voltage from the wall outlet (mains) to a different, usually a lower voltage. If it is used to produce DC a rectifier circuit is employed either as a single chip, an array of diodes sometimes called a diode bridge or Bridge Rectifier, both for fullwave rectification or a single diode yielding a half wave (pulsating) output. More elaborate configurations rectify the AC voltage at first to pulsating DC. Then a capacitor smooths out part of the pulses giving a type of DC voltage. The smaller pulses remaining are known as ripple. Because of a fullwave rectification they occur at twice the mains frequency (in USA it's 60 Hz doubled to 120 Hz). Finally, depending on the requirements of the load, a linear regulator may be used to reduce the ripple sometimes also allowing for adjustment of the output to the desired but a lower voltage. More elaborate versions used by circuit designers are adjustable up to 30 volts and up to 5 amperes output. These often employ current limiting. Some can be driven by an external signal, for example, for applications requiring a pulsed output. In the simplest case a single diode is connected directly to the mains and uses a resistor in series with a more or less fixed load to recharge a battery. This circuit is common in rechargeable flashlights. Selectable 110/240VAC Linear regulated Clean output with less than 2mV ripple Output adjustable from 5 to 25V Two chassis formats available

• Frequency: 47 to 63Hz
• Voltage: 230V rms
• Operating Temperature: 0 to 55C
• Degree of Protection: IP20

• MODEL: DESCRIPTION
• SFL 012002T: �12V / 2A
• SFL 012004T: �12V / 4A
• SFL 012006T: �12V / 6A
• SFL 012008T: �12V / 8A
• SFL 012010T: �12V / 10A
• SFL 012015T: �12V / 15A
• SFL 012020T: �12V / 20A
• SFL 012002T: �12V / 2A
• SFL 012004T: �12V / 4A
• SFL 012006T: �12V / 6A
• SFL 012008T: �12V / 8A
• SFL 012010T: �12V / 10A
• SFL012015T: �12V / 15A
• SFL 012020T: �12V / 20A

• Unique Features:: 1.Adjustable DC voltage levels 2.Smooth Rectified voltage; with filtered ripple. 3.Controls the output voltage level to a constant value irrespective of line, load and temperature changes.
• Specification:: Auxiliary Supply: 230v AC ± 10% 50-60 Hz Output voltage 1.25 V – 30 V Charging current: 1.5A – 10 A

This is an intelligent power supply which is smartly designed with LINEAR technology. This power supply monitors and delivers constant voltage and determines the optimum current at that given instant of time depending on the connected load conditions.

This is an intelligent power supply which is smartly designed with LINEAR technology. This power supply monitors and delivers constant voltage and determines the optimum current at that given instant of time depending on the connected load conditions. Unique Features:1.Adjustable DC voltage levels2.Smooth Rectified voltage; with filtered ripple.3.Controls the output voltage level to a constant value irrespective of line, load and temperature changes.4.Output and Inputs voltages are electrically isolated.5.Output is surge protected.6.working Temp. 0-125°c.7.Thermal Shut-down8.Auto Re-start   Specification: Auxiliary Supply: 230v AC ± 10% 50-60 Hz   Output voltage 1.25 V – 30 VCharging current: 1.5A – 10 A

Linear Power Supplies, Wall washers, Led Street Lights, Led Drivers

Linear Power Supplies, SMPS, dc dc converters, power supply system

Linear Regulated Power Supplies (CV / CC)

Linear Power Supplies, dc brushless fans, modbus repeater

linear based power supplies, SMPS, Mobile Chargers, Voltage Stabilizers

Linear Power Supplies, power supply devices, redundant power supplies