Testing Equipment Dealers in Ghaziabad

Air mass flow meter max pressure: 3 bar connection: 14 inch flow rate: 0 -2slpm, 8slpm max temp - 50 deg.

• Material: Mild Steel
• Country of Origin: Made in India
• Color: Blue
• Automatic Grade: Semi-Automatic
• Usage: Laboratory
• Display Type: Digital
• Brand Name: Asian

• Brand Name: PSM
• Model Name/Number: PSM-OPPD-40
• Usage/Application: Clinic
• Display: LCD
• Screen: Digital
• I Deal In: New Only
• Minimum Order Quantity: 1 Unit

• Features: Very efficient, Strongly built, Accurate, Easy to operate , Accurate results, Precise design .
• Load on test specimen: 0-100 gms.
• Power: 220 Volt AC 50 Hz.
• Phase: Single Phase

• Application: Measuring Use
• Color: Sky Blue
• Feature: Easy To Use, Proper Working, Superior Finish
• Voltage: 110V, 220V
• Condition: New
• Frequency: 50Hz
• Power Source: Electric
• Warranty: 1year
• operation current: Single Phase

Overview The Danbridge non-destructive High Voltage Insulation Testers meet the demands for a gentle method of testing insulation condition and detecting leakage currents while protecting hardware, components and materials. Danbridge have two High Voltage Insulation Testers depending on requirements – JP30A can test using up to 30k volt, while JP36A is used when voltages up to 36k volt are desired. By using a DC high voltage-low energy test, weaknesses and faults are easily located without damaging the surrounding electronics or materials. Detection of ionization is possible by sound signal. Typical applications are: Insolation test of cables, generators, electrical motors, plastics, medico instruments, weldings, vacuum relays, power supplies, aviation equipment and many naval components.   Key Features Hauptmerkmal Minimal Discharge Energy: Output current limited to protect personnel Guard Terminal: Prevents stray currents from Influencing leakage current measurements Adjustable Output Voltage: The test voltage is continuously variable from almost zero to maximum output voltage Audible Ionisation Detection: With Active LP-Filter and Built-in loudspeaker Effective Output Ionisation Limitation: Essential for testing delicate circuits. No damage to the material if partial break-down or flash-over should occur External Output: For meter voltage indication and recording External HV switch: Panel connector for external switching Useable as kV Meter

• Type: Tensile Tester
• Application: Control Panels, Industrial Use, Power Grade Use
• Color: Green, Grey, Light Green, Multicolor, Sky Blue, White
• Condition: New, Used
• Frequency: 45Hz, 66Hz
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Power Source: Battery, Electric
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish, Water Proof
• Operating Current: Double Phase, Single Phase, Triple Phase
• Warrenty: 1year, 2years
• Temperature Capacity: High Temperature, Low Temperature, Medium Temperature
• Puncture Voltage: 11000V, 220V, 25000V, 33000V, 440V, 5000V, 580V

  High speed digitizer for faithful reproduction of Ultrasonic waveforms Direct calibration using numeric values as well as echo display calibration Built in multiplexer, no separate control box/Junction box. Multi trace multi color display for quick and easy identification of probe. Each channel has separate trace and different colors for different probes Conforms to RDSO specification no.M&C/NDT/130/2007   14 separate channels for different probes working independently   Defect disply:   Split into two halves, RH Rail in top & LH Rail in bottom half of the screen   Trolley:   Easy and Balanced movement on trackAutomatic gauge trackingTwo metallic water tanks, 20 ltrs eachLight weight yet sturdy design. Overall weight with battery w/o water is approximately 65 Kg Large (132x102 mm) high brightness display Distance measurement upto 9999 mts with 1 mt resolution, with Automatic forward/reverse distance counting Distance resettable at Km/TP as per operator choice Operator entries of defect details recording along with envelope printable from PC.   Waveform storage is virtually unlimited with data transfer to USB pen drive.

• Color: Black
• Display Type: Digital
• Frequency: 50Hz
• Feature: Accuracy, Easy To Use, Proper Working
• Automation Grade: Automatic
• Brand Name: Mitutoyo
• Power Source: 3 Volt Battery

• Type: Monocular
• Weight: 5-10kg
• Voltage: 220V
• Driven Type: Electricity
• Warranty: 1 Year
• Eyepieces: WF10X, WF15X
• Application: Science Lab
• Feature: Actual View Quality, Contemporary Styling, Easy To Use
• Objective: M10x, M40x

Digital Display Micro Hardness Tester (VHS-1000A) The objective lens and indenter can be shift automatically after finished focus. Loading, dwell and unloading the test force automatically. And the objective lens returns to initial focus status, measuring directly. Greatly improved the working efficiency. Micro Hardness Tester Digital Display Micro Hardness Tester (VHS-1000A) VHS-1000 A/B   Digital Display Micro Hardness Tester (VHS-1000B) The VHS-1000B model products have all the features and functions of the ordinary micro hardness testers. Its operator interfaces adopt the embedded LCD display screen, and all the testing data can be display on the real time. A comprehensive analysis of the material can be provided to the operators for a reference. And it’s famous as its fashion and decent design, high testing precision, stable functions and simple operation.   Main Function & Features • Operational panel is concise and clear with menu structure with English. • The hardness values, diagonal length, dwell time, testing frequency, environmental temperature, the maximum minimum value of test, average value and repeatability can be displayed directly. • The independent research and development of lifting system and positioning system, ensured the accuracy and repeatedly of the testing process. • According to different visual habits of the operators, the strength of the light source can be adjusted. To avoid the visual fatigue for long time operation. • The testing data able to be printed directly by the built-in printer. Reserved image channel can be connected with computer, used the image analysis software to analysing the physical and chemical properties of the material.

Compact and portable. Contact Resistance Meter is meant for measurement of resistance of bus bar joints, male-female contacts of isolators, SF-6 Breaker contacts, GTS breaker contacts etc. of the sub-stations. The measurement of contact resistance is done by applying a DC current of 0-100 Amps. and measuring the voltage drop across the contacts. An ammeter and a millivoltmeter (Micro-ohmmeter) are provided measuring the current and resistance. A lamp indicates the AC supply position. A variac is provided for adjusting the output current from 0 to 100 amps. Fuse for protection against overload is incorporated. CRM Range: 0.1 micro-ohm to 19999 micro-ohm in two ranges.Input: 240 V ±10%, 50 Hz. ±5%.Output: 0-100 Amps., DC, continuously variable.

• Material: MS
• Application: Industriyal
• Power Source: Electric
• Weight: 77 kg
• Diameter: 202.8 mm
• Capacity: 100Kgf

• Brand Name: Asia Vision
• Weight: 500 gm x 0 to 125 kg 
• Material: MS or SS

We are offering tile ball impact tester. Suitable for ceramic glazed tiles.. Tile impact tester to know height of rebound by 19mm ball impact from 1 meter height