Assorts Machine Tool Co. Tronica City, Ghaziabad, Uttar Pradesh

Wooden Ring Mandrel in 2 different handle shapes made of hardwood. Stick Size 3- 15 mm Overall Length 320 mm including handle.

Jewelry Type : Jwellery

made of hardwood, its a must set for every jweler whrther for making or repair job. These clamps can be used for various jobs of inside and outside holding of rings or other delicate jwelery parts. item a- ring clamp holder hand tool specifications holds ring without marring ring clamp measures 6" long leather jaws at both ends. Solid construction- metal hinged. jaw width -1" approx item b- outside ring clamp holder- large & small rings-jwelery working specifications holds ring on the outside in either of the 2 semi circular grooves. This feature gives a full access to the inside surfaces of large or small ring for polishing and any other engraving or texturing processes. overall length: 7-3/4" inches with 2 grooves for ring holding item c - single end ring clamp holder 6"- leather lined jaws jwelery making tool specifications clamp length 6"  leather lined jaws  jaw width: 1" &  jaw capacity : 1/4" thick approx

Jewelry Type : Jwellery

High Quality Wooden Cuploa Punch & Die Set of 6 pieces. Head Diameter of the Mushroom Shape Punches are 40, 45, 50, & 60 mm Double sides Die heads on the wood base-2 on each side, means a total of 4 different sizes. Cup Depression Die on 1 side are of 1-3/8" & 1-3/4" &  Cup Depression Die on 2nd Side are of 2" & 2-1/2"  Base Size : 4-1/4" (Length) x 9-5/8" (W) x 1-1/8" (Height)

High quality wooden cuploa punch & die set of 6 pieces. Head diameter of the mushroom shape punches are 40, 45, 50, & 60 mm double sides die heads on the wood base-2 on each side, means a total of 4 different sizes. Cup depression die on 1 side are of 1-38" & 1-34" & cup depression die on 2nd side are of 2" & 2-12" base size : 4-14" (length) x 9-58" (w) x 1-18" (height)

Made of Quality Tool Steel-Straight Shank  Epoxy Black Finish  Die Holder Sizes are 13/16" (1/2" Straight Shank), 1" (1/2" Straight Shank) & 1-1/2" (3/4" Straight Shank). Supplied on a Wooden base Stand as shown in attached Picture.

Manufactured from stainless steel. Available in S.W.G & A.S.G. Standard  Very useful for measuring thickness of the wires.

Manufactured from high quality carbon steel with a polished finish. Points are hardened for increasing wear resistance. Quick release & lock. Used for scribing circle or arc in a layout work. prod. Code size (in inches) size (in mm) amewd-100 4" 100 amewd-150 6" 150 amewd-200 8" 200 amewd-250 10" 250 amewd-300 12" 300 amewd-400 16" 400 amewd-450 18" 450 amewd-600 24" 600

Type : Wing Type Compass/ Divider

Brand Name : assorts

Material : cast iron

Color : grinded

Country of Origin : India

Manufactured from high quality carbon steel with a polished finish & features a strong pivot point that will penetrate the wood surface. The pencil holder at the tip of the leg ensures stability and accuracy, as well as making nearly any length of pencil usable.

Set includes a wiggler chuck to hold ball contact, disc contact & needle point attachments and an offset indicator holder. Very useful item for locating application points on milling & other machines. Comes in a beatiful wooden case styrofoam packaging.

Manufactured from Stainless steel Square. High Precision & ground.

Gives 3 different types diamond knurling pitches by just revolving the head & locking it at any one required position with a screw lock. Shank Size: 6- 1/2" x 1/2" x 7/8" Shank. Fitted with 3 sets of 5/8" x 3/16" x 1/4" Spiral (Right & Left) Coarse, Medium, & fine Knurl Wheels.

Widely used for Holding & Welding purpose. Can be set at any angle by Size 4" x 2- 5/8" adjustment & locking of the wing nut. Each Block measures 2" x 1" x 1". Overall length & width is 4 -5/8" x 2"

Manufactured from close grain caste iron small precision ground angle plate 2 machined slots in each side. Very useful when face plates work is required or on small milling machines. prod. Code size (inches) size (mm) avwap-111.a 2 x 3 x 2 50 x 75 x 50 avwap-111.b 3 x 3.5 x 2.5 75 x 88 x 63

Type : Webbed Slotted Angle Plate

Material : Cast Iron

Color : Grinded & Black

Finishing : Grinded Finnishing

Brand Name : Webbed Slotted Angle Plate

This new case wrench, commercially called jaxa style case opener designed to open cases of bigger watch to accommodate sizes up to 55mm diameter. includes 4 sets of pins (round, flat, square & curved) to open all types of threaded cases., which are generally found in waterproof watches. These set of pins are selected to match the precise notch pattern on the caseback the tool’s large handle rotates to adjust the bottom pin, and the thumbwheel in the middle adjusts the two pins above.

