Effluent Treatment Plant Dealers in Ghaziabad

• Warranty: 1year
• Application: Water Recycling,Other
• Automatic Grade: Automatic,Other
• Color: Green
• Automatic Grade: Automatic,Manual
• Certification: ISO 9001:2008
• Condition: New
• Driven Type: Electric
• Weight: 100-1000kg
• Voltage: 220V
• Type: Etp Plant,Other
• Power: 5-10kw,Other

• Voltage: 220V, 380V, 440V
• Automatic Grade: Automatic
• Driven Type: Elecric, Mechanical
• Feed Flow Rate (cubic-meter/day): 100 - 2000
• Capacity Inlet Flow Rate (cubic meter/hour): 100 m3/hour
• Installation Type: Completes Civil Work with Installation
• Finishing: Polished
• Rust Proof: Yes

• Brand Name: Trity Environ Solutions
• Driven Type: Electric
• Color: Blue
• Condition: New
• Automatic Grade: Semi Automatic, Manual, Fully Automatic, Automatic
• Application: All
• Country of Origin: India

  Effluent Treatment Plants (ETPs) are pivotal in managing industrial wastewater and safeguarding our environment. Trity Environ Solutions is at the forefront of this mission. ETPs treat industrial wastewater to prevent harmful pollutants from entering the environment. Regulatory guidelines mandate their use due to the severe environmental impacts of untreated effluents. Trity Environ Solutions excels in designing tailored ETP solutions for various industries. Their cutting-edge technology optimizes efficiency and ensures environmental compliance. Beyond treatment, Trity Environ Solutions focuses on sustainability and resource recovery, with systems for water reuse, biogas generation, and nutrient recovery. They offer ongoing maintenance and support to uphold environmental responsibility. Trity Environ Solutions represents the future of sustainable industrial practices. For businesses seeking cleaner, greener operations, they offer efficient Effluent Treatment Plants.  

Premium grade, cost-effective prices and unsurpassed standard distinguishes our Wastewater Treatment Equipment from others in the marketplace. Based in Uttar Pradesh(India), our organization is involved for years in supplying the finest grade of Wastewater Treatment Equipment in the industry.

• Capacity (KLD/MLD): 1 MLD
• Application Industry: Residential & Commercial Building
• Material of Construction: Mild Steel
• Water Source: Commercial Waste Water
• Treatment Stages: Primary Treatment, Secondary Treatment
• Warranty: 1 Year
• Country of Origin: Made in India
• Installation Type: Containerized Plug & Play
• Inlet Flow Rate(m3/day or m3/hr): 1000 m3/day
• Treatment Technology: Mixed Bed Bio Reactor(MBBR)
• Control Module: Available
• Automation Grade: Automatic

Over a period of one decade Ghaziabad Polymers Pvt. Ltd. is actively engaged in the design and erecton of Effluent Treatment Plant and water recovery catering to the need of industry up to client's satisfaction. The service covers a wide spectrum of industries like Textile, Food Industry, Paper Unit, Pickling Units etc. many of prestigious clients like Birla Group, Pepsico, Winsome, Shahi Group have already been a prestigious clients of GPPL. The service provided also covers a versatile range like production of Bio Gas from effluent, design of activated Sludge process, Tertiary process for paper effluent and Textile effluent has been a notable success in the journey on environmental path. Starting from a modest capacity upto several 25MLD in the remarkable shortest possible execution time.GPPL has long-term experience in the industrial wastewater treatment sector. the resulting expertise is advantageously employed for the technical and economic optimization of very subsequent facility. The treatment process may contain physio-chemical, biological (Anaerobic and Aerobic) and other process steps. In the case of Biological( Anaerobic), we offer low and high rate reactors chosen specific to the client's needs based on the applications. We have experience of designing and building up many small-medium-large-scale plants on the basis of the world's most frequently used UASB process. We also offer a high rate digester for medium organic strength wastewater that combined the two technologies together under an anaerobic environment i.e. UASB and Anaerobic Filler. Our innovation on the technologies continues to provide word class and most advanced solutions to our customers on account of meeting their objective completely.Our Environmental Zone offers a range of specialized Engineering services and turnkey solutions based on practical experience garnered over the years in following areaS

