Material Testing Equipment Dealers in Ghaziabad

• Power Source: Electrical
• Voltage: 210-240V
• Features: The apparatus is finished in bright chrome/ zinc plating and NC based painting for a corrosion resistance finish
• Flexing Frequency: 140 + 10 cycles/minute
• Max Flexing Shoe: 35 to 45 Degree
• Eccentricity: 80 mm
• Phase Type: Single Phase

• Conforms to JIS B 7728:2002: For compression and tension

There is a Japanese standard JIS B 7721 "Tensioncompression testing machines - Verification and calibration of the force-measuring system" as a standard to calibrate compression or tension testing machines. The force measuring system used for the calibration is this load cell. The load cell has to be calibrated in accordance with Japanese standard JIS B 7728 "Calibration of force-proving instruments used for the verification of uniaxial testing machines". The load cell conforms to JIS B 7728 and meets its requirement in accuracy, and has rod end and bearing plate as loading jigs. The load cell is produced according to the capacity. accuracy class and shape of a testing machine for calibration.

• Power Supply: 220V, 50Hz,1 Phase
• Weight: 2100 Kg
• Usage/Application: Testing Material Upto 3000KN
• Max. Load: 3000 KN
• Piston Moving Speed: 0-60mm/min
• Distance Between two platens: 360 mm
• Columns effective Intervals: 400*320 mm
• Dimension of oil source cabinet: 700x540x1500mm
• Accuracy of testing force: +-1% of Indicated Value
• Upper Compressin dia.: 300 mm
• Piston stroke: 200 mm
• Dimension: 700x580x1650mm
• Load Resolution: 0.01 KN
• Frame Structure: 4 Coumns Frame

• Brand Name: BANBROS
• Sensor(Material): Diamond
• Filter Profile(Filter Profile): RC , PC-RC ,gauss
• Filter Profile(Non Filter Profile): D-P
• Resolution: 0.001Micron Mtr Measured Value less than 10 MicronMtr
• Power Supply: Built-in lithium battery
• Measuring Range: Ra 0.005 to 16 MicronMtr Rq 0.020 to 629.9 Uinch Rz 0.020 to 160MicronMtr Rt 0.078 to 6299 Uinch
• Operating Conditions: Temp. 0 to 50degre , Humidity Less 80%
• Dimension: 140x52x48 mm
• Accuracy: Within + - 10%
• Indication of variation: Within 6%
• Sensor:(Test Principle): Inductance type
• Sensor(Testing Force): 4 MN
• Parameters: Ra, Rz,Rq,Rt
• Sensor(Longitudinal Radius): 48 mm
• Sensor(Angle): 90 degre
• Sensor(Radius): 5 Micron Mtr
• Sensor(Max Driving Travel): 17.5mm/0.7inch
• Sensor(Sampling Length): 0.25mm, 0.8mm, 2.5mm optional
• Valued Length: 1 to 5L optional
• Driver Speed(Measuring): Sampling Lenth 2.5 mm VT 1 m/s
• Driver Speed(Returning): Vt=1mm/s

• Parameter: HRC, HB, etc
• Display Type: Digital
• Brand Name: Globe Tex
• Packaging Type: Wooden Box
• Country of Origin: Made in India
• Automation Grade: Automatic
• Weight: 160 Kg
• Finish: Color Coated
• Needle Stroke: 2.5 mm

The GLOBE Flexometer is built on a rigid metallic base plate. Test specimens are held between a pair of stationary and oscillating grips. The grips are specially designed to enable quick fixing and removal of test specimens and are shaped to meet the specification of the test. Motion to the oscillating grips is given through a link mechanism, which oscillates the shaft on which the grips are mounted. All the pivot points of the mechanism have ball bearings to ensure smooth operation and a long working life. The link mechanism is give motion from an electric motor and two sets of V-pulleys. A six-digit electronic counter with key-reset and backup memory is provided to record the total number of flexing cycles undergone by the test specimens. The apparatus is finished in bright chrome / zinc plating and shore blue matalic painting to give it a corrosion resistant finish. The standard model of flexometer can test upto six specimens at one time. Special models capable of testing either twelve or twenty-four test specimens at one time can also be offered against specific requirements. Specimen cutting die and cutting press are also available as optional accessories.

• Voltage: 220 V
• Frequency: 50 Hz
• Display: Digital Display
• Accuracy: 5 %
• Usage/Application: Laboratory
• Material: Stainless Steel
• Automation Type: Semi Automatic
• Output Resistance: 1 Kilo Ohms

DESTRUCTIVE MATERIAL TESTING MACHINES, CNC Machines, Spline Milling Machine

Flexometer, Toxicity Analyzer, MS Transparency Tester

Flexometer, Hot Air Oven, Wrap Reel, Conditioning Chamber

ndt equipment, ndt consultancy services

Cold Footwear Flexometer, Electrical Resistance Tester, air flow tester