Masibus Automation And Instrumentation Pvt. Ltd. Gandhinagar, Gujarat

Wireless Humidity & Temperature Transmitter Model HT16W is state of the art wireless Humidity Temperature Transmitter to measure, display and transmit Relative Humidity and Temperature with high accuracy. The data is streamed wirelessly over Zigbee network at set intervals. Even if the user wishes to push the data in between of set intervals, it can be done by pressing the front key. The unit has low power consumption, operates on 2 x AA Lithium cells and is housed in an elegant wall mount enclosure. At the heart of the Transmitter is the built-in RH & Temperature sensor chip, highly accurate with excellent long term stability, the measurements are displayed on a custom built LCD display with engineering units and 0.1 resolution, besides the real time values the unit also captures and displays statistical Min and Max values.The custom built display of HT16W indicates the RH and Temperature values along with Battery status & wireless signal strength. The Data transmission is based on ZigBee protocol, the preferred protocol for low power devices, and the transmission frequency is on the license free 2.4GHz ISM band, the transmission range is 90 meters typically without line of sight, the data is pushed by the individual Transmitters to the loggerPC at set interval. RoutersRepeaters can be used to increase the network range.

Masibus Wireless Synchronized Digital Clock, Master Clock MC-2 and Slave Clock DDU-2444 is a perfect solution for a wide range of applications where accurate, synchronized time is required. It displays parameters like Time and Date. Wireless Synchronized Digital Clock eliminates wiring and reduces installation cost and also allows a retrofitting of an existing installation in a convenient way. Each clock can work as Slave cum repeater that helps to extend the network range. The Wireless system allows multiple Slave clocks to work on samemultiple frequency range and can retransmit without interfering with other wireless products. Frequency hopping technology is available for error free communication in case of interference from some wireless device on some particular communication frequency. Wireless Synchronized Digital Clock System also has two more options of wired RS232 or RS485 Connection other than RF wireless connection to sync with GPS Master Clock. MC-2 and DDU-2444 works on Time protocols like (NGTS, NMEA and TFormats) for wired Connection. The DDU-2444 has built-in Battery backed RTC which maintains time in case of loss of power and communication break. DDU-24 Slave Clock is specially designed with SS faceplates, Modular wall mounting compatible for Pharma & Clean room requirement. The rugged Mild Steel case with front soft steel makes DDU-2444 ideal for demanding industrial environments and elegant look. Flush LED display of DDU-2444 offers a wide angle viewing. DDU-2444 are available in Flush Mount, Panel Mount & Wall mount versions.

n IR Pyrometers Silver Series Single Wavelength � Silver Series Sensors Williamson IR Pyrometers Silver Series The Silver Series is a family of compact industrial infrared thermometers. They are recommended for applications that typically involve: target temperatures below 1000°F550°C non-reflective target materials moving targets a need for a small sensor size high reliability and performance The Silver Series contains the latest advances in digital processing to provide the most accurate, repeatable, and reliable measurements for this type of sensor. With a choice of sensor configurations and outputs, they are easy to install and maintain.

ter PRO Series � Single wavelength Single Wavelength Pro 4050 Class Sensors Williamson IR Pyrometer PRO Series - Single wavelength The PRO 4050 Series offers a complete family of single-wavelength infrared thermometers featuring state-of-the-art technology to provide accurate and reliable measurements for a wide range of industrial applications. PRO 4050 Series sensors feature a variety of input, output, and alarm options to enable advanced process monitoring and control capabilities. Each sensor can be configured to operate as a stand-alone sensor or with a remote Interface Module using the sensor�s six conductor interconnecting cable.

Williamson IR Pyrometer PRO Series features state of the art technology to provide accurate and reliable measurements for traditional and challenging applications. Features Unique Multi wavelengthDual wavelength model with application specific ESP algorithm Automatic emissivity compensation Measures emissivity & signal dilution apart from object temperature Views through dust & dirty optics Advanced emissivity compensation techniques, ESP Rugged, corrosion-resistant IP65 enclosure Long term calibration stability

Rometer Gold Series Single Wavelength � Gold Series 2030 Class Sensors Williamson IR Pyrometer Gold Series The Gold Series of Williamson IR offers a complete line of single wavelength infrared thermometers featuring state of the art technology to provide accurate, reliable measurements for a range of general industrial applications.

