Shakti Trading Corporation Bulandshahr Road Industrial Area, Ghaziabad, Uttar Pradesh

This is a water base primer paint meant for making a good bond between the wall and the paint, it acts as a mediator and forms a strong binding bond for a longer life of both the paint and the wall as well. How To Use : Clean and remove loose plaster dust using sand paper Add approximately 500 ml - 600 ml water to 1 Ltr. of santex White Primer Generally Single coat is sufficient for the walls. COVERING: 100 -110 Sq. Ft. / ltr. /Single Coat BENEFITS : It comes at a very reasonable price. It lowers the cost of paint by reducing the consumption of paint which is applied after this. Gives a strong bonding between the wall & the paint. Increases the life of the paint.

Santex Weatherproof Exterior Emulsion is a water based exterior paint specially formulated for places with extreme climatic conditions like high rainfall, humidity and heat. It works as a protective shield against ultra violent rays, fungus & algae growth which prevents peeling, cracking and blackening of the paint for years together.   How To Use :   Clean the surface thoroughly using a wire brush Surface imperfections such as holes and cracks are to be filled using santex Acrylic Wall Putty (White Cement Based Putty). In the case of freshly plastered surfaces only, make a base coat of white cement based putty & then apply one coat of white primer. When using santex Weatherproof Exterior Emulsion apply 2-3 coats by diluting I Kg. of santex Weatherproof Exterior Emulsion with 400-500 ml. of water. Keep an interval of 4-6 hours between two coats. Generally 2 to 3 coats are recommended for greater protection   Why To Choose :   Anti fungus and Anti algae. Anti fading and Anti Flaking. No curing required, it dries rapidly within 4-6 hours. It is economical because of extra covering and durability.   COVERING: 60-65 Sq. Ft./ Kg./ D ouble coat

Extra Covering With Titanium Rutile  Santexcem is a premium quality ISI Cement Paint which is manufactured as per the standards of IS:5410:1992 by using White cement, Pigments, Titanium Dioxide and Chemicals etc. Its formulation pertains to easy mixing., longer pot life with smooth brushability and extra durability and longer life of point. It gives a protective coating to the surface against moisture, salinity and organic growth. METHOD OF APPLICATION: Clean the surface thoroughly with wire/coir brush. Before applying the SANTEXCEM the surface should be wetted well with wate. Apply first coat on damp surface using good quality brush. Allow the surface to dry for 8 to 10 hours and then cure the surface with water. Similarly apply second coat as before the next day. After the application of second coat, cure the painted surface with water as directed sbove. Normally just two coats of SANTEXCEM are sufficient. UNIQUE FEATURES: Good weather resistance. Prevents Fungus & algae growth. More Durable. Latest International Technology. ISO 9001 Certified Product. Washable, Hygienic & ECO Friendly. COVERING : Sq. Ft. / Kg. / Double Coat Brick Work 40-50 Rendering Cement / Sand 30-40 In-situ concrete 50-60

Santex Unique Weatherproof Exterior & Interior Emulsion SANTEX UNIQUE Weatherpoof Exterior & Interior Emulsion is a touch 100% Pure acrylic polymer modified water based paint which can be applied on Exterior & Interior walls both. It is suitable for all tropical conditions like rainfall, heat and humidity. It gives the walls a very elegant and rich smooth finish with very showy bounding properties which prevent peeling and cracking of paint. Directions for use: Clean the surface thoroughly using wire brush. Surface imperfection such as hole and cracks to be filled using SANTEX acrylic all putty (white cement based putty). In case of freshly plastered surfaces only, apply oneself priming coat by mixing water and paint in the ratio of 1:1. When using SANTEX UNIQUE Weatherproof Exterior & Interior Emulsion apply 2 – 3 coats by diluting 1 Ltr. of SANTEX UNIQUE Weatherproof Exterior & Interior Emulsion with 400-500 ml. of water. Keep an interval of 4-6 hours between two coats. Generally 2 – 3 coats are recommended. For horizontal surfaces like windows, ledges etc. an additional coat is required for greater protection. The company will not be responsible for any wrong application. Benefits: Elegant, rich smooth finish. Higher covering. Suitable for all tropical conditions. It can be applied on Exterior as well as Interior walls. Covering: 100-130 Sq.Ft / Ltr. / Double coat.

