Single PCB Dealers in Sector 25, Gandhinagar

• Brand Name: Customized
• Base Material: FR-4, Glass Epoxy
• Board Thickness: 1.60
• Copper Thickness: 35
• Min. Line Width: 0.35
• Place of Origin: Gandhinagar

Single Sided Printed Circuit Boards are the regular type of circuit boards that make use of substrate of non-conductive material. The Single Sided Printed Circuit Boards are covered with a layer of copper on bottom side. It diminishes the chances of short circuit, thereby providing you total safety. Single Sided Printed Circuit Boards remove the errors, thereby enabling the task of inspection better. Advantages Lower fabrication cost in mass production Provides electronic consistency from assembly to assembly Simplifies identification of components and maintenance of equipment Systematization of component wiring and assembly.

• Thickness: 0.2 to 3.2mm 
• Minimum Punched Hole: 0.9 mm
• Line Width and Spacing: 6 / 6 mils
• Minimum Drilled Hole: 0.35mm

• Maximum Board Size: 600mm X 520mm
• Maximum Number Of Layer: 2 Layer (DSPTH)
• Minimum Conductor Width: 12 mils (0.3mm)
• Minimum Conductor Spacing: 12 mils (0.3mm)
• Minimum Plated Hole Size: 16 mils (0.4mm)
• Board Thickness Tloerence: 10%

A printed circuit board with a conductive circuit pattern one side only. Holes in the board are usually not plated through. A printed circuit board, or PCB, is used to mechanically support and electrically connect electronic components using conductive pathways, or traces, etched from copper sheets laminated onto a non-conductive substrate. Alternative names are printed wiring board (PWB), and etched wiring board. We manufacture an exclusive gamut of single sided printed circuit boards are available in various thickness and track widths. We manufacture single sided printed circuit boards that sizes from 0.4mm to 3.2 mm thickness with the thickness of the copper 18-35-70 micron as per requirement. These single sided printed circuit boards are widely used in various electronics applications. Being single sided circuit board, it connects various electronic components electrically. We can provide customization to our range of single sided printed circuit boards.

• Application: Electronic Device
• Layer Count: 1
• Thickness: 0.6 to 3.2 mm
• Material: FR-1,FR-4
• Voltage: 220 Volt
• Frequency: 50-60Hz
• Min Line Spacing: 0.2 mm
• Copper Thickness: 1 to 3 Oz

;Providing you the best range of Single

single side pcb, Double Side Pcb

single side pcb, Double Side Pcb, PTH Black Mask PCB, PTH Routing PCB

• Packaging Type: Plastic Packets
• Board Thickness: 6 Mm
• Application: Electronic
• Board Type: Single Sided
• Material: Metal
• Min Hole Size: 0.95 mm
• Frequency: 50 Hz
• Voltage: 220V
• Size: 110X50 mm

• Features: Sturdiness, Durable , Fine finish

single sided pcb

single side printed circuit board, Multilayer Printed Circuit Board