Mangalam Alloys Limited Chhatral, Gandhinagar, Gujarat

Standard : DIN 938, DIN 939, DIN 975, DIN 976, DIN 2509

Mangalam Alloys produces Austenitic, Martensitic, Ferritic, Free Machining Stainless steels, Hot Work Tool Steels in the form of Flats and Straight Length Black and Bright round bars.  in the form of Flats and Straight Les steels, Hot Work Tool Steels in the form of Flats and Straight Length Black and Bright round bars. ound bars.  

Type : Cold Drawn & Polished

Length : 3/4/6 meter (12/14/20 feet)

T – Headed bolts (As per customer specification) Anchor bolt assembly for marine fender Resin anchor for marine fander Foundation bolts of stainless steel for marine construction Hollow sleeve (As per customer specification) U hooks for marine fenders & marine construction

Type : Cold Drawn & Polished

Length : 3/4/6 meter (12/14/20 feet)

Grade : DIN 933, DIN 931

Condition : Hot Rolled Pickled Annealed Straightened

A2 ( AISI 304 / AISI 304L ) / 1.4301 / 1.4306 / ASTM A193 B8 Cl.1 & Cl.2 / ASTM A320 B8 Cl.1 & Cl.2 / A2-50 / A2-70 / A2-80 A4 ( AISI 316 / AISI 316L ) / 1.4401 / 1.4404 / ASTM A193 B8M Cl.1 & Cl.2 / ASTM A320 B8M Cl.1 & Cl.2 / A4-50 / A4-70 / A4-80 Stainless Steel “BS 1449” Grades 316S31 & 316S33 AISI 410 / 1.4006 / ASTM A193 B6 Duplex Steel UNS S31803 / 1.4462 / 1.4410 Alloy 2205 / F51 / F53

Grade : Stainless Steel/Duplex/Super Duplex

Various grade of forged round bars are from bottom poured forging quality Ingots. As high quality ingots is a input material for steam hammer. Quality forged round bars result into higher quality of forged round bar by proper monitoring controlled of temperature during and after forging together with sufficient enough reduction ratio. This ensures proper micro structure and internal soundness of forged round bars. They are then heat treated like solution annealing oil hardening and temperature soft annealing normalizing as applicable to achieve desired physical and mechanical properties of forged round bar can be proof machine up to + / – 0.5 mm tolerance.      

Length : 2.5 Meter to 5 Meter

Mangalam Alloys produces Austenitic, Martensitic, Ferritic, Free Machining Stainless steels, Hot Work Tool Steels in the form of Flats and Straight Length Black and Bright round bars.   Fully ground ingots are used as input materials in walking beam type furnace to feed in 16″ 3-high rolling mill. Proper hot working temperature and controlled on finished pass & finish temperature. Ensure uniform surface quality, dimension and micro structure through off rolled black round bars. Online inspection end cutting required length. Ensure quality of black round bars as per customer requirement .Round bar can be heat treated as soft annealing, solution annealing, hardening tempering,precipitation hardening, edging, and normalizing, process annealing as may be required.  

Length : 3.0 to 7.5 Meters

Condition : Hot Rolled Pickled Annealed Straightened

Quality of ingots meet highest quality standard and all hot working application. Ingots are sound with respect to surface quality, internal quality and chemical composition. They can be cast into various length as desirable. The entire ingots meet straighten chemical composition standard meeting national and international quality requirement.

Size : 3″x4 “, 6"

Grade : DIN 7991