Santex Super Plus+ Exterior Emulsion is a premium water based paint which can be used for exterior as well as interior surfaces. It gives a rich, smooth and elegant finish to the walls with a very good sheen. The finest raw materials used in the manufacturing of this product make it last for a longer duration of time. It protect the walls from algae growth, fungus attack, colour fading and flaking of paint. How To Use : Clean the surface thoroughly using a wire brush. Surface imperfections such as holes and cracks are to be filled using santex Acrylic Wall Putty (White Cement Based Putty). On new plastered surfaces make a base coat of white cement based putty & then apply a coat of white primer. Now apply 2-3 coat of santex Super Plus+ Exterior Emulsion by diluting 1 Ltr. of santex Super Plus+ Exterior Emulsion with 600-700 ml. of water. Keep an interval of 4-6 hours between two coats. Generally 2 to 3 coats are recommended for greater protection Why To Choose : Anti fungus and Anti algae. Anti fading and Anti Flaking. It is economical because of extra covering and durability. Rich, Smooth, Finish with good sheen. It can be wiped with clean water after 7 days to regain it's original beauty.

(Liquid Paste Putty) Santex Super Acrylic wall Putty is specially made for filling of dents, surface imperfections making base coat and leveling on primed wall/wooden surfaces prior to application of top coat finish in interiors. Directions: Remove all dust, flakes, cracks from walls by cleaning with emery paper/wire brush. Apply one coat of white primer (water thinnable) on wall. Apply with putty knife/blade Ist coat of super Acrylic Wall Putty as such or thinned suitably with water. Allow putty to dry for 6-8 hours. If required apply a second coat. Apply another coat of white primer water thinnable to seal the pores. The wall is now ready to be painted by any water base paint as finish coat. COVERING: 25 - 30 Sq. Ft. / Kg. / mm. BENEFITS : It gives a smooth finish to the wall It enhances the look of the paint because of good levelling.

Santex Optima All Weather Exterior & Interior Emulsion SANTEX Optima all weather exterior & interior emulsion is a high performance and highly advanced exterior & interior emulsion water based paint. It acts as a protective shield for exterior walls against algae, fungus, fading, flaking and safeguard them from adverse climatic conditions for years altogether. It gives an elegant and ultra smooth finish with excellent sheen to the wall making them shine bright when reflection of light comes on it. Directions for use: Clean the surface thoroughly using wire brush. Surface imperfection such as hole and cracks to be filled using SANTEX acrylic all putty (white cement based putty). In case of freshly plastered surfaces only, apply oneself priming coat by mixing water and paint in the ratio of 1:1. When using SANTEX Optima all weather exterior & interior emulsion apply 2 – 3 coats by diluting 1 Ltr. of SANTEX Optima all weather exterior & interior emulsion with 400-500 ml. of water. Keep an interval of 4-6 hours between two coats. Generally 2 – 3 coats are recommended. For horizontal surfaces like windows, ledges etc. an additional coat is required for greater protection. The company will not be responsible for any wrong application. Why to Choose: Rich, ultra smooth finish with excellent sheen. Ant fungus, Anti algae, Anti fading and Anti flaking. Superb covering and enhanced durability makes it economical for everyone. It can be wiped with clean water after 7 days to regain it’s original beauty. It can be applied on exterior as well as interior walls. Covering: 130-150 Sq. ft. / Ltr. / Double coat.

Santex Grout Unsanded Cement Based Tile Joint Filler SANTEX GROUT is a high quality, fine water - resistant, polymer-modified, cement-based powder GROUT designed for grouting glazed tiles mosaics, vitrified and fully vitrified tiles, ceramic tiles, industrial tiles etc. Instructions for use: Add 1 part of water to 3 parts of GROUT by weight and mix well to abstain a smooth and uniform paste. Fill the mixed material compactly without any breaks or gaps in to the tile joint using a squeeze. After the initial setting of the material (30 minutes), remove the excess material that may be present on the tile edges with a wet cloth or damp sponge. Performance: Addition of Santex Grout enhances adhesion to tile edges, water resistance and improves flexibility. Precautions: Filling of joint should be done 24 hours after tiles are fixed. Benefits: Water – Resistant – Both wall & Floor Tiles – Ready to use.

