Nitrogen Plants Dealers in Ghaziabad

• Type: PSA NITROGEN PLANT
• Application: Industrial Use
• Color: Grey-silver
• Voltage: 0-380V
• Country of Origin: India
• Power Source: Electric
• Temperature Range: 0-40 Deg C
• Installation Type: Installation
• Phase: Three Phase
• Water Source: Industrial Wastewater
• Automation Grade: Automatic, Semi-automatic

• Driven Type: Electric
• Condition: New
• Automatic Grade: Automatic
• Power: 9-12kw
• Type: Psa Nitrogen Gas Plant

• Features: Nitrogen generators are efficient in continuous nitrogen supply

Nitrogen Plant With Booster is provided, if the requirement at the discharge is at higher pressure. Normally our PSA system can provide pressure at discharge to about 6 kgcm2 g. but it can be increase up to higher pressure of 10-150 kgcm2 g based on client's requirement. for this we need additional booster,suction pot and finned cooler after the surge vessel so as to enhanced the pressure up to higher pressure before storage tank. Rest of the principle is same as ms model.

 The output of liquid oxygen can be stored in a liquid oxygen tank. Liquid Nitrogen can be available as a by product simultaneously  upto 99.999% (PPM GRADE) purity. The plant is extremely versatile and all the possible product variants are possible you can either  take 100% Liquid oxygen out put or 50% Liquid oxygen output directly into cylinders or 50% Liquid oxygen and 50% Liquid nitrogen. MANUFACTURING PROCESS 1. COMPRESSION OF ATMOSPHERIC AIR BY AIR COMPRESSOR The free saturated air is sucked from atmosphere through a highly efficient dry-type suction filter into the first stage of the horizontal balanced opposed, lubricated reciprocating air compressor. Compresssed air is chilled to 12 degree centigrade in a chilling unit ata temperature of 12 degree centigrade to a moisture separator where the condensed moisture gets removed before entering into Molecular Sieve Battery. Before sending the air to MOLECULAR SIEVE BATTERY, air is passed through an OIL ABSORBER where air becomes oil free. 2. PURIFICATION OF AIR BY PROCESS SKID Chilled air passes through the Molecular Sieve Battery consisting of Twin Tower packed with Molecular Sieves to remove moisture and Carbon dioxide present in the air. Molecular Sieve Battery operates on Twin Tower System, when one tower is under production the other tower is regenerated by passing waste Nitrogen gas at 200 degC through a reactivation heater. After interval of 8 to 10 hours, the tower under production gets exhausted and regenerated by similar process before use and thus the cycle continues. Any dust particles gets filtered in the DUST FILTER before air enters the AIR SEPARATION COLUMN. 3. COOLING OF AIR BY EXPANSION ENGINE (EXPANDER) The process air before liquefication in the air separation unit needs to be cooled to temperatures sub-zero (cryogenic). The main portion of the air after the process skid enters the expansion engine through the heat exchanger no. I after pre-cooling. The temperature of the air drops to around -165degC by the Expander which is a very highly efficient advanced design with Teflon piston rings and completely hydraulic mechanism with leakproof ball valves.4. SEPARATION IF LIQUID AIR INTO OXYGEN AND NITROGEN BY AIR SEPARATION COLUMN Chilled, Oil free and moisture free air enters into multi-pass HEAT EXCHANGER NO.I where it gets cooled to (-80) degC by cold gained from outgoing waste Nitrogen and Oxygen. A part of air this enters a multi-pass HEAT EXCHANGER NO. II or LIQUIFIER made of special Alloy tubes. This air cools to (-170) degC before passing through an expansion valve. Due to joule Thompson Effect, after the expansion valve. Due to joule Thompson Effect, after the expansion valve, air gets further cooled down and gets liquified before entering into bottom column is known as rich liquid. The rich liquid in the bottom column enters into feed tray of top column enters into feed tray of top column. Similarly the liquid nitrogen called POOR LIQUID enters into top column as a reflux & it takes away the latest heat of condensing Oxygen and gets vapourised whereas the liquid Oxygen flows down the trays of the top column into the Condenser passes through a Sub-Cooler to a LO Pump. 5. WITHDRAWAL LIQUID OXYGEN AND STORAGE IN STORAGE TANK The final product from a liquid Oxygen/Nitrogen goes to the storage tank.  

With the help of our technical team of experts, we are involved in offering a wide range of lab scale nitrogen gas plant. These plants ensures to provide continuous nitrogen supply in an efficient manner.

In these, in-house plants, Nitrogen gas is produced from atmospheric air and separated by PSA Technology.Nitrogen Purity:From this gas plant Nitrogen can be produced with 99.9% to 99.9999% Purity and Dryness (Dew point) of gas with (-) 40°C to (-) 80°C.Economics:The Gas generation cost is very low including all utilities like, power, cooling water etc.Capacity:From 1 to 500 NM³ / Hr. are available.Applications:Suitable for Synthetic Fiber Industries, Gas, Petrogas, Soft Ferrite, Fertilizer, Pharmaceuticals, Heat Treatment Furnaces, Electronic, Food Industries and Coal mines for controlling fire.

• Condition: New Only
• Type Of Plant: Our organization is backed by rich industry experience of more than 11 years in distributing, supply
• Automation Grade: Semi- Automatic
• Design: Standard
• Model Name: Our organization is backed by rich industry experience of more than 11 years in distributing, supply

Psa Nitrogen Plant, Dryers, process filters, p s a nitrogen gas plants

nitrogen gas plant, Ammonia Cracker, ammonia crackers, hydrogen gas plant

nitrogen plants, air ozone purifier, air quality management systems, Oxygen

nitrogen plants, gas plants, acetylene plants, oxygen plants