Testing Equipment Dealers in Rajendra Nagar, Ghaziabad

• Type: Digital
• Phase: Single
• Frequency: 50 Hz
• Condition: New
• Usage: Industrial
• Voltage: 220 V
• Features: Rust resistance
• Performance: Optimum
• Usage: Industrial
• Speciality: Long functional life
• Advantage: Easy to Operate

• Type: Ph Meter
• Certification: CE Certified
• Weight: 100-200gm
• Color: Available in Many Colors
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Manual, Semi Automatic
• Body Material: Aluminum, Plastic

Based in Ghaziabad, (Delhi NCR), India we are one of the main manufacturers, exporters and suppliers of the pH Meters. These meters that we offer are used to measure the hydrogen-ion. Our good quality products are much in demand for use in a number of industries and laboratories. Competitive prices and timely damage free deliveries of orders are assured.

  High speed digitizer for faithful reproduction of Ultrasonic waveforms Direct calibration using numeric values as well as echo display calibration Built in multiplexer, no separate control box/Junction box. Multi trace multi color display for quick and easy identification of probe. Each channel has separate trace and different colors for different probes Conforms to RDSO specification no.M&C/NDT/130/2007   14 separate channels for different probes working independently   Defect disply:   Split into two halves, RH Rail in top & LH Rail in bottom half of the screen   Trolley:   Easy and Balanced movement on trackAutomatic gauge trackingTwo metallic water tanks, 20 ltrs eachLight weight yet sturdy design. Overall weight with battery w/o water is approximately 65 Kg Large (132x102 mm) high brightness display Distance measurement upto 9999 mts with 1 mt resolution, with Automatic forward/reverse distance counting Distance resettable at Km/TP as per operator choice Operator entries of defect details recording along with envelope printable from PC.   Waveform storage is virtually unlimited with data transfer to USB pen drive.

VOLTAGE STANDING WAVE RATIO (VSWR) METERES It is a high gain, voltage, amplifier tuned at the centre frequency of 1khz. it is used for measuring VSWR , attenuation and total mismatch on the line . SPECIFICATION OF VSWR, MODEL SW-115 Sensitivity 0.2μV at a 200 ohms input for full scale deflection Noise Level At least 5 dB below full scale at rated sensitivity and maximum band width input terminated in 100 ohms and 500 ohms for crystal low and high respectively . Calibration Square law, meter indicates SWR, dB Range 70 dB, input attenuator provides 60 dB in 10 dB steps, accuracy + 0.2 dB per 10 dB steps Maximum commutative error + 0.5 dB Scale selector Normal Expand and – 5dB Meter Scale SWR1-4,SWR 3-10 , expand SWR 1.1.3, dB 0-10, expand dB0.2 Gain Control Adjust the reference level, variable range 0-10 dB approx. Input “Bolo” bias provided for 4.3 mA low current bolo meters Recorder output Socket provided for recording having 1 V for full scale deflection, internal resistance of 1000 ohms or less AC Output BNC connector for amplified output Input connector BNC (F) Frequency 1000Hz + 10% Power 230 volts A.C + 50 Hz, mains supply

• Material: Metal
• Shape: Cone
• Feature: Rustproof
• Application: Industrial
• Pattern: Plain
• Corrosion Proof: Yes
• Minimum Order Quantity: As per Client Requirement

• Driven Type: Battery

Features    240×128 LCD display    Easy operationandmaintenance   Multiple cascadescans    Each channel hassorting setting   StandardHANDLER/RS232   3-102 Channels can customized Technical Details:     Type HG2515B   Accuracy   0.05%   Display range   0.01mΩ-20MΩ   Calibration function   Short Circuit   Resolution   10μΩ   Test end configuration   5 Ends   Display method   Direct reading、Δ%   Range method   Automatic、manual ,hold   Measurement range 200 mΩ－2MΩ 9range   Sorting function   HI   LO    IN   Trigger method   single、continual   Trigger delay range   0－999mS   Single test speed   Fast:30times/sec    Medium:20times/sec    Slow:13times/sec   Interface( optional）   Standard HANDLER，Optional RS232 Environment temperature/humidity   10～35℃、≤85%RH   Power   220V±10 %、50Hz±5 %             Application： ★Multi-point resistance can be tested at the same time to improve test efficiency. ▶ Component：Resistant、Inductors、Transformers、motors、relays、circuit solder joints ▶  Material：heat-sensitivematerial（fuse、sensorfor thermistor）、conductivematerialssuchas metalfoil ▶ Cables、connectors：various wires、strands、connectors、switches ▶ New energy：electric vehicle battery pack connection bridge、battery core connection resistor   StandardAccessories:     HG-24         HG-20

We are offering tile ball impact tester. Suitable for ceramic glazed tiles.. Tile impact tester to know height of rebound by 19mm ball impact from 1 meter height

A Solar Sun Simulator is the basic device to categorise photonic properties. The primary objective of this technology is to provide illumination of natural sunlight to manage indoor test facility inside a lab. The simulator is used to fake sunlight in a lab setting. Its light source is designed to produce spectral composition and similar intensity of natural sunlight.