Features Portable and ready-to-operate Measuring Vibrations, Speed, Temperature and Belt Tension Measurement range- Vibration velocity: 0 to 999.9 ms Rolling bearing condition: 0 to 999.9 gSP Speed: 30 – 200,000 1min 0,5 – 3,333 Hz Temperature:0 to 200 °C Frequency range – Vibration velocity: 1-1,00010-1,00010-10,000 Hz Rolling bearing condition: 5 to 50 kHz Belt frequency: 10 to 1,000 Hz Measuring temperature (Option) Check of belt tension (Option) Applications Checking machine vibrations Identification of critical operational areas Evaluation of the condition of rolling bearings Used for Checking rotational speed Early detection of failures

Features Vibration Analysis, Machine Diagnostics, Field Balancing Very large, colour LCD Analyzing frequencies of a vibration (FFT) Evaluating resonance frequencies and transfer functions Frequency range: 1 Hz – 5,000 Hz Speed range: 60 – 300,000 rpm Display range: 0.001 – 100,000 Observing and recording vibration data Detecting machine damage Balancing in one or two planes Tracking, Envelope Analysis PC Software

Masibus VM908 vibration meter is a basic portable vibration measurement product that reads vibration in various modes. It provides essential periodic monitoring of fan, pump, motor and other industrial machines. It measures the vibration to which it is exposed. Masibus has a proven track record of manufacturing portable instruments and online process monitoring instruments for over 3 decades. Vibration meter makes cost-effective off line vibration monitoring instrument with various important parameter i.e. displacement, velocity, acceleration. Vibration meter is a strategic tool for predictive maintenance. It measures off line vibration and provides easy evaluation of health of machines. On this basis further analysis can be done using vibration analyzer for diagnosing the machine problem. Vibration is measured in terms of r.m.s. and peak. When overall vibration is to be measured, r.m.s. and peak measurement technique is considered best for general machine health. VM908 is very handy easy to use device for any maintenance crew. It gives very easy understanding of equipment health and guides for repairs. It is also good tool to check out if repair has improved health of machine. Maintenance team can be confident about repair work done by ensuring that vibration reading post repair has gone down and machine is healthy. Features Backbone of Predictive maintenance Essentials for Good Maintenance Necessary Instrument for Tool Box Basic vibration measurement Measurement of overall vibration level in rotating machines

Features accurate measurements for 4 selectable frequency ranges real-time measurement of the total vibration level and the bearing condition (bc), shown simultaneously the largest amplitude peak frequency in rpm or hz in main screen display measurement units and measurement presentation may be selected by the user from the following list: g-value = (rms, peak or peak-peak) a = ms² (rms, peak or peak-peak) v = mmsec (rms, peak or peak-peak) v = inchsec (rms, peak or peak-peak) d = mills (rms, peak or peak-peak) d = µm (rms, peak or peak-peak) bearing condition measurements bar indicator shows measurement stability large dynamic range of the vibration signal (up to 50 g) low power consumption clear vibration, temperature and danger alarms by red and yellow color led’s easy to understand and operate advanced technology with dsp processor display with backlight several languages are available adjustable auto-shut off for energy saving dust and waterproof for rough use (ip65).

VIBER X1™ vibration meter is an analog vibration measuring instrument for control and measurement of the mechanical vibration and bearing condition. A flexible instrument that fits in every maintenance engineer’s pocket. VIBER X1™ vibration meter is a complete analog instrument Dense built-in charger, selectable frequency ranges and interchangeable accelerometer (BNC connector), And just as easy and reliable as its predecessor. Measure very accurate right down to the 2Hz. with the push of a button is changed frequency range (2Hz-1000 Hz, 10-1000 Hz, 2Hz-givarmax, 10 Hz-givarmax). Interchangeable accelerometer and cable provides economy and safety because it can easily be replace if something breaks and that you do not need to be close to rotating parts. Clear LED indication displays the frequency range that is selected. Charger, manual, accelerometer with 1 m cable and flat magnet and soft bag with shoulder strap and belt clip included Features Total level (mms RMS) and bearing condition Easy to use, start and measure Dust-and waterproof, for use under tough conditions (IP 65) Interchangeable accelerometer with cable Selectable frequency ranges Analog instruments with high measurement accuracy and reliability

Features Possible to test most accelerometers, velocity transducers and proximity probes. Measures the transducer signal and reliability Can be used mobile in a plant, with only line voltage. Vibrograph© software is virtual instrument, communication through USB. The amplifier is controlled by Vibrograph©. A calibration certificate with response plot can be generated automatically. Delivered in a bag, complete with vibrator, reference transducer, amplifier and software. Benefits Increase reliability in measurements and analysis Routine calibration of sensors and associated instrumentation is recommended to improve confidence in measurement accuracy and acquired data. Application This equipment makes it easy to support customers with an additional and profitable service

Analysis and Route instrument with transfer to X-Trend PC-software trough USB Features X-Viber is a low-cost route data collector Route measurements via X-Trend PC software Total Vibration level Bearing Condition Value FFT analysis Envelope analysis Speed Measurements Temperature measurements Benefits Selectable Measuring unit, Frequency range Options of Data Logging Single plane balancing with the 3-point method Single plane balancing with the vector method Amplitude and phase measurements Higher availability, low power consumption, avoids catastrophic failure.