These are both solvent based paint products used on wooden, steel and iron surfaces. Primers works as a binding force between surface and the paint where as Enamel is used as a finish coat which gives a very uniform, smooth finish with excellent leveling and hard mirror like gloss to the surface. Directions: Clean the surface throughly with wire brush/alloxocloth roll to wipe out all dust, rust and flakes. Apply one coat of primer on the surface as such or thinned suitably with thinner. Allow it to dry for atleast 8-10 Hours. Now apply 1st Coat of enamel as such or thinned suitably with thinner with paint brush/spray gun. Now apply Second coat of enamel giving an interval of atleast 12 hours between the two coats. Generally 2 coats are recommended for greater protection . Covering : Enamel -80-100 Sq. ft. /Ltr. / Coat Features : They can be used on Interior & Exterior surfaces. It is the most economical paint because of it's high coverage, durability and opacity. Enamel gives a very high gloss finish to the surface.

(White Cement Based Putty) Santex Acrylic wall Putty is a white cement based putty which is manufactured by using some of the products which are being imported from other countries. Before packing, the raw-material and manufactured good is tested at every level. APPLICATION PROCEDURE: Prepare the surface by removing all the loosely adhesive material/dirt/old residual paints for the wall with emery paper, putty blade or wire brush. Then moisten the wall with sufficient quantity of clean water. Add approx. 350 ml. - 400 ml. clean water in 1 Kg. of putty. Mix with wooden peg/hand/trowel for 10- 15 minutes till a homogeneous paste is formed. Apply with putty knife/blade. Keep an interval of at least 4 hours between first and second coat. After 2nd coat giving an interval of atleast 24 hours, the surface should be rubbed with 320 number or more than that water proof emery paper & then gently with cotton cloth. The surface is now ready for painting. The total thickness of both the coats should be limited to 1.5 mm. COVERING: 25-30 Sq. Ft./ Kg/mm BENEFITS : Primer Coat It does not require any primer coat. Consumption of Paint It consumes less amount of paint because it absorbs less paint. Cost Reduction It reduces the ultimate cost of paint due to long life, no primer cost and low paint absorption. Water Resistance It resists the dampness upto certain level. Scale Formation No scale formation when it comes in contact with water. Consistency It is consistent in quality as both the raw-materials and the manufactured goods are tested under strict ISO 9001:2000 quality norms. Life of Paint It increases the life of paint due to better binding properties.

Santex Acrylic Distemper is a water based interior paint for extra smooth and elegant wall finish. The most economical, extra smooth matt finish, washable, quick drying and unmatched durability makes it the best buy for everyone. How To Use : Clean and remove loose plaster dust using sand paper. Add approximately 500 ml - 750 ml water to I kg. of Santex acrylic distemper. Apply two coats of Santex acrylic distemper on walls. Keep an interval of around 3-4 hrs. between the two coats. Generally 2 -3 coats are required. Features : It comes at a very reasonable price. Higher covering makes it more economical. It gives wall extra smooth matt finish. COVERING: 50 - 60 Sq. Ft. / Kg. /Double Coat

This is a water base primer paint meant for making a good bond between the wall and the paint, it acts as a mediator and forms a strong binding bond for a longer life of both the paint and the wall as well. How To Use : Clean and remove loose plaster dust using sand paper Add approximately 500 ml - 600 ml water to 1 Ltr. of Nidco White Primer Generally Single coat is sufficient for the walls. COVERING: 100 -110 Sq. Ft. / ltr. /Single Coat BENEFITS : It comes at a very reasonable price. It lowers the cost of paint by reducing the consumption of paint which is applied after this. Gives a strong bonding between the wall & the paint. Increases the life of the paint.

Nidco Weatherproof Exterior Emulsion is a water based exterior paint specially formulated for places with extreme climatic conditions like high rainfall, humidity and heat. It works as a protective shield against ultra violent rays, fungus & algae growth which prevents peeling, cracking and blackening of the paint for years together. How To Use : Clean the surface thoroughly using a wire brush Surface imperfections such as holes and cracks are to be filled using Nidco Acrylic Wall Putty (White Cement Based Putty). In the case of freshly plastered surfaces only, make a base coat of white cement based putty & then apply one coat of white primer. When using Nidco Weatherproof Exterior Emulsion apply 2-3 coats by diluting I Kg. of Nidco Weatherproof Exterior Emulsion with 400-500 ml. of water. Keep an interval of 4-6 hours between two coats. Generally 2 to 3 coats are recommended for greater protection Why To Choose : Anti fungus and Anti algae. Anti fading and Anti Flaking. No curing required, it dries rapidly within 4-6 hours. It is economical because of extra covering and durability.  

