Process Control Equipment Dealers in Mohan Nagar, Ghaziabad

• Pressure: High Pressure
• Warranty: 2 Years
• Condition: New
• Brand Name: RUHI
• Usage/Application: Agriculture
• Power Source: Solar
• MNRE Approved: Yes

NO BATTERY NO STARTER USE EXISTING AC MOTORS 20 YEARS LIFE 10 YEARS PV WARRANTY 2YEARS CONTROLLER WARRANTY . ONE TIME INVESTMENT AUTO/MANUAL OPERATION RANGE: 1HP to 50HP This system works at its best during any time of the day at any kind of sunlight. The induction motor has very high starting current which is around four times of the running current of the motor. The VFD in controller eliminates the high starting current of the induction motor. Because of the smooth start using VFD, the motor will start as early as even 9am and works till 5:30pm. It delivers maximum water during 10am to 4pm.

Raw materials form the basis of any product and thus we obtain them after checking against varied quality parameters. Moreover, we procure raw materials only from reliable sources. We have carved a dignified position in the market owing to our on-time and safe delivery of the orders.

We cater to the growing needs of a large number of industrial establishments by providing them an advanced range of Motion Control Systems. The Motion Control Systems have gained us huge accolades owing to their superior features and market leading prices. These Motion Control Systems have long service life and versatile usage. Applications ProcessingFood preparationPackagingPrintingRobotic assembly

• RANGE & TYPE: 0 - 600 oC (J Type), 0 - 1200 oC (K Type), 0 - 400 oC (PT-100 Type)
• CONTROLACTION: Time proportionating ON/OFF Control.
• SENSOR INPUT: J Type, K Type, PT-100 Type. (Factory Setting)
• TCB: Thermocouple Break.
• MODEL: GTC-09, GTC-07
• POWER SUPPLY: 85V AC to 265V AC ±10%, 50 Hz.
• OUT PUT: Relay Output - 1C/O, 7Amp.
• DISPLAY & SETTING: 7 Segment LED Display. & By POT Knob on front.
• SIZE & MOUNTING: 96x96x110/ 72x72x110mm. & Panel Mounted.

Resistance Temperature Detector(RTD) used for temperature measurement -50 to 400 Deg.C. The system accuracy begins with proper primary sensor selection. Various considerations apply to the design of RTD assemblies. The element should be protected from shock and vibration, yet free of expansion stresses that may shift the reading. The element assembly needs to be isolated without obstructing heat flow. The outer sheath has to withstand pressure, erosion and vibration, yet it should be small enough for easy installation and rapid response to temperature changes.

Temperature measuring point : Pick shell / insulation / dew point. Thread : 4/1, 5/16, M8, M6, M12. Temperature range : -50°C~950°C. K Type Thermocouple is the most common type of thermocouple. It is reliable, inexpensive, and accurate and its temperature range is wide. It is mostly used in nuclear applications due to the relative radiation hardness. The maximum temperature (continuous) is nearly 1,100°C. These types of thermocouples are used widely in the industry. They have very good resistance to oxidation and high thermopower. They provide us with correct temperature monitoring in the range between  -200°C and  1370°C (-328°F to 2498°F). They consist of nickel-5% aluminum and silicon (-) wire vs. nickel-10% chromium (+) wire. One should use this kind of thermocouple in oxidizing or inert atmospheres. The heating element like electric heaters is the best source to heat it up. They are mostly used at temperatures over 540°C (1004°F) because of the higher oxidation resistance as compared to J, T or E types of thermocouples. The range of K Type Thermocouple : Extension wire –   Between 32° F and 392° F (0°C to 200°C) Thermocouple grade wire – Between 454° F and 2,300° F (–270°C to     1260°C) Accuracy (which will be greater) :Special Limits of Error       –                 +/- 1.1C or 0.4% Standard                             –                  +/- 2.2C or +/- .75% Names of Elements : For describing the positive element of this type of thermocouple (KP), following names can be used: ThermoKanthal-KPs, HAI-KP1, Tophel+, Nickel-chrome, Chromel2, and T-13. The negative element of this type of thermocouple (KN), is described by these names: ThermoKanthal-KNs, HAI-KN1, T-2s, Nial+, Nickel-silicon, and Alumel2.   Cautions to Take: Some conditions should be avoided while using this type of K thermocouple. It should not be used in vacuum applications because of the vaporization of chromium in the positive element. Also, it is not supposed to be used in the sulphurous environment as both of the elements will corrode rapidly and eventually the negative element will fail mechanically because of being brittle. One should also avoid reducing atmospheres. The green-rot phenomenon can be caused due to low oxygen levels. In this phenomenon, chromium in elements will start oxidizing which cause very large negative drifts in calibration. Take a look here as well, actually, If you are a wholesaler then you can have direct contact to thermocouple manufacturers near your area for bulk order. Type K Thermocouples are specified at the time when metallurgy was not as advanced as it is nowadays. As a result, the characteristics can vary extensively between samples. Nickel which is the constituent metal of K type thermocouple is magnetic. Thermocouples made with magnetic material have a characteristic that they are subjected to a deviation in output whenever the Curie point is reached by the material. This happens with thermocouple type k at nearly 185 °C. Hope you like the content and him information given by us. If still have any query about the product or anything then don’t forget to contact us.  FEATURE:- Premium Quality. Affordable Reliable Product Details: Minimum Order Quantity: 6 PiecePower(Watts): As per requirement of applicationVoltage: As per requirement of applicationSize: As per requirement of application