Filter Press The filter press basically consists of a number of chamber filter plates (also referred to as recessed filter plate pack) mounted vertically on and between two sidebars or suspended from an overhead support beam. A filter cloth is mounted over each of the two faces of the filter plate. The cloth is joined at the feed eye by an impervious sleeve or tube also known as a barrel neck. Filter Press Feed Cycle:- Step 1 : Sludge is fed into the filter press by a suitable pumping system and passes through the feed eye of the succeeding plates along the length of the plate pack until all chambers are full of slurry. This is known as the fast fill portion of the filter cycle. Step 2 : Flowing under pressure, the solid particles begin to deposit on the surface of the filter cloth forming the initial layer of filter cake referred to as the pre-coat. Once applied, this pre-coat layer becomes the actual filtering medium. Step 3 : As filtering continues the cake thickness gradually increases, until the adjacent filter cake in each chamber touch or bridge. At this point of the filter cycle, the dewatering phase enters into final cake consolidation to achieve maximum cake dryness. Filter Cloths The filter cloths are woven fabrics using monofilament or multifilament synthetic fibers or a combination of both. The most commonly used materials are polypropylene, polyester, and nylon. Filter cloths are primarily selected for filtration, strength, and cake release properties. Sludge Drying Bed Sludge drying beds may be used for dewatering sludge. Drying beds are confined, under drained and shallow layers of sand over gravel on which wet sludge is distributed for draining and air drying. Drying beds have proved satisfactory at most small and medium-sized sewage treatment plants located in warm, dry climates.

• Treatment Technique: Mixed Bed Bio Reactor
• Material: Mild Steel
• Water Source: Industrial Effluent
• Capacity Inlet Flow Rate: 1 KLD
• Usage/Application: To Treat Waste Water
• Automation Grade: Automatic
• Air Blower Power: 3 HP

Being a technology-oriented company, Maxtic Environmental, makes sure that cutting-edge technology and optimal overall qualities of HCSD System should be maintained by means of expertly implementing global Quality-Management Program and complying with standard stipulated by the international industry. With the commitment to becoming a globally dependable company, the company has come up as a leading Manufacturer, Exporter, Importer, Trader, Supplier of higher-capacity HCSD System that features effectively conveying of slurry and efficient disposal of high concentration slurry. On a path of succeeding the fulfillment of vision of Maxtic Environmental Pvt. Ltd., we have diversified ourselves to a technology which is widely accepted by the organization seeing their inability to store and convey the dry material and looking for an alternate technology. We also provide Material Conveying Systems with low power consumption. The features and benefits of HCSD System is simply endless. Following are the key feature & benefits. Key Features of HCSD: Assuring of the control over conveying activity Assuring of excellent transfer output Guarantee for precise slurry conveying Assuring of higher reliability in performance Key Benefits of HCSD: It can convey coarse particle up to 25 mm under any circumstances up to longer distances. In other words with a particle size of up to 80 % of the outlet diameter can easily be conveyed. Due to less no of moving parts, lesser maintenance is required. Due to lesser stroke in comparison to other pump manufacturers, less wear and tear occurs. Application of HCSD: Disposal of Slurry consisting a mixture of Fly and Coarse Ash in high concentration with water upto longer distance in Power Plants. In Sewage Works. Tunnel Construction Mineral Oil extraction and processing.

sludge dewatering machine, FRP Underground Water Storage Tank

well point dewatering systems, Dewatering Pump, Dewatering System

etp plant, Bulk Storage Tanks, Heat Exchanger, Reaction Vessels

Industrial waste water is one of the major source for water pollution. As an industry leader, Hitech has always been bringing new approaches in waste water. Our treatment and designs are based on updated technology and it makes treated water reusable and optimizes sludge production. Hitech have done more than 100 successful installations in all over India.

Virgin envirotech - we as an organization gained a strong foothold in the domain of manufacturing, supplying of effluent treatment plant in india.

We are a credible Supplier of Effluent Water Treatment Plant based in UP, India. The entire range of Water Treatment Plants is designed using advanced technology. Our Effluent Treatment Plant are in high demand in various chemical and automotive industries to purify water from hazardous and toxic chemicals. Some of the salient features of our Water Treatment Plant are resistance to toxic chemicals, sturdiness and high thermal resistance.

• Type: Anaerobic Digesters, Activated sludge process ,Chemical treatment etc.
• Brand Name: GWET
• Application: Waste water /effluent treatment
• Power Source: NA
• Color: on choice.

We are leading supplier of effluent treatment plant for all kind of industries. We are providing all solution for effluent treatment like anaerobic, aerobic, chemical treatment . We also offer dm plant, ro plant.

We are dealing best Water Treatment supplying company.

Water Aeration System, drip irrigation filter, Solar Light