• Type: Ultrasonic Flaw Detector
• Certification: OEM Certified
• Application: Industrial
• Condition: New
• Driven Type: Battery, Electric
• Power Source: Battery, Electric
• Feature: Accuracy, Easy To Use, Proper Working, Sturdy Construction, Superior Finish, Live Recorable
• Brand Name: MODSONIC

palmtop, ultra-light digital ultrasonic flaw detector arjun30: one hand operation, only few keys for user friendly operation, high resolution wvga display. auto plotting, dynamic dac, usb communication port. Unlimited data storage on removable micro sd card square wave pulsar with very advanced features like: * test range – 2.5 mm to 5 meter (in steel) * measurement resolution – 0.01mm * one hand operation (weighs only 800 gram with battery). *.note/cable can be attached with each of a-scan data. . * frequency 0.5 mhz to 15 mhz (wideband) * amplitude measurement up to 110% * options of display background colors including black and white for day light viewing. * peak freeze / echo dynamic feature. * reference a-scan pattern of standard test object can saved and recalled in the background for easy comparisons during testing. * b-scan data recording and color flaw plotting within the machine itself.

• Brand Name: L&T/Siemens or Polycab
• Display Type: Digital
• Application: Industrial
• Packaging: As per client requirement

Features : Application specific design High accuracy Excellent functionality Details : Direct Connection to most sensors and process signals over 30 different plug-in input signal conditioners No loss of accuracy when changing meters No recalibration when changing meters

Digital Energy Meter, Energy Meters, laser energy meter

• Standard Ranges¹: 25, 50, 100, 150, 300 mm
• Resolution: 0.025% F.S.
• Accuracy²: ±1.0% F.S.
• Nonlinearity: <0.5% F.S.
• Temperature Range¹: −20°C to +80°C
• Length × Diameter: 1 m (standard); varies × 27 mm (pipe), 51 mm (flange)

The Model 4430 Deformation Meter with flanged ends is designed to measure longitudinal deformation in dams and embankments. It can also be grouted or held in place by hydraulic anchors to measure deformations in boreholes (over the gage length). Gage lengths from 0.5 to 100 meters are available.

We offer Contact Resistance Meter with Test Current of 100ADC and 200ADC. The meter is capable of measuring and showing the Contact Resistance for 10 minutes continous in order to verify the healthiness of the Contact under measurement. Both the Contact Resistance as well as the actual current flowing in the test circuit are displayed simultaneously.

We are leading dealer, distributor and importer of Used Gear Machines, Grinder Machines And CNC Machines. We work dedicated towards preserving quality in all our endeavors of works

Electronic Energy Meters Static Energy Meter- Single Phase Electronic Energy Meter Polycarbonate Casing Three Phase 4 Wire Electronic Energy Meters (Direct /CT Operated) for Low Voltage Application 415V AC, 50 Hz IS:13779/ IEC:61036 ISI Marked Class- 1 Polycarbonate Casing

The standard electric meter box is used to house all single phase electric meters. Single-phase meters can only be housed in meter boxes complying with ESI Standards. Electricity suppliers will not connect to boxes outside of these specifications. Where it is not possible to install a recessed meter cabinet into the wall cavity, a surface mounted box is available.

• Color: 2.5Y9/1
• Dimension: W600 x H1000 x D600mm
• Power Supply: 1 200VAC 15A
• Weight: About 100kg

• Power Source: Electric
• Application: Industrial Use

• Features: Providing accurate information, Affordable prices, Made of superior quality raw material

Electronic Meter

ultrasonic rail testers, Electromagnetic Crack Detector

bdv tester

• DISPLAY: 7 Segment LED Display.
• POWER SUPPLY: 220V AC ±10%, 50 Hz.
• INPUT SIGNAL: AC Voltage/DC Voltage.
• ACCURACY: 0.5%
• MEASURING RANGE: 0 - 750V AC/DC
• SIZE & MOUNTING: 96x96x110, 72x72x110, 48x96x100mm.& Panel Mounted.

APPLICATION   Heat Treatment. Plastic Processing Machinery Oven & Furnace. Taxtile Machinery    

Electrical Testing Instruments, Electrical Instruments

Torque Tester, air motors, tool management software

eprom eraser, ic testers, IMPULSE TESTERS, IMPULSE TESTERS LOGIC ANALYSERS

control panel instrumentation, Packaging Machines, Coil Winding Machines

footwear testing equipments