Mlhl Ltd Naya Ganj, Ghaziabad, Uttar Pradesh

These wires are shaped wires in Square, Rectangular or Trapezoidal section manufactured from High Carbon steel generally conforming to EN 42 B/EN42 J/ 60-.80 C grade.The wires are custom built for the taper required. PACKING: The spring washer wire are supplied in coils of 450/500 mm ID with coil weight of 40 to 150 Kgs depending on the sizes. The weight can be adujusted to meet specific customer’s requirement.   The wires are oiled anr packed with polythene and hessian We specialize in supplying Spring washer wires to customer’s actual needs.

Application : Used in manufacturing of Springs, Spring washers and snap rings.

PATENTED AND COLD DRAWN STEEL WIRES-UNALLOYED: These wires are cold drawn made from unalloyed high carbon steel. APPLICATION :  Used in manufacturing of cold-formed helical springs, spring rings and wires forms which find application in automobile, cycle and other industrial equipments. The wire are generally supplied in Phosphated drawn with or without anti rust oil coating or as desired by the customer.   PACKING : The wire is packed with Polythene and Hessian/HDPE or as per customer’s need. We specialize in supplying Cable Armouring wires to customer’s actual needs.

These wires are High Carbon Annealed Bright drawn wires. PACKING : The finished drawn wires are dipped in rust preventive oil, securely bound at four places and wrapped with Polethene and Hessian/HDPE.We specialize in supplying needle wires to customer’s actual needs.

These wires are shaped wires manufactured from Low Carbon steel/ High Carbon steel as per customer’s specific requirement in flat, Half round and triangular shapes. The Profile wires can be adjusted to meet customer’s actual needs. The wires can be supplied in annealed and drawn finish. PACKING: The profile wire is generally supplied in 450/500 ID Coils in coil weight of 40 to 120 kgs. In specific case for small cross section of wires, it can be reduced to 30 kgs. The coil weight can be controlled to meet specific customers requirements. The coils are packed with Polythene & Hessian and oiling is done wherever specified by customer. We specialize in supplying Bearing wires to customer’s actual needs. For all your requirements, kindly contact any of our following offices along with complete technical specification desired.

The High Tensile Galvanized steel wire may be supplied as single wire or in seven wire strand. These wires are used for Mechanical reinforcement in the manufacturing of Aluminium Conductors, steel reinforced (ACSR). Used in over head transmission line as primary and secondary distribution conductors.

These wires are patented Galvanized drawn wires, manufactured from High Carbon Steel. APPLICATION :  Used in manufacturing of auto-cables, steel wire Ropes, cold-formed helical spring and wire forms.   SIZE RANGE : Min. 0.30 MM, Max. 2.85 MM   SPECIFICATIONS : We supply these wires as per IS 4454 (PART-1), Gr. II & I and IS 1835 or as per customer’s requirements according to their actual needs.   PACKING : Galvanized Spring steel wires are normally packed with Polythene/Polythene & hessian cloth. We specialize in supplying Cable Armouring wires to customer’s actual needs

These are Mild Steel Galvanized wires used for general engineering purpose.   APPLICATION :  Used in manufacturing Wire netting, Wire mesh, Fencing, Barbing, Agriculture, Irrigation, Prevention of soil erosion, as well as other general applications.   SIZE RANGE : Min. 0.90 MM,Max. 5.00 MM   PACKING : The coils are normally supplied in unoiled condition with Polythene & Hessian/ HDPE or as per customer’s requirement. We specialize in supplying Cable Armouring wires to customer’s actual needs

Country of Origin : India

Certification : ISI Certified

Wire Material : Mild Steel Galvanized

Technique : Welded Mesh

Voltage Range : 220V

Shape : Twisted

APPLICATION:  Used with thin and uniform coating for continuous welding on unalloyed and structural steel.   PRODUCT CHARACTERISTICS:  Brand : BHARAT MAG * BHARAT MAG wires is double Deoxidized. Mn-Si Alloy wire. It gives good electrical contact and protection against weathering, corrosion due to light , uniform, bright, smooth copper coating produced over the surface of the wire by a special process. It gives spatter free welding with CO2 gas and Argon-Carbn dioxide gas mixture. Product is supplied with controlled tensile strength of the wire and helix to ensure resistance free continuous wire feeding.

These wires are shaped wires in Square; rectangular section manufactured from High Carbon steel generally conforming to EN 42 C/EN42 J/.75-.85 C grade.The wires are custom built to suit customers actual requirement. These wire are normally supplied as Annealed finish wires. PACKING: The circlip wire are supplied in coils of 450/500 mm ID with coil weight of 40 to 150 Kgs depending on the sizes. The weight can be adjusted to meet specific customer’s requirement. The wires are oiled and packed with polythene and hessian.We specialize in supplying Cable Armouring wires to customer’s actual needs.

Application : Used in manufacturing of lock circlip used for locking shafts

These are Galvanized Mild steel wires in round and formed sections used for armouring of all grades of electric cables. These wires prevent the cable from getting damaged during digging, provide strength to the cables and some times used as earth wire.   APPLICATION :  Used in armouring of land cables.   SIZE RANGE : Round Wire: Min. 0.90 MM , Max. 4.00 MM Formed Wire: 4.0 x 0.8 MM, 6.10 x 1.4 MM   PACKING : The coils are normally supplied in unoiled condition with Polythene & Hessian/ HDPE or as per customer’s requirement. We specialize in supplying Cable Armouring wires to customer’s actual needs.

These wires are supplied in coils with Phosphated coating to facilitate cold heading operation. SPECIFICATIONS : Grade EN31 / SAE 52100 (Carbon 0.98 – 1.10 % and Chromium 1.30 – 1.60%).Microstructure: Uniformly distributed fine carbide globules in ferrite matrix i.e. Spherodized annealed. All properties like Hardness, Tensile strength, Size tolerance, coil weight etc. are maintained as per customer’s specification.

The High Tensile Galvanized steel wire may be supplied as single wire or in seven wire strand. These wires are used for Mechanical reinforcement in the manufacturing of Aluminium Conductors, steel reinforced (ACSR). APPLICATION :  Used in over head transmission line as primary and secondary distribution conductors.   SIZE RANGE : Single wire Min. 1.50 MM, Max. 4.77 MM Strand wire Min. 7 x 1.50 MM, Max. 7 x 4.77 MM   PACKING : The single ACSR wires are tied securely around the coil at four places. The wires are packed with LDPE film & hessian or HDPE fabrics. The stranded wires are supplied as are coil or in wooden reels.  More than one single length may be supplied in one reel. The galvanized stranded wire may be coated with boiled linseed oil or grease according to contract in order to prevent rust formation.  We specialize in supplying core wires to customer’s actual need. These above details are subject to revision.

We are leading supplier of huge range of ACSR Core Wire.

We deals in supplying of wide range of Armoured Cables.

A prominent supplier of huge range of Galvanized Iron Wire.

We are leading supplier of huge range of Earthing Wire.

We deals in supplying of wide range of Barbed Wire.

The wire ropes, which we supply, are known for their sturdy construction. Wire ropes are manufactured using un-galvanized and galvanized stainless steel. The size of wire ropes varies from 1 mm to 100 mm. Buyers can avail the ropes at discounted market prices.

A prominent supplier of huge range of HBB Wire.

We are leading supplier of huge range of Cycle Spoke Wires.

We deals in supplying of wide range of High Carbon Wires.

We are well known for supplying of wide variety of Mild Steel Wire.

A prominent supplier of huge range of Ball Bearing Wire.

We are leading supplier of huge range of Annealed Wires.