Pharmaceutical Processing Equipment Dealers in Gandhinagar

Our Dedusting Machine is uniquely designed to cater the requirements of various industrial applications especially the plastic recycling industry. To ensure good products from the recycled material, you have to remove the chips, dust, or powder generated in the process of grinding of recycled rejected articles of injection molding, plastic scrap, runners and spruces generated in injection molding. It is also used to remove the dust from the floor sweepings of plastic granules factory. Our Vibro Dedusting Machine reduces the chip/dust from this material thus reducing the quality rejection from molded articles. The Ground plastic material is fed in the centre of our Vibro Screen and the same is separated in two parts/outputs by vibratory motion giving product on one side and dust/chips/powder material on the other side continuously. We are recognized as one of the prominent supplier Deduster Machine to Machinery Manufacturers in India. Applications Scrap recycling, plastic granules sweepings, injection molding scrap, spruces & runners from grinder/ grinding, etc.Removes Dust or Chips from plastic scrap grindingReduces rejection after molding In addition to the basic Screening Machine, we provide following options in our range of machines as per the requirements of the clients. Machines Ranging from 2 Feet to 6 feet DiaAnti Choking/Anti Clogging AttachmentMS/ SS 304/ SS 316 Contact partsMachine with or Without Top CoverInternational Brand Motor

This vibrating energy screen is unit consisting of circular pretension screen mounted on the frame along with vibrating motor. The vibrating motor imparts three plane vibrations to the screen due to revolving eccentric weights. Total assembly is mounted on suitable springs so that it becomes a independent body which vibrates without parting any vibrations to the foundations.  SPECIAL FEATURES:- • High capacity & optimum use of space. • Process adaptability. • Low operating and maintenance cost. • Long screen life. • Easy for assembly & dis-assembly for cleaning & change over of screens. • Springs amplify the vibrations leading to reduced motor HP, maintenance & operational cost. • Compact unit for easy of operations. • Available in two, three & four deck also.  OPTIONAL:- • Contact parts are made out of SS316 quality material instead of SS304. • Single Deck / Double Deck / Three Decks.  RECOMMENDED:- • Wide range of seaves available in sizes from 4 meshes to 150 meshes.

Operation : The Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts made out of stainless steel of required grade by customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.   Salient Features : The conical shape at both ends enables uniform mixing and easy discharge.  All contact parts are made out of stainless 304 or 316 quality material, as required by customer.  Maximum care has been taken to ensure safe operation of the unit.  Manual rotating facility with hand wheel for inching. The same will be provided with ss cover & limit switch. ( In 200 Kgs. & above model )  Two nos. of safety road will be provided at back side. ( One LH side & one RH side )  Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning.  One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone.  Cone will be mirror polished from the inside & outside & structure will be matt polished.  All moving parts covered with SS304 covers.  Safety guards made from SS304 pipes provided in front of the m/c with limit switch.  Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter.  As per customer requirement machine will be provided with left side drive or with right side drive.  The conical shape at both ends enables uniform mixing and easy discharge.  All contact parts are made out of SS304/316(as per customer requirement) quality material.  Maximum care has been taken to ensure safe operation of the unit.  Worm reduction gear use for speed reduction.  Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.  Inside & outside of the cone will be polished to the mirror finished.  General structure made out of SS304 and Polished to the matt / mirror finish ( as required by you ) in GMP Model.  All safety guards & covers made out of SS304 in GMP Model. Hand wheel will be provided for manual tilting of cone.  Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.

Double cone blender are specially useful for mixing small portion of one product with larger portion of other products. These blender are made out of stainless steel welding is done by argon arc process suitably ground and polished. The volumetric capacity is about 4 times the mixing capacity. To effectively achieve efficient mixing, the product should not be filled to more than half.

This vibrating energy screen is unit consisting of circular pretensioned screen mounted on the frame along with vibrating motor. The vibrating motor imparts three plane vibrations to the screen due to revolving eccentric weights. Total assembly is mounted on suitable springs so that it becomes a independent body which vibrates without parting any vibrations to the foundations.   Special Features : High capacity & optimum use of space.  Process adaptability.  Low operating and maintenance cost.  Long screen life.  Easy for assembly & dis assembly for cleaning & change over of screens.  Springs amplify the vibrations leading to reduced motor HP, maintenance & operational cost.  Compact unit for easy of operations.  Available in two, three & four deck also. Technical Specification : Model : 24" / 30" / 40"  Drive Motor : 0.5 / 0.75 / 1.0 HP.  Screen diameter : 600 / 750 / 990 mm ( approx.)  All contact parts are made out of SS304 quality material. ( SS316 Optional )  D.O.L. starter provided with the unit.  Out put : 24" : up to 150 Kgs./ Hr.                30" : up to 200 Kgs./ Hr.                40" : up to 300 Kgs./ Hr. ( Depending upon the material properties and the screen size )  Optional : Contact parts are made out of SS316 quality material instead of SS304.  Single Deck / Double Deck / Three Deck.  Recommended : Wide range of seaves available in sizes from 4 mesh to 150 mesh.

We are offering double cone blender. The double cone blender is an important machine for mixing dry powder in the pharmaceutical industry, chemical industry, food industry and cosmetic industry. For proper mixing of dry powder, you have to fill two third volumes of the machine. We manufactured double cone blender machine using high quality stainless steel having ss 304 and ss 316 quality material. Following are some of the features of double cone blender: silent features: • the conical shape of the machine helps to mix a powder and in discharge of the machine. • maximum care has been taken to ensure safe operation of the unit. • you can rotate manually with hand wheel • the inside and outside body of the cone is well furnished and matt polished • all moving parts covered with ss304 covers. • safety guards are provided. J k industries – the leading manufacturer and supplier of double cone blender located in kalol, gujarat.

Pharmaceutical Metal Detectors, tilting device, Depyrogenation Tunnels

roll bandage machinery, gauge machinery, crepe bandage machinery

Pharmaceutical Equipment, Pharmaceutical Machinery, Pharma Machinery

Pharmaceutical Equipment, Steam Sterilizer, Autoclave, pure steam generator

Double Cone Blender, Sparkler Filter, Chemical Machinery