Sintech Pumps Bulandshahr Road Industrial Area, Ghaziabad, Uttar Pradesh

Closed type and semi-open type impeller designs are offered to handle a variety of liquids. Impeller and casing are designed for maximum hydraulic efficiency and minimum thrust on rotating assembly. Unique space-saving design due to vertical mounting of pump. Impeller and casing are totally submerged in liquid so no priming or air venting is required. Inside tank and outside tankmounting designs available for respective applications.   features Compact design, easy to install Extra heavy shaft Screenless, chockless and glandless design. Also available in dry pit designs The impeller is submerged, so pump does not require to be primed and is always ready for use The positive suction condition also prevents the cavitation in the pump and pitting impeller and diffuser Application Dewatering applications where water is contaminated with solid particles. Raw sewage, slurry Effluent, industrial waste transfer in industries. Waste water Drainage of basements, tunnels, boiler rooms. Storm water Filtrate Juice

Torque Flow Pumps is very suitable where normal stock pumps cannot handle liquids due to plugging or abrasive wear. The principal of the hydrodynamic liquid coupling is used for the energy transfer to the pumping liquid. The impeller generates a whirlpool in the casing and this whirlpool acts as a pumping element (impeller) in the casing. Feature Un-obstructed passage to the discharge size of the pump. Handles large solids & long fibers. Gentle pumping action, no flocs / crystal damage. Low maintenance cost, no sealing rings on impeller, no small clearances to be maintained. Handles abrasive slurries. Handles vulnerable products like vegetables, fish, crystals etc. Vibration free running due to hydraulically balanced construction. Low leakage. Application Unscreened Juice Milk of lime Sewage Transfer Boiler Slurry Filtrate Juice Dirty Water Stock & Pulps upto 4% consistency

This range provides a higher efficiency with lower maintenance. Development of this new range followed an extensive consultation with major users. This has produced an advanced pump, which provides total reliability and reduced life cycle cost. Features Improved Hydraulics Stiff Shaft Design Simple Maintenance Increased Component Life with more corrosion allowance Enhanced Performance Increased Efficiency Low Hydraulic Loads Horizontal coupled Vertical open coupled Vertical close coupled Application Screened Juice Clear Juice Condensate Cooling Tower Service Water Injection Spray Fire Fighting

he robust design of multistage high pressure pumps like Suction and discharge have integrally cast centerline supports where the Top suction and discharge connection are located in the same plane. In this design Piping stressers are thereby transmitted directly to the baseplate, avoiding possible casing distortion. These pumps have the unique ability that Multi-vane diffusers maintain radial balance at all flows. The Multistage Pumps are designed and manufactured  in such a way that Balancing disc absorbs all hydraulic thrust and the faces of the disc cannot contact under any flow condition or at rest. Enclosed impellers with extra-long hubs are completely interchangeable. They are dynamically balanced and independently positioned on the shaft. All our multistage high pressure pumps are equipped with an Interstage bushings for trouble free operation. These pumps are available in Separate extra deep stuffing boxes, subject to suction pressure only. Water jackets and mechanical seals are also available. Features   Suction and discharge have integrally cast centerline supports. Top suction and discharge connection are located in the same plane. Piping stressers are thereby transmitted directly to the baseplate, avoiding possible casing distortion. Multi-vane diffusers maintain radial balance at all flows. Balancing disc absorbs all hydraulic thrust. The faces of the disc cannot contact under any flow condition or at rest. Enclosed impellers with extra long hubs are completely interchangeable. They are dynamically balanced and independently positioned on the shaft. Interstage bushings for trouble free operation. Separate extra deep stuffing boxes, subject to suction pressure only. Water jackets and mechanical seals are available. Application Fire Fighting Hilly area water supply Sprinkler System Water works Booster Service Reverse Osmosis Condensate Transfer

The SMF series are single-stage centrifugal pumps suitable for handling pure or contaminated liquids in large quantities. These pumps are of robust construction and have long working life. These pumps are highly efficient resulting in low energy consumption. Features Semi-open impeller, hydraulically balanced Handles abrasive slurries High flow up to 7000 M3 Heavy duty bearing for maximum life Applicatiopn General Water Supply Water treatment Injection and Spray Condensate Water supply Cooling tower Power industry utilities Storm water and drainage Sewage Disposal