KM Worldwide Private Limited Swarn Jyanti Puram, Ghaziabad, Uttar Pradesh

210 Shredded scrap. Homogeneous iron and steel scrap, magnetically separated, originating from automobiles, unprepared No. 1 and No. 2 steel, miscellaneous baling and sheet scrap. Average density 50 pounds per cubic foot. 211 Shredded scrap. Homogeneous iron and steel scrap magnetically separated, originating from automobiles, unprepared No. 1 and No. 2 steel, miscellaneous baling and sheet scrap. Average density 70 pounds per cubic foot.

ISRI Code 231: Cut structural and plate scrap, 5 feet and under. Clean open hearth steel plates, structural shapes, crop ends, shearings, or broken steel tires. Dimensions not less than 1/4 inch thickness, not over 5 feet in length and 18 inches in width. Phosphorus or sulphur not over 0.05 percent. ISRI Code 232: Cut structural and plate scrap, 5 feet and under. Clean open hearth steel plates, structural shapes, crop ends, shearings, or broken steel tires. Dimensions not less than 1/4 inch thickness, not over 5 feet in length and 24 inches in width. Phosphorus or sulphur not over 0.05 percent.

Clean steel or wrought iron turnings, drillings, or screw cuttings. May include any such material whether resulting from crushing, raking, or other processes. Free of springy, bushy, iron borings, tangled or matted material, lumps, iron borings, nonferrous metals in a free state, grindings, or excessive oil and may not include badly rusted or corroded stock.

No. 1 bundles- New black steel sheet scrap, clippings or skeleton scrap, compressed or hand bundled, to charging box size, and weighing not less than 75 pounds per cubic foot. (Hand bundles are tightly secured for handling with a magnet.) May include Stanley balls or mandrel wound bundles or skeleton reels, tightly secured. May include chemically detained material. May not include old auto body or fender stock. Free of metal coated, limed, vitreous enameled, and electrical sheet containing over 0.5 percent silicon. No. 2 bundles-Old black and galvanized steel sheet scrap, hydraulically compressed to charging box size and weighing not less than 75 pounds per cubic foot. May not include tin or lead-coated material or vitreous enameled material.

Heavy melting steel (HMS) or heavy melting scrap is a designation for recyclable steel and wrought iron. It is broken up into two major categories: HMS 1 and HMS 2, where HMS 1 does not contain galvanized and blackened steel, whereas HMS 2 does. The Institute of Scrap Recycling Industries breaks up the categories further ISRI 200 (HMS 1): Wrought iron or steel scrap  1⁄4 inch and larger in thickness. All pieces must be smaller than 60×24 inches. Total of all goods sold by the seller will also be totally free from any types of radiation, bombs, arms and ammunition, mines, shell, cartridges, sealed containers, gas cylinders, explosive shells or explosive materials in any form either used or otherwise as per the specification below: ISRI 201 (HMS 1): Same as ISRI 200 except pieces must be smaller than 36×18 in.

scrap consists out of a mix of mill scrap (stampings, cuttings, bars, etc.), industrial scrap (nuts, bolts, misc. Pieces, etc), auto and truck frames and bodies, railroad scrap (wheels, axles, parts of locomotives and carriages, etc.), ship scrap (fittings, plate pieces, parts), construction scrap (plate, bars, angle pieces, rods, steel pipe, etc.), and miscellaneous commercial scrap (appliance casings, frames and parts, etc.). total of all goods sold by the seller will also be totally free from any types of radiation, bombs, arms and ammunition, mines, shell, cartridges, sealed containers, gas cylinders, explosive shells or explosive materials in any form either used or otherwise as per the specification below: hms 1 – isri code 200: heavy melting steel. Wrought iron and/or steel scrap • inch or steel scrap • inch and over in thickness. Individual pieces not over 60 x 24 inches (charging box size) prepared in a manner to insure compact charging. hms 1 – isri code 201: heavy melting steel 3 feet x 18 inches. Wrought iron or steel scrap • inch over in thickness individual pieces not over 36 inches x 18 inches (charging box size) prepared in a manner to insure compact charging. hms 1 – isri code 202: haavy melting steel 5 feet x 18 inches. Wrought iron or steel scrap • inch and over in thickness individual pieces not over 60 inches x 18 inches (charging box size) prepared in a manner to insure compact charging. hms 2 – isri code 203: heavy melting steel wrought iron or steel scrap, black and galvanized, 1/8 inch and over in thickness, charging box size to include material not suitable as no.1 heavy melting steel prepared in a manner to ensure compact charging. hms 2 – isri code 204: same as isri 203 but max size 36 x 18 inches. hms 2 – isri code 205: same as isri 204 but free of sheet iron or thin-gauged material. hms 2 – isri code 206: same as isri 204, but max size 60 x 18 inches.

