Conpro Chemicals Private Limited Sahibabad, Ghaziabad, Uttar Pradesh

We offer Waterproofing Agent, Bonding Agent etc. Description : conpro sb-4 is a special styrene butadiene copolymer emulsion based additive for concrete and mortar to increase adhesion strength, water resistance, chemical resistance and abrasion resistance. uses : conpro sb-4 can be used as additive for:bonding of old concrete to new concrete water proofing coatingplaster work on difficult surfaces levelling & repair mortar jointing & bonding of common masonary works crack filling of roofs, terraces, walls etc. In lime & cement paints to improve bonding and water resistance cement mortar for improved chemical resistance. Advantages : conpro sb-4 has following advantages increases the bond strength of cementitious mortar & concrete by more than 5 times.decreases water permeability of cementitious mortar, concrete & coatings.improves chemical resistance increases flexural, tensile strength and elasticity.

We Offer Water Thinnable Epoxy Coating. Description: CONPRO EP-8 is a two component, epoxy based waterproofing compound. After mixing both the components , it can be thinned down with water. In cured condition, it is hard, tough, abrasion resistant material. It is resistant to wide range of chemicals including many acids, alkalies, minerals oils, solvents etc. It also has excellent resistance to water .One of the major advantage of CONPRO EP-8 over solvent based epoxy is that it can be applied on damp surface also. Being free from solvents , it does not pose any health hazard to the applicator. Advantage:Water thinnable.Non-toxicCan be applied over damp surfaces. Resistance to the growth of fungus and micro-organism. Scope of use: CONPRO EP-8 is a coating system recommended for use over cement bound surfaces like concrete, screed and plaster specially water storage tanks , toilets , kitchens walls , breweries , food processing industries.

We Offer Wall Epoxy Coating. Description: CONPRO EP-1-1 is a solvent free, pigmented, two component system consisting of epoxy resin and specially formulated hardener. ln cured condition, it is hard, tough, abrasion resistant material It is resistant to wide range of chemicals including many acids, alkalies, minerals oils, solvents etc. It also has excellent resistance to water and many chemicals used for food processing. Scope of use: CONPRO EP-1-1 is a coating system recommended for use over vertical as well as horizontal MS surfaces like storage tanks, pipes, methane upload reactors etc. Major applications of CONPRO EP-1-1 is in chemical industries, sugar industries, distilleries

We offer Solvent Free Epoxy Primer and Coating. Description: conpro ep-2 is a low viscosity, epoxy based, solvent free two component primer and coating system. In cured condition, conpro ep-2 is a hard, tough and abrasion resistant material. It is resistant to a wide range of chemicals including many acids, alkalies, mineral oils, solvents etc. It also has excellent resistance to water. Due to its low viscosity it is suitable for crack filling. Scope of use: conpro ep-2 is used: as primer coat on cement bound surfaces and metals.for providing anti - skid finishes and sealings.in levelling coats.inepoxy clear finish coats.

We offer Solvent Free Chemical Resistant Epoxy Coating. Description: conpro ep-1 is a solvent free, pigmented, two component system consisting of liquid epoxy resins and specially formulated hardener. In cured condition, conpro ep-1 is a hard, tough and abrasion resistant epoxy flooring. It is resistant to a wide range of chemicals including many acids (inorganic), alkalies; mineral oils, solvents etc. It also has excellent resistance to water. scope of use: conpro ep-1 is a coating system recommended for cement bound surfaces like concrete, screed and plaster. It can also be used over iron and steel. major applications of conpro ep-1 are as floor coatings in chemical, mechanical or pharmaceutical industries, computer rooms, chemical laboratories etc.

We offer Silicone Based Water Repellent Coating. Description conpro wr is silicone based, single component , colourless clear liquid coating that penetrates into open pores into mineral substrates and make it water repellant.it prevent water penetration , has good permeability to water vapour thus allow the masonary surface to breathe naturally. scope of use conpro wr is used to protect vertical exterior surfaces like concrete, natural stones, artificial stones, clay bricks, cementitious plaster, cement paint coated surfaces etc.against driving rain and frost with improvement in self cleaning properties.