Size : up to 55mm diameter. Includes 4 sets of pins (round, flat, square & curved)

Color : granded

Country of Origin : India

This new case wrench, commercially called Jaxa Style Case Opener designed to open cases of bigger watch to accommodate sizes up to 55mm diameter.  Includes 4 sets of pins (round, flat, square & curved) to open all Types of threaded cases., which are generally found in waterproof watches. These set of pins are selected to match the precise notch pattern on the caseback The Tool’s large handle rotates to adjust the bottom pin, and the thumbwheel in the middle adjusts the two pins above.

Made of High Grade Alloy Steel Self Centering Holder, Interchangeable Punches, which are heat treated to harden & then ground for sharpness and durability which gives you a fine cutting edge Ideal to punch holes in Rubber, Felt, Leather, Plastic etc. The Punches covers a size range from 5- 32 mm which includes 5,6,8, 10,12.5, 16,20, 25& 32 mm

This is an accessory item compatible for myford ml7 lathes and other smaller mini lathes. Table size is 125 mm x 100 mm. It has a reading bush at the handle for calculating accurate travel of the bed and hence a precise job. The thread comes both in metric as well as imperial standard as per customer's market requirements.

Type : Vertical Slide for Lathe- Fixed

Brand Name : ASSORTS

Country of Origin : India

Manufactured from high quality seasoned casting. Precision ground to serve as a Vee Block & Angle plate together. Multiple Clamping points & 2- Tee Slots for clamping

Manufactured from high quality seasoned casting. Precision ground to serve as a vee block & angle plate together. Multiple clamping points & 2- tee slots for clamping. Product code size (inches) size (mm) avvap-t335 3" x 3" x 5" 75 x 75 x 125 mm avvap-t446 4" x 4" x 6" 100 x 100 x 150 mm avvap-t557 5" x 5" x 7" 125 x 125 x 175 mm avvap-t668 6" x 6" x 8" 150 x 150 x 200 mm

Brand Name : Vee Angle Plate-Tee Slotted

Finishing : grandinig finishing

Material : cast iron

Color : grinded

Country of Origin : India

Manufactured from high quality seasoned casting. Precision ground to serve as a Vee Block & Angle plate together. Multiple Clamping points.

Manufactured from high quality seasoned casting. Precision ground to serve as a vee block & angle plate together. Multiple clamping points. product code size (in inches) size (in mm) avvap-s335 3" x 3" x 5" 75 x 75 x 125 mm avvap-s446 4" x 4" x 6" 100 x 100 x 150 mm avvap-s557 5" x 5" x 7" 125 x 125 x 175 mm avvap-s668 6" x 6" x 8" 150 x 150 x 200 mm

Brand Name : Vee Angle Plate- Slotted

Finishing : grandinig fhinishig

Type : Vee Angle Plate- Slotted

Material : cast iron

Color : grinded

Country of Origin : India

Description: Sturdy V clamp type knurling tool. Can be clamped in Standard Holder of the Quick change tool post on the lathe. Tool Capacity ranges 5 -20mm Holder size : 38" x 38" x 2 -14" Paired with diamond kurls - left hand and right hand. Knurl size - 34" x 38" x 14" bore.

Type : v clamp type knurling tools

Brand Name : ASSORTS

Material : Alloy Steel

Application : Knurling

Country of Origin : India

The 2" (50 mm) machined aluminium face has 60 holes with 8 loose pegs or pins. Jaw opens: 34" (inches) the pegs allowed its positioning in the holes to hold any flat, small or irregular shape parts for engraving, carving, filing, stone setting and jwellery making etc. Removable handle allows tool to be screwed directly to bench.

Manufactured from close grained high tensile seasoned cast iron. Screw spindle made of tool steel for longer life. Fully hardened & ground tool steel jaws. The swivel base is graduated 360 degrees in 1 degree increement. The 3rd angular slide with a moving axis allows any setting in 3d plane. Allows the work piece to set at any angle. Ideal for tool & cutter grinders. Prod. Code jaw width (inches) jaw width (mm) jaw opening (inches) jaw opening (mm) jaw depth (inches) jaw depth (mm) avumv-050 2" 50 2" 50 1" 25 avumv-075 3" 75 3" 75 1-14" 33 avumv-100 4" 100 4" 100 1-12" 38

Brand Name : assorts

Condition : new

Country of Origin : India