Epoxy Coatings Dealers in Ghaziabad

• Grey Colour Powder Coatings: Pure Polyester Powder Coatings
• Epoxy Polyester Powder Coatings: Architectural Grade Powder Coatings
• Qualicoat Approved Powder Coatings: www.rapidcoat.com

Anthrazitgrau Anthracite grey Gris anthracite Gris antracita Grigio antracite Antracietgrijs Powder Coatings (Available Gloss: Glossy, Semi Glossy, Satin, Matt, Semi Matt, Dead Matt) (Available Finishes: Smooth, Structure, Texture) Application: Automotive Components, Architectural, Appliances, Agricultural & Construction Equipments, Furniture, electrical components, Gas Cylinder, Fire Extinguisher, Steel Door, Shutters & Louvers, Fire-Rated Doors etc.

• Size: 20 Kg
• Type: Coatings
• Material: bitumen based
• Certification: ISO 9001:2008 Certified
• Application: Flooring, Wall Coating
• Form: Liquid
• Feature: Water Resistant, Waterproof
• Speciality: Pasting On Walls

ShaliKote® T-10 / ShaliKote® T-10A is recommended for waterproofing of leaky walls / surfaces or places where heating of bitumen is not desirable or prohibited. Advantages ShaliKote® T-10 gives a coating, which, when set, is impermeable to water and remains unaffected by attacks of industrial fumes, saline atmosphere, etc. It resists low temperature cracking and also does not crack under the influence of strong sunlight. ShaliKote® T-10A has smoother finish and better flow as compared to ShaliKote® T-10 Health & Safety   Lid of the container should be firmly fixed, when not in use.   Use goggles and hand gloves during application Clean hands with water after application. Packing ShaliKote® T-10 / ShaliKote® T-10A is available in 20 kg and 200 kg drums. Storage Keep in cool and dry place in air tight containers under shed away from heat. Application Methodology Wire brush and clean the surface thoroughly to remove all dirt and loose particles. Dilute ShaliKote® T-10 from its pasty consistency to light consistency by adding water in the ratio of 1:1. Apply this diluted material on the roof surface as primer. No dilution should be done in case of ShaliKote® T-10A. When the primed surface is dry and has turned black from its original brown colour, apply ShaliKote® T-10 and allow the emulsion to break. It will turn black from its original brownish colour. When the emulsion has set in, spread coarse sand or crushed stone chips over the surface.

We offer High Build Synthetic Rubber Coaltar Coating. Description : conpro rc is a high build, ready to use, anti-corrosive and water proofing coating. It is based on coaltar and synthetic rubber. Conpro rc cures to a tough elastic film which is water proof and has good resistance to many corrosive chemicals. It has excellent bond with concrete, mild steel and most of other building materials. scope of use conpro rc is used as protective coating for mild steel and pipelines.conpro rc highly suitable for water proofing of basements, water tanks, swimming pools.conpro rc is used for water proofing of roofs, terraces, chajjas, parapet walls, sunken slabs etc.

• Type: Pure
• Application: Industrial
• Color: Transparent
• Packaging Type: Can
• Form: Liquid
• Packaging Size: 700 ml

• Grade Standard: Industrial Grade
• Shelf Life: 1Year
• Packaging Type: MS Drums
• Packaging Size: 450 Kgs
• Usage: Industrial Use

This is a Defence Grade Coating. For more details please contact us.

• Brand Name: Nerolac, Paramount, Prominent
• Color: All
• Industry: Powder Coating

We offer Water Thinnable Epoxy Coating. Description: conpro ep-8 is a two component, epoxy based waterproofing compound. After mixing both the components , it can be thinned down with water. In cured condition, it is hard, tough, abrasion resistant material. It is resistant to wide range of chemicals including many acids, alkalies, minerals oils, solvents etc. It also has excellent resistance to water .one of the major advantage of conpro ep-8 over solvent based epoxy is that it can be applied on damp surface also. Being free from solvents , it does not pose any health hazard to the applicator. advantage:water thinnable.non-toxiccan be applied over damp surfaces. resistance to the growth of fungus and micro-organism. scope of use: conpro ep-8 is a coating system recommended for use over cement bound surfaces like concrete, screed and plaster specially water storage tanks , toilets , kitchens walls , breweries , food processing industries.

• Material: HDPE, LDPE, PE, Plywood, PP, PVC
• Pattern: Dotted, Plain, Printed
• Texture: Hard, Soft
• Form: Liquid, Solid
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm, 3.5-4mm, 4.5-5mm
• Application: Flooring, Wall Coating
• Feature: Eco Friendly, Optimum Quality, Solvent Resistant, Water Resistant, Waterproof

We are offering plastic coatings manufacturer and supplier in uttar pradesh, india. Our specialization lies in making base coat for plastic and different types of finishes. We also provide top coat clear for the same. Clients can avail plastic coatings in required quantities from us. We provide plastic coatings at reasonable prices to the clients located all over the country. plastic coatings are ideal for finishes like : silvermetallicpearlised the finishes are applicable on : plastic moulding itemshandless itemsbriefcasesaccessories

• Form: Powder
• Feature: Chemical Resistant
• Categories: Solid Color

We are the leading supplier of this products.

• Packaging Size: 20ltr
• Color: White
• Type: Acrylic
• Form: Liquid
• Material: Acrylic
• Features: Pre-batched components, Hand or spray applied, Easy and fast mixing, Very good adhesion with sound and prepared substrates.
• Brand: Sika

• Packaging Size: 500 ml

Rubber coating Can be easily sprayed or onto any surface for providing long term sealing, insulation and protection against moisture, dust and other air borne contal, With simple paint like application…tough flexible, non-ageing rubber insulation coating, enabling tight conformal insulation and proofing on a variety of surfaces

  PCB Coating is a single component acrylic plastic coating,fat drying,conformal,water clear transparency,good electrical properties, high resistance to burning, heat,cold,silts,alkalies,mild acids-will not peel crack or dis-color,solder through and removable is not required if required, lasting protection against wear, handling and oxidation, excellent thermal conductivity.

• Features: Long shelf life , Purity, Eco-friendliness .

heat resistant coating, floor cleaners, 3D Flooring Material, coating resin

• Packaging Size: 25kg
• Packaging Type: Drum
• Usage: Industrial
• Grade Standard: Chemical Grade
• Physical State: Liquid

heat reflective roof coating, cool roof paint, Cleaning Service

acrylic powder coating, cfl light fixtures, LED Light Fixtures

bituminous coating, road emulsion, immiscible liquid coating

glass coatings, Glass Product, Wood Coatings, Acrylic, Lamination

Ceramic Coating, fast steel putty, titan bond putty, wear resistant putty

Coatings, acrylic paints, Plating Chemicals, Electrophoretic Lacquers

Water Repellent Coatings, jaquard fabric, Knitted Fabrics, Polyester Fabrics

cadmium plating, Hard Chrome Plating, Hard Anodizing

anti skid coating, Road Safety Equipment, Road Safety Products

aluminum powder coating

Powder Coating, erw pipe cutting

Copper Coil Coating, coil coatings

Phosphorescent Coatings, nitrocellulose lacquer, Stoving Thinner