Type : Hms Scraps

Composition : Ferrous Steel Scrap

berry no- 1 copper wire shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than no. 16 b & s wire gauge, free of burnt wire which is brittle. Hydraulically briquetted copper subject to agreement. candy no -1 heavy copper shall consist of clean, unalloyed, uncoated copper clippings, punching, bus bars, commutator segments, and wire not less than 1/16 of an inch thick, free of burnt wire which is brittle; but may include clean copper tubing. Hydraulically briquetted copper subject to agreement. birch cliff no- 2 copper shall consist of miscellaneous, unalloyed copper scrap having a nominal 96% copper content (minimum 94%) as determined by electrolytic assay. Should be free of the following: excessively leaded, tinned, soldered copper scrap; brasses and bronzes; excessive oil content, iron and non-metallic; copper tubing with other than copper connections or with sediment; copper wire from burning, containing insulation; hair wire; burnt wire which is brittle; and should be reasonably free of ash. Hydraulically briquetted copper subject to agreement. clove no.-1 copper wire nodules shall consist of no. 1 bare, uncoated, unalloyed copper wire scrap nodules, chopped or shredded, free of tin, lead, zinc, aluminum, iron, other metallic impurities

honey- yellow brass scrap shall consist of mixed yellow brass solids, including brass castings, rolled brass, rod brass, tubing and miscellaneous yellow brasses, including plated brass. Must be free of manganese-bronze, aluminumbronze, unsweated radiators or radiator parts, iron, and excessively dirty and corroded materials. Must also be free of any type of munitions including, but not limited to, bullet casings. ivory- yellow brass castings shall consist of yellow brass castings in crucible shape, no piece to measure more than 12 inches over any one part; and shall be free of brass forgings, silicon bronze, aluminum bronze and manganese bronze, and not to contain more than 15% nickel plated material. label- new brass clippings shall consist of the cuttings of new unleaded yellow brass sheet or plate, to be clean and free from foreign substances and not to contain more than 10% of clean brass punchings under 1 /4 inch. To be free of muntz metal and naval brass. lace- brass shell cases without primers shall consist of clean fired 70/30 brass shell cases free of primers and any other foreign material. For material to be exported from the united states, all shells must be sufficiently mutilated to prevent reuse and reloading.

tense- mixed aluminum castings shall consist of all clean aluminum castings which may contain auto and airplane castings but no ingots, and to be free of iron, brass, dirt and other non-metallic items. Oil and grease not to total more than 2%. taint/ tabor- clean mixed old alloy sheet aluminum tabor shall consist of clean old alloy aluminum sheet of two or more alloys, free of foil, venetian blinds, castings, hair wire, screen wire, food or beverage containers, radiator shells, airplane sheet, bottle caps, plastic, dirt, and other non-metallic items. Oil and grease not to total more than 1%. Up to 10% tale permitted. talk- aluminum copper radiators shall consist of clean aluminum and copper radiators, and/or aluminum fins on copper tubing, free of brass tubing, iron and other foreign contamination.

Type : Aluminium Scrap

Application : Industrial Use, Recycling