Features Unbeatable price VS performance ratio Coast- down/- up, Orbit analysis, bearing condition, Amplitude and Phase, Envelope, Spectra Data logger for long-term recording Route based data collection No additional software upgrade cost, No annual service fee Roughed and tight (IP65)

AUX Powered Temperature Transmitter UT-94 is a 4 wire versatile universal transmitter that isolates & converts wide range of conventional unconventional process inputs into standard process signals acceptable to commercially off the shelf (COTS) automation products. Signal inverting option is also available. The input circuit can accommodate a variety of input signal levels including bi-directional, reverse, true and live-zero. A built in 4 digit display facilitates the user to monitor process value and helps in fast configuration and calibration. Model UT-94 enables analog signals to transmit without galvanic connections between the fields to the receiving instrument. This in turn allows ground or reference levels to float up to thousands of volts at its input terminals, and prevents circulating current between differing ground potentials that can contaminate input signal. Isolation provided by AUX Powered Temperature Transmitter UT-94 saves the control system from damage due to accidental application of high voltage or induced voltages on the input signal and in turn avoids wrong output signals to process. Isolation provides a good protection for sensitive system parts against voltage spikes etc. AUX Powered Temperature Transmitter UT-94 offers a wide range of input output signal types include mA, mV, V, RTD, TC, Resistance. Built-in transmitter power supply (TPS) can drive field transmitters in case of 4-20mA DC input. It offers excellent accuracy and stability for reliable operation in hostile environments and full isolation safely separates each input channel, each output channel and the power supply. AUX Powered Temperature Transmitter UT-94 is equipped with advanced functions like digital filtering, password setting, input and output protection and square root function for optimum process functionality.

The hermetic sealed triaxial industrial piezoelectric accelerometer model 131 is design to monitor the vibration in harsh industrial environment. Triaxial accelerometer uses the industry standard ®icp 2-wire voltage transmission technique with a 2 ma minimum constant current supply. Signal ground is isolated from the mounting surface and outer case to prevent ground loops. Faraday shielding will limit sensitivity to esd to a minimum. Annular shear mode design will prevent from thermal transient and from spurious signal from high transverse vibrations. Low noise electronic and a temperature compensated design will give you accurate result over the complete temperature range. Large choice of frequency range will help to fit almost every customer requirements. Low frequency accelerometers (a=9x, 0x) incorporate a low-pass filter within the conditioning electronics. This filter attenuate the sensor mechanical resonance and the associated distortion and overload. Triaxial accelerometer is used for vibrations measurement in the rugged environments of industrial machinery monitoring. Used for vibrations measurement in the rugged environments of industrial machinery monitoring. ®icp transmission mode annular shear mode (better than obsolete compression design) dual case isolation with internal faraday shield (suitable for permanent installation, no need for insulation pad, no ground loop) low, medium and high frequency version (10, 50, 100, 500, 1000 mvg) hermetically sealed (laser welded)

Masibus TDR-4 Time Distribution Rack amplifies input signal which is connected on rear side and distributes via different timing outputs. Time Distribution Rack (TDR-4) accepts signals like 1PPS, IRIG-B TTL, IRIG-B Modulated, NMEA (RS232) and Event from GPS and gives four isolated outputs of each signal same as input. Time Signal Splitter TDR-4 is housed in a compact 19��, 3U rack mounted package. It has nine output card slots and one power supply card slot. Each output card has 4 outputs thus maximum 36 outputs of different or same type possible in single TDR-4 Time Signal Splitter TDR-4 has High Intensity LEDs on each card to shows the power status of the card and four numbers of isolated outputs signal status. All the inputs are connected on the rear side & all the output signals are on the front of the equipment. Time Signal Splitter TDR-4 has flexibility to choose from six different output cards 1PPS, IRIG-B TTL, RS232, RS485, IRIG-B Modulated, NTP and Event. Any signal output card can easily be inserted into any signal card slot excluding Power Supply Slot. If user requires more than four numbers of outputs then user has to insert another same type of the card in any slot of the TDR-4. Time Signal Splitter TDR-4 has also facility to interface redundant GPS incase of any failure occur with the first GPS. Features of Time Signal Splitter Timing Signals accepted from GPS: 1PPS IRIG-B Modulated IRIG-B TTL NMEA (RS232) Event

