Silicone Sealants Dealers in Ghaziabad

• Type: Weatherproof
• Application: Construction Joints
• Shelf Life: 12 Months
• Color: White
• Grade Standard: Chemical Grade
• Packaging Size: 300-400 ml

TarPlastic® is a cold applied bituminous caulking compound with mineral fillers in a volatile solvent to retain its plasticity. It is available in a putty form. TarPlastic® remains plastic for a considerable length of time. The skin and interior harden to some extent after application. It conforms to the requirement of IS : 1580 – 1991. Application It is ideal for use in situation where certain degree of expansion, contraction and vibration is expected, like around J Hooks used for fixing Asbestos / GI sheets. It can also be used for caulking various types of roofs and masonry walls, including Fully plugging gaps in tiles caused by sagging of battens or otherwise in case of tiled roofs. Filling minor cracks / gaps in terraced roofs or other locations. Advantages   Cold applied and ready to use. Does not require specialised handling for application.   Does not creep or flow when applied on vertical or sloping surfaces.   Remains plastic for a considerable time and, therefore, can accommodate a good degree of expansion, contraction and vibration. Packing Available in 200 Kg, 20 Kg, 4 Kg and 1 Kg Containers. Storage Keep in cool and dry place in air tight container under shed away from heat. Health & Safety   Lid of the container should be firmly fixed, when not in use.   Inflammable and hence keep away from direct flame.   TarPlastic® shall have no harmful reaction, when it comes in contact with drinking water.   Use goggles, hand gloves and trowel during application.   Clean hands with warm soap water after application Application Methodology Surface must be clean, dry and free of grease, oil and painting compound. Concrete surface must be dry and stable (atleast) four weeks. Check that mastic is compatible with surface in terms of adhesiveness, staining and chemical compatibility (test a section first). If necessary apply a thin layer of Sealant Primer on the surface. After the primer has dried press flexible non adhesive filler on to the groove. The joint filler should be free of holes to ensure that bubbles do not form in the joint. For better finish use protection strip. For a narrow joint apply the mastic in one movement and for very wide joint, apply the mastic in three places: The first two on the edges of the joint and third in the joint filler. Smooth out with soapy water. Press the mastic against the edges and the joint while taking care not to create air bubbles. Remove protection strip.

Our superlative mild steel plates are manufactured from the premium quality mild steels to add durability. We have firmly positioned ourselves as one of the major steel plates suppliers based in india. M.s. Plates provided by us are available in different sizes and dimensions to suit the various needs of the clients. Confirmation to national and international standards is our key to adherence to quality products.

• Type: Plates
• Thickness: 1-5mm, 10-15mm, 15-20mm
• Certification: CE Certified
• Length: Multisizes
• Application: Boiler Plate, Container Plate, Flange Plate
• Color: Grey
• Surface Treatment: Coated, Color Coated, Galvanized
• Technique: Cold Rolled

We, at Tulsi Steels are engaged in trading and supplying quality MS Plates that are manufactured of Hot Rolled and Cold Rolled process and are thoroughly tested on several parameters to assure high quality to the clients. The MS Plates, offered by us, are made up of quality Galvanised Sheets that make us assure their durable life, high toughness and excellent quality. The clients can avail these MS Plates from us at in varied specifications. Attributes High strength Fire and heat resistance Strength to weight advantage Toughness and impact resistance

• Type: Silicone Sealants
• Application: Building Use, Construction Joints
• Shelf Life: 12 Months
• Color: Off-white, White
• Absorption: 50%
• water immersion: 0.60

We Supply premium quality Silicone Sealant to our esteemed clients. This Silicone Sealant is procured from the OEMs and is manufactured using fine grade raw materials. Our range offers certain desirable characteristics which is one of the reasons for its wide demand. These characteristics include high heat & temperature resistance, high di-electric strength, voltage proofing and non toxic nature. We bring forth Silicone Sealant in various specifications to suit the requirements of our clients. Features : High heat & temperature resistance Voltage proof Non toxic in nature High heat & temperature resistance

We Offer Highly Effective Tile Adhesive Dry Powder. Description Conpro TA-1 is a polymer modified cement based dry power. This construction chemical is mixed with water to make workable mortar which is highly suitable for fixing of Tiles over cementitious surfaces. Advantages Conpro TA-1 provides following benefitsFlexible to accommodate normal floor movement and temperature variations.High bond strength. Highly workable, ensures speedy work.Application Conpro TA-1 is used for fixing of all types of floor and wall tiles viz Glazed tilesMosaic tiles Terrazo tiles Brick, marble and granite tiles It can be used for tiles/stones/granite cladding on walls and columns.

• Application: Used As Carriers For Active Food Flavorings, Spices And Colorants
• Solubility: 90%
• Acid Insoluble Ash: 0.2 % max
• Moisture Contain: 10%
• Physical State: Powder
• Acidity: 3 To 4ml For 5 Gram Using 0.1 N Naoh

• Brand Name: Sika
• Grade Standard: Industrial Grade
• Features: No tooling, less labor, Very high movement capability, Very good adhesion, especially to concrete.
• Form: Paste
• Packaging Size: 858 ML
• Model Name/Number: Pidilite Chemical Grade Silicone Sealant
• Main Raw Material: Acrylic

Description Conpro TA-1 is a polymer modified cement based dry power. This construction chemical is mixed with water to make workable mortar which is highly suitable for fixing of Tiles over cementitious surfaces. Advantages Conpro TA-1 provides following benefitsFlexible to accommodate normal floor movement and temperature variations.High bond strength. Highly workable, ensures speedy work.Application Conpro TA-1 is used for fixing of all types of floor and wall tiles viz Glazed tilesMosaic tiles Terrazo tiles Brick, marble and granite tiles It can be used for tiles/stones/granite cladding on walls and columns.

• Brand Name: Sika
• Packaging Type: Bottle
• Country of Origin: Made in India
• Packaging Size: 300ml
• Form: Liquid
• Tensile Strength: 1.5 MPa DIN53504
• Movement Accommodation: + or -12.5% EN15651-1
• Elongation at Break: >400% DIN53504
• Coverage: @ 10 linear metres 9 x 9 mm fillet joint
• Joint Ratio: Maximum depth 50% of joint width
• Skinning Time: 5 mins @ 20 DegreeC
• Minimum Joint Width: 4 mm
• Maximum Joint Width: 25 mm
• Cleaning: Uncured sealant white spirit
• Stress: 0.2MPa at 100% elongation DIN53504
• Temp. Resistance: -30 Degree C to +150 Degree C
• Cure Time: 2mm per 24 hours

We deals in supplying of wide range of MS Plates.

• Grade Standard: Chemical Grade
• Brand Name: Birkan
• Form: Paste
• Main Raw Material: Silicon
• Usage/Application: For Pasting Glassware And Glass Items, Etc
• Packaging Size: 280 ml
• Features: High Bonding Strength, Heat Resistance, Resistant To Oil/Water

MS Plates, TMT Bars, Cr Sheets, ms flat, MS Beam / H Beam / ISMB

Silicone, Silicone Rubber Gasket, Silicone Rubber Profile

Silicone Sealant, Silicone

Silicone Sealant

wacker silicone sealant, structural silicone sealant, Boss Silicone Sealant

Dextrin, Gum Powder, Gaur Gum, Pasting Gum Powder, Corrugation Gum Powder

MS Plates, TMT Bar, Round Bar, Pipes, Ms Channel, m.s angle, gi sheets