Extra Covering With Titanium Rutile  NIDCOCEM is a premium quality ISI Cement Paint which is manufactured as per the standards of IS:5410 by using White cement, Pigments, Titanium Dioxide and Chemicals etc. Its formulation pertains to easy mixing, longer pot life with smooth brushability and extra durability and longer life of paint. It gives a protective coating to the surface against moisture, salinity and organic growth. METHOD OF APPLICATION: Clean the surface thoroughly with wire/coir brush. Approx 1 Ltr. water is added to I kg. of NIDCOCEM in two stages. In Ist stage approx 400 ml. water is added and mixed till a homogenous paste is formed. In 2nd Stage rest 600 ml. water is added and mixed. Now the paint is ready for use. Before applying NIDCOCEM the surface should be wetted well with water. Apply first coat on damp surface using good quality brush. Allow the surface to dry for 8 to 10 hours and then cure the surface with water. Similarly apply second coat as before the next day. After the application of second coat, cure the painted surface with water as directed above. Normally just two coats of NIDCOCEM are sufficient. UNIQUE FEATURES: Good weather resistance. Prevents Fungus & algae growth. More Durable. Latest International Technology. ISO 9001 Certified Product. Washable, Hygienic & ECO Friendly. COVERING : Sq. Ft. / Kg. / Double Coat Brick Work 40-50 Rendering Cement / Sand 30-40 In-situ concrete 50-60

Nidco Unique Weatherproof Exterior & Interior Emulsion Nidoc UNIQUE Weatherproof Exterior & Interior Emulsion is a touch, 100% Pure acrylic polymer modified water based paint which can be applied on Exterior & Interior walls both. It is suitable for all tropical conditions like rainfall, heat and humidity. It gives the walls a very elegant and rich smooth finish with very showy bounding properties which prevent peeling and cracking of paint. Directions for use: Clean the surface thoroughly using wire brush. Surface imperfections such as holes and cracks to be filled using Nidco acrylic wall putty (white cement based putty). In case of freshly plastered surfaces only, apply one self priming coat by mixing water and paint in the ratio of 1:1. When using Nidco UNIQUE Weatherproof Exterior & Interior Emulsion apply 2-3 coats by diluting 1 Ltr. of Nidco UNIQUE Weatherproof Exterior & Interior Emulsion with 400-500 ml. of water. Keep an interval of 4-6 hours between two coats. Generally 2 to 3 coats are recommended. For horizontal surfaces like windows, ledges etc. an additional coat is required for greater protection. The company will not be responsible for any wrong application. Why To Choose : Elegant, rich, smooth finish. Higher covering. Suitable for all tropical conditions. It can be applied on Exterior as well as Interior walls. COVERING: 100-130 Sq. Ft. / Ltr. / Double coat.

(Liquid Paste Putty) Nidco Super Acrylic wall Putty is specially made for filling of dents, surface imperfections making base coat and leveling on primed wall/wooden surfaces prior to application of top coat finish in interiors. Directions: Remove all dust, flakes, cracks from walls by cleaning with emery paper/wire brush. Apply one coat of white primer (water thinnable) on wall. Apply with putty knife/blade Ist coat of super Acrylic Wall Putty as such or thinned suitably with water. Allow putty to dry for 6-8 hours. If required apply a second coat. Apply another coat of white primer water thinnable to seal the pores. The wall is now ready to be painted by any water base paint as finish coat. COVERING: 25 - 30 Sq. Ft. / Kg. / mm. BENEFITS : It gives a smooth finish to the wall It enhances the look of the paint because of good levelling.

Oxide Colours are used for colouring mosaic tile and terrazo, Concrete Blocks, Oxychloride flooring. Available in a wide range of brilliant shades and are resistent to sunlight. Most Economic due to high uniform colouring power.

