Industrial Pump Dealers in Vasundhara, Ghaziabad

We are well known for supplying of wide variety of Vacuum Pump.

• Features: Low power consumption , High efficiency

We are highly appreciated in the market for our vast array of Single Stage Rotary Vane Pumps. High grade spare parts and components are used by our vendors to manufacture the offered pumps. Customers can avail these pumps from us in spectrum specifications at industry-leading prices.

• Material: Mild Steel
• Head: 20 m
• Max Flow Rate: 500 lpm
• Temperature: 15-40 Degree C
• Inlet: 1 Inch BSP
• Surface Finish: Paint Coated

• Head: to 55 m
• Power: up to 45 kW
• Capacities: up to 500 lps
• Solids: up to 92mm

STEADY SERIES Steady Flygt 1300 is a new series of submersible pumps that deliver top-level performance at outstanding value. It is ideal for wastewater, sewage and surface water pumping, in municipal and building applications. Six sizes to choose between – 1310, 1315, 1320, 1325, 1330 and 1335 A selection of combination options – Discharge connection, impeller etc Pumping capacities from 10 to 55 m and 15 to 500 l/s

• Capacity up to: 400  M3/Hr
• Head up to: 55 MLC
• Work. Pressure: 15 Bars
• Work. Temperature: 120 Degree C
• Shaft Sealing: Mechanical Seals / Gland Packing
• Capacity up to: Cast Iron, Carbon Steel,  SS316, SS304, Bronze

• Power: 1 To 15
• Pressure: High Pressure
• Brand Name: RUHI
• Usage/Application: Agriculture
• Capacity: 1 to 25 HP
• Pump Type: Centrifugal
• Model Name/Number: ASSP
• Installation Type: Freestanding
• Motor Type: AC
• Body Material: SS
• Controller: VFD

Located in Uttar Pradesh, India, we are actively functioning as a proficient Manufacturer and Supplier of Industrial Pumps all over the nation. The Industrial Pumps that we deal in are fabricated making use of top-notch metal that has excellent resistance against corrosion. Offered by us in a number of specifications, our Industrial Pumps are comprehensively in demand. You can place even the bulk orders of Industrial Pumps with us.

• Material: Carbon/Ceramic
• Enclosure: Ip 54 (sealed, Weatherproof)
• Wetted Material: Stainless Steel (aisi 316), Pom, Rubber, Cable Drinking Water Approved
• Solar Operation: Integrated Mppt (maximum Power Point Tracking)
• Battery Operation: Low Voltage Disconnect and Restart After Battery Has Recovered
• Enclosure: ip 54 (sealed, Weatherproof)
• Lift Up To: 240m
• Flow Rate Up to: 21 M3/h
• Stator: Geometry Made of Abrasion Resistant Rubber
• Rotor: Stainless Steel, Hard Chrome Plated, Abrasion Resistant

Our range of Stainless Steel Centrifugal Pump is designed as per international quality standards. These offer hygienic processing essential for industries like Food, Pharmaceutical, Cosmetic, Breweries and in the Dairy Industries. The motor pumps facilitate draining the leakages if occurred, through packing arranged for minimal friction and pe rfect sealing. Due to their extending SS Shaft design, the motors can be replaced without assembling or disassembling to utilize time.

Used for Irrigation,Injection,Spray and other water supply schemes. These pumps are made to customers specifications and can be given in all materials.

• Type: Centrifugal Pumps
• Certification: CE, ISO 9001:2008 Certified
• Weight: 100-150kg, 150-200kg, 200-250kg, 250-300kg, 50-100kg
• Color: Brown, Grey, Light White, Blue
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Operating Type: Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric
• Warranty: 1year, 2years

Almatec ® E-Series double diaphragm pumps offer many advantages over the discontinued A-Series. The advantages include: Increased Capacity Decreased Air Consumption Reduced Noise Level Optimised Flow Pattern In addition to the advantages listed above E-Series pumps are available constructed from virgin Polyethylene. Trials based on the sand-slurry method have shown that the abrasion resistance of Polyethylene is 7 times higher than Polypropylene and 1.6 times higher than steel. This high resistance to abrasion makes it the ideal pump for many applications such as pickling baths in the electroplating industry, printing inks, lime slurry, and ceramic mass and glaze in the ceramics industry to name a few. Almatec® also offers conductive plastic E-series pumps. The housings and internals of the conductive version are made of PE or PTFE filled with conductive pigment which always remains below the limits set by the FDA. The pump can be grounded via a connection on the centre housing the eliminating the risk of electrostatic discharge. Conductive pumps in the E-Series are ATEX certified

• Brand: Hamraj
• Material: Mild Steel
• Capacity: 800 LPM
• Working Temperature: 200 degree C

• Frequency: 50 / 60 Hz
• Material: Stainless Steel
• Voltage: 240 V
• Power Source: Electric
• Use: Transfer of liquids and viscose products
• Material Grade: SS 304

• Application: Industrial
• Seal Material: PTFE, UHMW-PE
• Material of Construction: Carbon Steel, Stainless Steel
• Pressure Ratio: Max. 1001
• Max Discharge Pressure: Upto 400 bar
• Flow Rates: Upto 110 Ltr/min

• Type: Domestic Water Pumps
• Voltage: 220V, 380V, 440V
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Application: Water Pumps
• Application: Industry
• Automatic Grade: Automatic, Manual, Semi Automatic
• Warrenty: 1 Year, 2 Years

• Max Flow Rate: 0 - 3500 Rpm
• Pressure: High Pressure
• Voltage: 208- 230 V
• Frequency: 60 Hz
• Power Source: Electric
• No Of Phase: Three

Foggers India offers you LOC Handy Fogging Machine To manage mosquitoes the way you want to. And you can do it yourself, It helps you manage Mosquito menace, LOC Handy Fogging Machine is most effective for small areas like poultry farmers, bungalows, party lawns housing societies, farm houses schools, etc.   Covers small areas effectively   Weight just 1.5 kg   Use LP-Gas as burner fuel.   Noiseless operation.   Reliable hand pump for fog output   Nation wide sales and service   Patented Coil cleaning system.

• Impeller size: 135 MM

DESCRIPTION: It is a Transfer Pump it intake the liquid from one hand and develop the pressure and out through the liquid with pressure from the other hand. The pump is made up of stainless steel.

• Material: Stainless Steel

These incorporates a simple non return valve encased in aluminium alloy jet head which opens to direct flow of water jet and closes when the suction starts. This is designed for rapid penetration by jetting.This contains 1.5 inch i.d. galvanized inner pipe, with hardened cutting teeth to penetrate even tough soil and a ball valve on front for jetting is tightly threaded onto a filter screen pipe.

It is a transfer pump it intake the liquid from one hand and develop the pressure and out through the liquid with pressure from the other hand. The pump is made up of stainless steel.

India mark II complete hand pump set . our product has passed all quality checks and our company is an ISO certified company.

Force Lift Hand Pump, hand pumps, Deep Well Hand Pump

Diesel Pump

foot operated pump, hand pumps, Eot Crane, portable guard room

well point equipment, Centrifugal Pumps, Dewatering Pumps, Pumps