• Display Type: LED
• Feature: Rust resistance
• Condition: New
• Frequency: 50/60 Hz
• Power Voltage: AC 85 V
• Usage: Laboratory
• Digit Display Size: Single Display
• Size: 160 x 80 mm
• Performance: Optimum
• Usage: Industrial
• Speciality: Long functional life
• Advantage: Easy to Operate

We have reliable, legal, and secure payment procedures through which clients can make purchases. We maintain a high level of transparency and ensure to maintain proper documentation. We make us of only experts' certified packaging material to meet the personalized and standard packaging requirements of the clients. Rest assured us for the packaging of the products. Specifications : Usage - To control temperature Condition - New Features : Excellent performance Easy to use Moisture proof

We are offering industrial thermocouple sensors, all types of industrial heaters, and all types of candy , masala pouch packing, ffs machine list given below as: 1.all types of perforation bladesknivescutters. 2.all types of zig zag cuttersknivesblades. 3.all types of industrial heaters such as pencil heaters, round heaters,casting heaters,strip heaters and high density heaters. 4.all types of sealers jaws of candy machine and biscuits and ffs machines. 5. All types of thermocople temperature sensor such k-type sensor t-type thermocople sensor and pt 100 sensors etc. -- thanks & regards, subodh mishra (head-marketing & sales) pack machine engineers, (spl. In: all types of pouch cutters, perforation blades, pillow pack zig zag cutters, sealing jaws, high density pencil heaters, solid state relay (s.s.r.), band,mica,band,nozzle, and strip heaters ).

Pressure Gauges, Temperature Gauges, Differential Pressure Gauge

• Application: Controls Water Level
• Weight: 10-20kg, 20-30kg, 30-40kg, 40-50kg
• Voltage: 110V, 220V
• Condition: New
• Display Type: Digital
• Automatic Grade: Automatic
• Power: 1-3kw, 3-6kw
• Driven Type: Electric
• Country of Origin: India

Details Suitable  for Community Users Suitable for Regular Consumers Can make payments using E- Wallet Debit Money from RFID-Card Single Channel Water Vending Flow Sensor Dispensing 3 Different quantity Choice Buttons Can be Operate From AC 230/12 v DC  or  24v DC Highly Value for Money Highly Accurate Quantity Highly Reliable

Thermocouple leads being used for accurate temp. measuring and controls. The wires may be designed and manufactured as per customers specific requirements.

• Display Type: Digital
• Accuracy: +/- 0.5 Deg C
• Model No.: PT-100
• Controller Function Type: On-Off
• Display: 4 digits
• Measurements: 35 x 77 x 71 mm

siemens products, ABB Products, Schneider Products

Single Phase Switch, Solar Charger, E-Rickshaw Solar Charger

Temperature Controllers, Packaging Machines, Coil Winding Machines

process control equipment

Plc, ac drive

Plc Control System, CONTROL PANEL WIRING, process automation services

process control instrument, load indicator

Programmable Logic Controller, Wireless P.I.R. Motion Sensor

process recorder, AH4000 Series, IR-RST Series Radiation Thermometers

K Type Thermocouples, stripe heater, Mica Heating Elements