We Offer Self Level Epoxy Topping for 3mm Thickness. Description: Conpro EP SL 3 is a solvent free, pigmented three component system consisiting of liquid epoxy resin , specially formulated hardener and high quality fillers.In cured condition, it is hard, tough abrasion resistant material.it is resistant to wide range of chemicals including acids, alkalies, mineral oils, solvents etc. It also has excellent resistance to water. Scope of use:It is a self levelling system recommended over cement bound surfaces like concrete, screed and industrial tremix floors.Major applications are as floor toppings in automobile industries, home appliance industries, hospitals,pharmaceutical industries, dairy industries,agrochemical industries,chemical laboratories etc.

We Offer Self Level Epoxy Topping for 2mm Thickness. Description: Conpro EP SL 2 is a solvent free, pigmented three component system consisiting of liquid epoxy resin , specially formulated hardener and high quality fillers.In cured condition, it is hard, tough abrasion resistant material.it is resistant to wide range of chemicals including acids, alkalies, mineral oils, solvents etc. It also has excellent resistance to water. Scope of use:It is a self levelling system recommended over cement bound surfaces like concrete, screed and industrial tremix floors.Major applications are as floor toppings in automobile industries, home appliance industries, hospitals,pharmaceutical industries, dairy industries,agrochemical industries,chemical laboratories etc.

We Offer Self Level Epoxy Topping for 1mm Thickness. Description: Conpro EP SL 1 is a solvent free, pigmented three component system consisiting of liquid epoxy resin , specially formulated hardener and high quality fillers.In cured condition, it is hard, tough abrasion resistant material.it is resistant to wide range of chemicals including acids, alkalies, mineral oils, solvents etc. It also has excellent resistance to water. Scope of use:It is a self levelling system recommended over cement bound surfaces like concrete, screed and industrial tremix floors.Major applications are as floor toppings in automobile industries, home appliance industries, hospitals,pharmaceutical industries, dairy industries,agrochemical industries,chemical laboratories etc

We Offer Non-metallic Floor Hardner. Description CONPRO FH-1 is a cementitious non-metalic abrasion resistant floor hardener ideally suited for all industrial floors subject to heavy traffic. AdvantagesHigh abrasion resistance.Very high compressive strength.Monolithic.Oil and grease resistant.Easy to apply.Rust free. Shrinkage and crack free.Method of Application For laying of CONPRO FH-1 over base concrete, the following procedure is recommended: Alllow bleeding water on the top of base concrete to evaporate.Ensure that base concrete is hard enough so that light foot traffic movement does not leave an impression of more than 3 mm depth.Spread CONPRO FH-1 uniformly in 3 stages.After spreading one-third of the total CONPRO FH-1 to be used, level the surface with a wooden float.Similarly, spread the rest of the CONPRO FH-1 in 2 stages and level the surface again.Allow the surface to cure as per conventional cement curing methodology.

We offer Integral Waterproofing Admixture for Concrete and Mortar. Description: iw-302 is normal setting, integral cement waterproofing compound that makes concrete resist water through hydrostatic pressure or capillary action. iw -302 complies with is 2645-1975. uses: iw-302 is used for waterproofing of concrete and mortar in : roofs, terraces, balconies water tanks, swimming pools, silos etc.basements, toilets areas exposed to water/moisture etc. Advantages: iw- 302 has following advantages: reduces permeability of concrete to a large extent.arrests saltpetre/efflorescence action prevents bleeding and segregation.allows normal breathing of concrete/mortar.improves workability of concrete.reduces w/c ratio. prevents corrosion of steel reinforcement.chloride free.

