Industrial Heaters Dealers in Nandgram, Ghaziabad

Aluminium Casted Heater are made from aluminium, mild steel and brass castings, these are highly durable and have higher temperature applications.  1)Aluminum Cast In Heaters2) Brass Castin Heaters3)Gun Metal Cast In heatersApplications:Injection & Blow MouldingExtrudersMoulds & DiesMedical EquipmentsThermoforming Equipments 

The company manufactures premium quality Bobbin Heater which is made by fully immersed applications and with side fitting. The product is made from high Grade M.S., S.S. titanium pipe. We specifically designed and developed this Tubular Air Heater to fulfill the requirements of our customers.

the leading manufacturers of infrared equipments and heating elements. Our Infrared equipments are made with latest technology and research to provide best quality for our customers. Our Infrared Heaters are designed to produce maximum output in form of heat energy. They are constructed by a firmly burnt-in heating coil. The heater incorporates highly heatproof resistance wire that provides safety against much damage. Longer service life is achieved since the resistance of the heaters is made to remain constant over the whole temperature range. The glaze used in this heater has excellent radiation properties therefore the radiation efficiency is also very high.

Description   · Multistart concentric coil (pressure part) Fabricated out of seamless pipe to ASTM 304 sch-40 forming three passes in close circuit design.· outlet Shell of carbon steels enclosing the pressure part, complete the shells facilities. · Double stage Pressure automatic burner· One motorized fuel oil pump· One oil filter · Oil piping from filter to burner· Sequence Controller-LOA-24, Fuel Pump or another Thermic Fluid Pump- Ksb or other,Motor-Cromption, Contractors-L & T or equipment, or equipment, Coil-Tata or Jindal Seamless   MOUNTING, INSTUMENTS, CONTROLS AND SAFETIES   · One fuel oil pressure indicator at burner inlet.· Two pressure indicator complete with isolating needle valves on each at the inlet and outlet of thermic fluid heater.· One temperature indicator cum controller to indicate and control the burner at return the thermic fluid line.· One temperature indicator cum controller at the outlet of the heater for safety cut of the burner.· Light dependent resistor (photocell) to monitor the flame ignition transformer.· Audio-alarms for abnormal operating conditions.· Power coated, dust proof, prewired control panel housing electric isolator switch, contactor, sequence controller, temperature controllers, indicating lamps, , fuses .   BATTREY LIMITS   · Inlet and outlet flanges of the main unit.· Inlet and outlet flanges of thermic fluid pump.· Inlet of oil filter.· Flue gas outlet flange on thermic fluid heater.· Electrical terminal connecting on our control panel, circulating pump motor.

Hindon Electricals make Casting Heater Iron, Brass, Aluminum  is manufactured and supplied by some of the leading companies like us who are always there to provide a range of variety to their client with the changing time and technology. The casted heating products we deliver are made with high grade cast iron and engineered in a very detailed manner. The casted heater Supplier in casted heater Haryana design these products in a very finished manner to enhance the temperature of the application to enable in heating things like dies, nozzle which work in a very efficient and durable way. Being one among the leading companies in casting heater manufacturer we see to it that our clients stay happy with latest products that are built in with the most advanced technology and tools. You can always get in touch to get the best price Applications Of Casted Heaters Heat dies and nozzles Heating Industry Food Industry Painting Industry Fiber industry Glass and ceramics industry Paper industry Farming and animal husbandry Features Of Casted Heaters High operating temperatures Air-cooling option Resistant to damage Precise and accurate control High watt densities available  

While packaging, we ensure that the products enclosed are protected from external damaging factors inclusive of vibration, mechanical shock, compression or temperature. Our storage facility is capacious to maintain large stock. So, clients are free to approach us for urgent and massive requirements.

We supply an exceptional range of High Frequency Induction Heaters. These High Frequency Induction Heaters offer essentially a non-contact heating process that uses high-frequency electricity for heating materials and are electrically conductive in nature. These High Frequency Induction Heaters provide high-frequency induction on a non-contact basis, generate heat inside the work piece themselves and do not contaminate the materials being heated. Our High Frequency Induction Heaters can also be customized as per client̢۪s specifications.

• Type: Solar Water Heater
• Condition: New
• Warranty: 5years
• Application: Water Heating
• Automatic Grade: Fully Automatic

Solar water heating systems include storage tanks and solar collectors. There are two types of solar water heating systems: active, which have circulating pumps and controls, and passive, which don't.  

• Efficiency: Overall efficiency of 93% on NCV of fuel without Heat Recovery Unit.
• Brand Name: JSON BOILER
• IBR Approved: No
• Capacity: 50,000 Kcal/hr - 10,00,000 Kcal/hr
• Temperature: 50-90 Deg. C
• Burner: Own make / imported combustion concept make pressure jet type, continous moduling, fully automatic
• Fuel: Diesel, Oil, Gas, Heavy Oil, Furnace Oil, Biodiesel, Wood & Coal Fire