Nidco Optima All Weather Exterior & Interior Emulsion Nidco Optima all weather exterior & interior emulsion is a high performance and highly advanced exterior & interior emulsion water based paint. It acts as a protective shield for exterior walls against algae, fungus, fading, flaking and safeguard them from adverse climatic conditions for years altogether. It gives an elegant and ultra smooth finish with excellent sheen to the wall making them shine bright when reflection of light comes on it. Directions for use: Clean the surface thoroughly using wire brush. Surface imperfections such as holes and cracks to be filled using Nidco acrylic wall putty (white cement based putty). In case of freshly plastered surfaces only, apply one self priming coat by mixing water and paint in the ratio of 1:1. When using Nidco Optima all weather exterior & interior emulsion apply 2-3 coats by diluting 1 Ltr. of Nidco Optima all weather exterior & interior emulsion with 400-500 ml. of water. Keep an interval of 4-6 hours between two coats. Generally 2 to 3 coats are recommended. For horizontal surfaces like windows, ledges etc. an additional coat is required for greater protection. The company will not be responsible for any wrong application. Why To Choose : Rich, ultra smooth finish with excellent sheen. Ant fungus, Anti algae, Anti fading and Anti flaking. Superb covering and enhanced durability makes it economical for everyone. It can be wiped with clean water after 7 days to regain it’s original beauty. It can be applied on exterior as well as interior walls. COVERING: 130-150 sq. Ft. / Ltr. / Double coat

These are both solvent based paint products used on wooden, steel and iron surfaces. Primers works as a binding force between surface and the paint where as Enamel is used as a finish coat which gives a very uniform, smooth finish with excellent leveling and hard mirror like gloss to the surface. Directions: Clean the surface throughly with wire brush/alloxocloth roll to wipe out all dust, rust and flakes. Apply one coat of primer on the surface as such or thinned suitably with thinner. Allow it to dry for atleast 8-10 Hours. Now apply 1st Coat of enamel as such or thinned suitably with thinner with paint brush/spray gun. Now apply Second coat of enamel giving an interval of atleast 12 hours between the two coats. Generally 2 coats are recommended for greater protection . Covering : Enamel -80-100 Sq. ft. /Ltr. / Coat Features : They can be used on Interior & Exterior surfaces. It is the most economical paint because of it's high coverage, durability and opacity. Enamel gives a very high gloss finish to the surface.

Nidco Acrylic wall Putty (White Cement Based Putty) Nidco Acrylic wall Putty is a white cement based putty which is manufactured by using some of the products which are being imported from other countries. Before packing, the rawmaterial and manufactured good is tested at every level. APPLICATION PROCEDURE: Prepare the surface by removing all the loosely adhesive material/dirt/old residual paints from the wall with emery paper, putty blade or wire brush. Then moisten the wall with sufficient quantity of clean water. Add approx. 400 mi. - 450 mi. clean water in I Kg. of putty. Mix with wooden peg/hand/trowel for 10- 15 minutes till a homogeneous paste is formed. Apply with putty knife/blade. Keep an interval of at least 4 hours between first and second coat. After 2nd coat giving an interval of atleast 24 hours, the surface should be rubbed with 320 number or more than that water proof emery paper & then gently with cotton cloth. The surface is now ready for painting. The total thickness of both the coats should be limited to 1.5 mm. COVERING:25-30 Sq. Ft./ Kg/mm BENEFITS : Primer Coat It does not require any primer coat. Consumption of Paint It consumes less amount of paint because it absorbs less paint. Cost Reduction It reduces the ultimate cost of paint due to long life, no primer cost and low paint absorption. Water Resistance It resists the dampness upto certain level. Scale Formation No scale formation when it comes in contact with water. Consistency It is consistent in quality as both the raw-materials and the manufactured goods are tested under strict ISO 9001:2000 quality norms. Life of Paint It increases the life of paint due to better binding properties.

Nidco Acrylic Distemper is a water based interior paint for extra smooth and elegant wall finish. The most economical, extra smooth matt finish, washable, quick drying and unmatched durability makes it the best buy for everyone. How To Use : Clean and remove loose plaster dust using sand paper. Add approximately 500 ml - 750 ml water to I kg. of Nidco acrylic distemper. Apply two coats of Nidco acrylic distemper on walls. Keep an interval of around 3-4 hrs. between the two coats. Generally 2 -3 coats are required. Features : It comes at a very reasonable price. Higher covering makes it more economical. It gives wall extra smooth matt finish. COVERING: 50 - 60 Sq. Ft. / Kg. /Double Coat