We offer Highly Flexible Two Component Waterproof Coating System. Description: wp -2 is cement based two component modified acrylic copolymer emulsion, wp -2 provide waterproofing coating, capable of resisting ground and back water seepage at negative pressure. high flexibility enable it to bridge hairline cracks. uses : wp-2 is used for external and internal water proofing of structures like basements, terraces, balconies, swimming pools, bathrooms, storage water tanks, etc.bridging of crackswaterproofing repair of all the above structures. advantages: wp-2 provides the following benefits: very easy to apply (by brush or roller) excellent adhesion with cement bound surface (plaster, concrete etc.)vapour permeable (breathing active)non toxiccan withstand pressure equivalent to 30m. Waterheadgood abrasion resistancecarbonation resistanceuv resistant highly flexible.

We Offer Highly Effective Tile Adhesive Dry Powder. Description Conpro TA-1 is a polymer modified cement based dry power. This construction chemical is mixed with water to make workable mortar which is highly suitable for fixing of Tiles over cementitious surfaces. Advantages Conpro TA-1 provides following benefitsFlexible to accommodate normal floor movement and temperature variations.High bond strength. Highly workable, ensures speedy work.Application Conpro TA-1 is used for fixing of all types of floor and wall tiles viz Glazed tilesMosaic tiles Terrazo tiles Brick, marble and granite tiles It can be used for tiles/stones/granite cladding on walls and columns.

We offer High Build Synthetic Rubber Coaltar Coating. Description : conpro rc is a high build, ready to use, anti-corrosive and water proofing coating. It is based on coaltar and synthetic rubber. Conpro rc cures to a tough elastic film which is water proof and has good resistance to many corrosive chemicals. It has excellent bond with concrete, mild steel and most of other building materials. scope of use conpro rc is used as protective coating for mild steel and pipelines.conpro rc highly suitable for water proofing of basements, water tanks, swimming pools.conpro rc is used for water proofing of roofs, terraces, chajjas, parapet walls, sunken slabs etc.

We Offer High Build Polyurethane Coating. Description: CONPRO PU-1 is a Polyurethane based , high build, ready to use, anti-corrosive and water proofing coating. CONPRO PU-1 cures to a tough elastic film which is water proof and has good resistance to many corrosive chemicals. It has excellent bond with concrete, asbestos, mild steel and most of other building materials. Scope of use: CONPRO PU-1 is used as protective coating for mild steel and pipelines.CONPRO PU-1 highly suitable for water proofing of concrete roofs, asbestos roofs, basements, water tanks, swimming pools..CONPRO PU-1 is used for water proofing of terraces, chajjas, parapet walls, sunken slabs etc.ApplicationSeal all the crevices with Silicone sealant, or sealer made by mixing Chalk-Mitti with CONPRO PU-1.Apply first coat of CONPRO PU-1 over prepared and primed substrate by brush, roller or airless spray and allow it to dry for 8 hours.Apply second coat of CONPRO PU-1 perpendicular to first coat.Thinner (Xylene) upto 5% may be used for finish coat, if required.

We offer High Build Epoxy Coaltar Coating. Description : conpro ct-3 is a high build, two component, anticorrosive and water proofing coating. It is based on coaltar, epoxy resin and specially formulated hardner conpro ct-3 cures to a tough elastic film which is water proof and has good resistance to many corrosive chemicals. It has excellent bond with concrete, mild steel and most of other building materials. scope of use conpro ct-3 is used as protective coating for mild steel and rcc substrates subjected to water immersion, exposed to marine environment or sub soil condition.conpro ct-3 highly suitable for water proofing of roofs & basement.conpro ct-3 is ideal for protection of under water or sub-soil structures and pipeline, waste water and sewage treatment plants. application apply mixed conpro ct-3 over preapared substrate by brash, roller or airless spray. Second coat should be applied after minimum 12 hours.

We Offer High Build Epoxy Based Chemical Resistant Coating. Description: CONPRO EP-21 is a solvent free, pigmented two component, epoxy based coating specially for steel and concrete. In cured condition, it is hard, tough, abrasion resistant material. B is resistant to wide range of chemicals including many acids, alkalies, minerals oils, solvents etc. It also has excellent resistance to water and many chemicals used in sugar, breweries, distilleries, fertilizer, and chemical industries. Scope of use:CONPRO EP-21 is a coating system recommended over Iron and steel surfaces, and cement bound surfaces like concrete, screed and plaster.Major applicationa of CONPRO EP-21 includes coating over containers, reactors in which chemicals of recommended concerrtratioti is stored. It may also be used tor coating structures.