Json, hot water generators consist of a shell and tube type heat exchanger which is duly insulated to prevent radiation losses. The ventilation blower fitted alongside blows fresh air over the combustion chamber and the set of smoke tubes. In oil / gas fired options, an imported mono-block type fully automatic burner is provided for combustion of fuel. Hot water Generators can also be offered in solid fuel firing options. A dust-proof, pre-wired control panel is also supplied as a standard supply to control the operation of the unit based on customer requirements. HOT WATER GENERATOR APPLICATION Textile IndustriesHotel IndustriesPowder CoatingFood IndustriesPaper IndustriesSugar IndustriesPharmaceutical IndustriesHospitals & Institues

Material: Stainless steel, Encloy, copper, Mild Steel, Wattage/Power: 100 – 6000 Watt. Operation Running Voltage: 24 volt, 220 volt, 230 volt, 240 volt, 415 volt Available: In .312″, 375″, 430″, 475″and.625″ element diameter. Temperature Up to 850° F /550° C. Tubular / manifold Heaters A designed helical coil of Nickel-Chromium alloy resistance wire with the ration of 80%-20% is welded to nickel-coated steel terminated cold pin. Once this coil assembly is stretched and centered in the element sheath, then the coil is filled with MgO (Magnesium Oxide) powder. Tubular heaters are the widely used heaters in many commercial, industrial and scientific applications. The Tubular heater can be formed in any shape and cast into elements. Once the coil is filled with MgO powder, it is then compacted to permanently stabilize the coil in the center of the tube. Tubular heaters are also called electric tubular heaters. Ultimately, a good quality of tubular heater provides excellent rapid heat transfer, dielectric strength between coil and sheath, durability with an industry resistance tolerance of -5%,+10% which reciprocate and translate to wattage resistance tolerance of -10%,+5%. Length tolerance of tubular heater is +/- 1% with available customized diameter of tolerance +/- 1%. Watt density of tubular heaters will govern internal resistance wire temperature and sheath and is calculated with the following formula: Watt Density (w/in2) = Element Wattage / (π × Element Dia. × Element Heated Length) Water heating coil or the electric heating coil is used in winters everywhere to heat the water for bathing and drinking. Following are the elements to construct tubular Heaters: Tubular sheath material selection: It is based on chemical composition of the gas or liquid being heated, process control and the characteristics of elements entering into solution. Incoloy® 840 for maximum sheath temperature: 1600°F / 871°C (Air Heating Application) Incoloy® 800 for maximum sheath temperature: 1600°F / 871°C (Air heating, immersion heating of portable water and liquid applications) 316 Stainless Steel for maximum sheath temperature: 1200°F / 649°C (improve corrosion resistance used in deionized water) 304 Stainless Steel for maximum sheath temperature: 1200°F / 649°C (Industrial, Medical, and Chemical Application) 321 Stainless Steel for maximum sheath temperature: 1200°F / 649°C (To prevent carbide precipitation in certain medium) Copper for maximum sheath temperature: 350°F / 177°C (used for clean heating water) Steel for maximum sheath temperature: 750°F / 399°C (used for high to low viscosity oils, asphalt, tar, wax, molten salt, heat transfer liquid media) Inconel ® 600 for maximum sheath temperature: 1800°F / 982°C Incoloy® 825 for maximum sheath temperature: 1100°F / 593°C Same like this, you need to define your sheath surface treatment material, termination style and option with mounting methods, bending formation and moisture seals in standard sizes and ratings. For orders and inquiries of the Tubular heater, one needs to specify the following requirement to manufacture company. As well as you should know about tubular heater manufacturers and heating coil manufacturers. Some of the eaters are called ring heaters, as they have round shape. Shape, dimensions Application purpose, medium Tube diameter, material, unheated tube length Installation and fastening elements Electrical connection Voltage, power rating Desired quantity Once you provide these requirements, ask for quote and order! If you have any question or any query. Please contact us if want to know about some more about our product. Product Details: Minimum Order Quantity:    6 PiecePower(Watts):                            As per requirement of applicationVoltage:                                         As per requirement of applicationSize:                                                As per requirement of application

• Features: No wastage of steam,Saving of fuel up to 15% to 20%
• Voltage: 380-440V
• Power Source: Electric
• Power: 25 HP
• Usage/Application: Industrial

• Type: Water
• Certification: ISI Certified
• Condition: New
• Warranty: 1year
• Country of Origin: India
• Brand Name: Summercool
• Application: Water Heating

Instant hot water,20 minutes safety cut,over heat protection 

Immersion Heater The Thermocool name is renowned for innovations as well which is reflected in the design of pioneering product concepts such as Fresh air fans, and models in the mini category. Now Thermocool. has diversifIed even further. Pumps, home appliances, have been added to Thermocool’s portfolio. Good quality, great performance and novelty in design are some of the assured features of any product from Thermocool.

• Range: 50 - 680 m2 heating surface

Multi-circulation Efficient distribution of steam Cover plates provided with balancing device for easy opening Leak proof passes for higher efficiency Interchangeability of operation Positive removal of condensate Adequate venting

The CAHP heat pump water heater is an integrated system that utilises the heat pump technology to provide more efficient way to heat water with electricity. CAHP pulls heat from surrounding air and deposits the heat into the tank. The end result is very efficient production of hot water with cooler and dehumidified air as a welcome by-product. Suitable for villas and light commercial applications.

Die Heaters

Solar power backup system, Street Lights

Thermic Fluid Finned Air Heater, Hot Water Boiler, Thermic Fluid Oil