Masibus TT7S00-HR – 2-wire Transmitter Pt-100 input. Loop Powered Temperature Transmitter TT7S00-HR is low cost Analog Linearized non-isolated 2-wire Head mount Transmitter. Solder pads selection and potentiometer adjustments makes the Transmitter suitable for multi-range applications; the electronics is rated to withstand high temperature, protected by potting and housed in a rugged enclosure for reliability. The Loop Powered Temperature Transmitter is sized for DIN B sensor heads with ergonomically placed terminals and potentiometers for ease of wiring and adjustments, the output is fully linear to temperature and load independent, with just 6.5V drop across the output, large loads can be connected in the loop. For sensor break the unit can be configured for upscale or down scale output, sensor lead wires are compensated for up to 15 ohms per lead in 3W connection. Loop Powered Temperature Transmitter TT7S00-HR is the most cost effective transmitter for Pt-100 input where Isolation between Input and Output is not required, the electronics is optimized to give the best performance at a very low cost, the PCBs are machine soldered for utmost reliability, every unit undergoes a stringent quality and calibration check and supplied with a test report each. Masibus has 39 years of design experience and is known for delivering quality Instrumentation products cost effectively. Features of Loop Powered Temperature Transmitter Multi-Range design Output Linear to Temperature Analog Linearized for 0.1% Linearity Sized for DIN B heads and bigger Sensor break selection for upscale or downscale

Loop Powered Temperature Transmitter TT7S series are designed for Isolated and accurate temperature measurements and signal conditioning Applications. Loop Powered Temperature Transmitter Model TT7S10 is 2-wire Loop powered; Model TT7S11 is 4-wire Auxiliary powered and Model TT7S10-H is Head mount version of TT7S10. All models are programmable for Thermocouples, Pt-100 RTD, mV and ResistancePotentiometer. Output signal is standard 4-20mA in 2-wire and mA or Volts in 4-wire. Programming of the Transmitters is easy by means of user friendlymTRANwindows based configuration software. Loop Powered Temperature Transmitter TT7S Series are built using the latest Technology to deliver high performance in Accuracy, Resolution, Stability and Isolation. ZeroSpan adjustments, sensor break detectionprotection, Reverse output and Reverse Polarity protection are standard features across all models. Software techniques like polynomial Linearization and digital filtering gives Linearized and stable output in harsh industrial conditions, High level of isolation between Input and output prevents ground loop errors and protects costly measurement and control systems under fault conditions. mTRAN a windows based Software is used for configuring, calibration and monitoring the Loop Powered Temperature Transmitter TT7S. Features of Loop Powered Temperature Transmitter Universal input (RTD, thermocouple, Ohm, mV) 1.5 KV RMS Isolation between Input & Output Linearized Output Highly Accurate Fully Programmable for Input type & Range Fast Response time:

Loop Powered 4-20mA Transmitter ET7S21 ET7S22 are Single Dual channel Input Loop powered Isolators used for Electrical Isolation of 4�20mA signal, Electrical Isolation eliminates common mode voltages, prevents ground loops measurement errors and protects expensive systems from field faults. The model is Loop powered by 4-20mA and does not need auxiliary supply, thus saves wiring cost and power dissipation. High reliability of Loop Powered Transmitter ensures system uptime and low maintenance costs. Loop Powered 4-20mA Transmitter ET7S21 ET7S22 is well suited for 4 wire transmitters and Aux. output signals from Automation Systems and Devices like AC drives, Analytical Instruments, PLC, etc. Features of Loop Powered 4-20mA Transmitter Available in Single and Dual channel option Two port isolation- between input and output High accuracy Isolation level-3KV DC Low power consumption on Input Loop High frequency response Extremely low temperature coefficient (35 PPM°C) High reliability (MTBF >500,000 hours) Applications of Loop Powered 4-20mA Transmitter Field Interface Isolation of field signals Factory automation VFD automation SCADA