We Offer Food Grade Chemical Resistant Epoxy Coating. Description: Conpro EP-7 is a solvent free, pigmented, two component, epoxy based coating specially formulated for substrates coming in contact with food and edible-products. In cured condition, it is hard, tough, abrasion resistant material. It is resistant to wide range of chemicals including many acids, alkalies, minerals oils, solvents etc. It also has excellent resistance to water and many chemicals used for food processing. Scope of use: Conpro EP-7 is a coating system recommended for use over cement bound surfaces like concrete, screed and plaster. It can also be applied over iron and steel. Major applications of Conpro EP- 7 are as floor coatings in hospitals, pharmaceutical industries, dairy industries, agrochemical industries, clean rooms etc. In fact where ever it is important to maintain highest standard of hygiene.

We Offer Exfoliated Vermiculite Based Insulating Material. Description CONPRO RI construction chemical is specially graded exfoliated Vermiculite used as thermal insulation material in building industries for roofs, walls and light weight filling at reasonable cost. Vermiculite is the mineralogical name given to hydrated laminar magnesium aluminium silicate CONPRO RI is under IS code 10555 Advantages CONPRO RI has following advantages: Very low density.High thermal insulation.Chemically neutral.Natural, non toxic, ecologically friendly and long life material.Easy and fast application.Resistant to heat and moisture.Method of ApplicationEnsure the surface is clean, free from separating agents like oil, dust, grease, dust and loose particles. Apply one coat of cement slurry to improve adhesion. Apply the mixed mortar on roof or wall without compression as per recommended thickness.Allow the applied material to set and dry for 3 - 4 days. Since it is cementitious material, water later on.On top of insulation apply any terracing material as per requirement.

We are engaged into manufacturing, exporting and supplying of finest epoxy chemicals which are immensely preferred in construction, flooring etc. for Self-levellings. We specialize in Epoxy Coatings, Epoxy Screeds, Epoxy Primers and Epoxy Grouts. The unmatched quality and impressive performance of our product made us one of the successful epoxy chemicals manufacturers and epoxy coating chemicals suppliers in the market. Our epoxy chemicals are very robust and can bear most of mechanical shocks calmly. Lastly, these chemicals are very affordable.

We Offer Epoxy Based Segmental Adhesive. Description Conpro EPGS is a epoxy based solvent free, three component, non shrink, high strength, pourable grout suitable as segment adhesive. Conpro EPGS is resistant to mineral oils , fuels, diesel and wide range of chemicals. Scope of use Conpro EPGS is used as a segmental adhesive for stones, metals, concrete based structures etc.

We offer Epoxy Based Mortar for Flooring, Lining & Patch Repair. Description: conpro ep-3 is a solvent free, epoxy resin based mortar for screeding, repair and improvement of concrete structures. In cured condition conpro ep-3 is a hard, tough with very high mechanical strength, high impact and abrasion resistance. It is resistant to most acids, alkalies, grease, fuels, minerals oil etc. scope of use:epoxy screed flooring in industries for high mechanical wear & tear.lining of storage tanks of chemicals which are corrosive in nature.bedding mortar for a.r (acid resistance) tile lining etc.patch repair/pothole repair of all thicknesses.

Country of Origin : Made in India

We Offer Epoxy Based Concrete Impregnate. Description: Conpro EP-6 is a epoxy based, transparent, two component, low viscosity impregnate material for cement bound surfaces like concrete, screed, plaster etc. It enter deeply into the substrate and fills all the pores and capillaries. It improves the hardness, abrasion resistance and chemical resistance of the substrate. Conpro EP-6 is resistant to mineral oils, fuels, diesel, and effluent water. Scope of use: Conpro EP-6 is used as impregnating coating for cement bound surfaces like industrial floors, petrol pumps, car parks, storage rooms aeroplane hangers, terraces, balconies etc.