Masibus 5006RN is the most accurate and reliable OnOff Controller for various process applications with enhanced hardware capabilities in compact enclosure. Masibus Series of OnOff Controllers are available in various options having display size of bright seven-segment 0.56� LED display for process value. It accepts universal input and provides two relay outputs to perform various control and alarm functions. Intuitive configurations with four front tactile keys ensure easy programming. Process value can also be re-transmitted to remote devices as standard currentvoltage signals. Data acquisition can be done on SCADAPLC applications through RS485 for further process automation. Designed using proven micro-controller technology, these controllers have been validated to perform accurate and reliable performance in harsh field environments. Features Universal input (TC, RTD, Volts, mA) Fail-safe Design protecting the process in case of system malfunctioning Bright Red seven segment LED Display Display brightness control Status Indication LEDs Relay Output Re-transmission output (optional) RS485 Modbus Communication (optional) Transmitter Power Supply

Masibus signal isolator is a rugged 4 wire isolator available in compact DIN rail mounting enclosure designed to accept custom built and wide range of voltage and current input signals. Signal is isolated and converted to standard instrumentation signals compatible to commercially off the shelf (COTS) automation products. 9000U is available in two models, SingleDual output and ThreeFour output. Masibus’ Signal Isolator Model 9000U provides galvanic isolation between field signals and receiving instrument, this in turn rejects any common mode voltage at field side and prevents ground loop problems. The isolator also protects expensive systems from high voltage faults on the field side. With multiple outputs this model also acts as signal distributors. A typical application could be where the signal has to be distributed for indication on local panel, field control room, main control room and DCS system. 9000U is compatible with both 2 wire and 4 wire transmitters and has built-in transmitter power supply to power 2 Wire field transmitters. Model 9000U signal isolator offers a wide range of input output signal types which includes mA, mV, VDC. Model 9000U offers excellent accuracy and stability for reliable operation in hostile environments and offers full 3 port isolation between input, output and power supply. Each channel zero and span calibration is adjustable by multi-turn potentiometers; the unit can accept a wide range of Aux. power from 90 to 265V AC or 18 to 36V DC. Model 9000U is designed for easy customization and can be customized to signals levels from mV to Volts both at input and output side. Features of Signal Isolator Rugged & accurate 4 wire isolator Three port isolation Universal AC DC Aux. supply Upto 4 outputs of different types available Wide zero & span adjustment limits

Slim signal isolator 9000c is slim yet rugged 4 wire isolator used for reliable isolation and attenuation of industry standard field signals. 9000c is available in single or dual output models. Slim signal isolator 9000c has higher noise rejection ratio that ensures accurate and noise free signal conditioning. Its slim din rail mount design occupies less space and reduces cost of overall installation. With dual output option this model also acts as signal distributor. A typical application could be where the signal has to be distributed for indication on local panel, field control room, main control room or dcs system. The isolator provides a good protection for sensitive system parts against voltage spikes etc. Slim signal isolator 9000c offers a wide range of input output signal types which includes ma, mv, vdc which are factory settable as per user requirements. It has built-in transmitter power supply (tps) to drive field transmitters delivering 04-20 ma dc outputs signal. An exceptional feature of advanced extended universal power supply for the range of 20v to 265v dc or ac makes 9000c suitable for most of power supply range available in field thus providing easy installation. Slim signal isolator 9000c model offers excellent accuracy and stability for reliable operation in hostile environments and full isolation safely separates input channel, each output channel and the power supply. Features of slim signal isolator slim design of 12.5mm for single output and 17.5mm for dual output rugged & accurate 4 wire isolator compact din rail mounting extended universal power supply range: 20v to 265v dc or ac 1.5kvac three port isolation

409-s rpm indicator is for measuring the rotating speed of a turbine or other rotating machines; it accepts input signal from proximity sensortransducer based on eddy current principle, it can also accept input signal from other type of proximity sensors, photoelectric sensors, limit switches and rotary encoders, the unit has a isolated built-in 24v dc excitation supply to power the input sensors. 409-s rpm indicator comes with 2 set points and relay outputs for alarm and trip purpose, the set points and relay logic can be user set for over speedunder speed alarming and protection, the unit has built-in acknowledge logic for maintained as well as momentary alarms, the relays can be configured for normal or fail-safe operation. Isolated analog output by way of currentvoltage is available for interface with plcdcs systems, also isolated rs485 modbus rtu port is provided to incorporate the 409-s in a plant wide scadasystem. 409-s rpm indicator is compact, reliable and fit for most critical speed monitoring and protection, the unit can be programmed for number of eventsrotation and displays the speed from 1 rpm to 10000 rpm on a bright 5 digit display the brightness of which is adjustable to suit any environment. Features of rpm indicator monitors, protects & transmits turbine & rotating machines speed bright 5 digit display with brightness control programmable events per rotation 2 set point with relay output for alarmtrip analog output for plcdcs interface modbus rtu output on rs485 for scada