Testing Machines Dealers in Ghaziabad

• TCTM Unit: Channel Type Base
• Capacity: 1000 kn to 2000 kn
• Power: Electric Motor - 1 hp/0.75 kw
• Motor Voltage: 440V, 3ph, 50Hz
• Vertical Gap: 310
• Plate Size: 220 x 220 mm
• Ram Diameter: 205 mm
• Ram Stroke: 50 mm
• Minimum Order Quantity: As per Client Requirement

• Country of Origin: Made in India
• Frequency: 50 Hz
• Material: Stainless Steel
• Power Supply: Electric
• Brand Name: Asian
• Voltage: 220 V

• Warranty: 1 Year
• Range: 200 kg with 0.1 kg least count digital display.
• Elongations: Up to 900 mm X 0.1 mm least count digital display.
• Speed: 50 mm/min to 500mm/min
• Motor: 1 HP, 1425 rpm, 220V AC, Single Phase Induction Motor.
• Power Required: 220V AC, 1500 W, And Single Phase.

Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals: or non-metals: such as rubber, textiles, plastic, paper: or finished products such as zip, rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is, therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly.   The “ASIAN”Tensile Testing Machine provides a relatively inexpensive way for determining the tensile strength and elongation of variety of raw materials. They are based on constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, while the other end is made to move at a known fixed speed with the help of motor, gear box and screw arrangement. The load exerted on the stationary grip is sensed by a load cell and indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold and auto calibration. There is a socket in the indicator which is connected to the PC. The load directly indicated in kilograms or Newton.   We provide the Window based software which give the different measurement parameter and the graph between load vs elongation. The report can be printed by using proper printer.   The elongation of the test specimen is measured on a digital indicator fixed on the frame of the test, which indicates the distance between the grips.   The variable speed model speed is vary by a knob fixed on the panel and the speed also digitally indicated on the control panel of the instrument or by simply types the speed on the monitor of the computer.   Various built in safety arrangements such as over travel protection, are provided.   The tester is finished in painting, powder coating and bright chrome/zinc plating to give the apparatus a corrosion resistant finish. It is supplied compiled which electrical. Which include micro-, switches. Push buttons and contactors for safe and convenient operation.   A variety of grips suitable for holding different materials are offered as optional accessories.

• Brand Name: Asia Vision Instrument
• Material: Mild Steel
• Country of Origin: Made in India
• Power Consumption: 230 VAC
• Least Count: 0.01 kg
• Display Type: Digital
• Phase: Single Phase
• Capacity: 200 kg

We provide high performing Leak Testing Machine. Owing to robust construction and designs, Leak Testing Machine is suited for heavy-duty performance. Leak Testing Machine is easy to operate as well as maintain and cost-effective. We have made Leak Testing Machine in different specifications to cater diverse demands of the clients.Dip Leak Test Machines : These machines work on air bubble test carried out at specific pressure. Operator locates the leakage area of rejected Components for process improvement or rework. Dry Leak Test Machines : These are differential sensor based Leak testing machine to measure pressure drop up to 0.1 Pascal. These machines are multi channel to test various chambers at different pressures and reject levels. Dip & Dry Leak Test Machines : Dip & Dry Leak Test Machines are used for automatic quality control with bubble test option. Machines are built with proper fixture design to suit profile area of components. Helium Leak Testing Machines : Helium is used to find small leaks or possibly larger leaks in bigger volumes. The helium is used as a tracer gas and its concentration is measured. .Why use helium for leak testing?Helium is one of the smallest gas molecules and is inert. Being inert it is relatively safe to use (rather than hydrogen) and will not react with any of the materials within the part to be tested. In most helium leak testing applications, one uses a mass spectrometer tuned to detect helium although it is possible to use a residual gas analyzer. Helium leak testing can be generally be between one thousand and one million times more sensitive than using pressure decay techniques.What are the benefits of Helium Leak Testing?Using this technique, you can leak test to find smaller leaks than with other test processes, using a temperature stable, dry technique. This should result in a longer product life.There are 2 basic techniques; high vacuum testing which allows leak test thresholds to be set down as low as 1x10-12mbar.l.sec-1, or sniffing which is generally used for helium leaks down to 1x10-6mbar.l.sec-1. For reference, 1 cubic millimeter per second is approximately 1x10-3mbar.l.sec-1.

Graded among the top suppliers of Compression Testing Machine, we can deliver the product at inexpensive prices. Stationed in Ghaziabad(India), our company is one of the most sought after entity in the industry.

Supplying from our facility in Ghaziabad(India), our organizations is a well-reckoned provider in the market. Fret not! We are flexible enough in delivering the products safely and this is done using the exceptional packaging material. We keep in mind the packaging guidelines to make sure that the products are safe from external destructive factors.

• Type: Binocular
• Weight: 5-10kg
• Voltage: 220V
• Driven Type: Electricity
• Warranty: 1 Year
• Application: Science Lab

The Pendulum Impact Tester model AMT‐8 is designed for conducting CHARPY, IZOD and IMPACT TENSION test. The test method conforms to IS:1757‐1973 and IS: 1499‐1977, and BS: 131 Part 2&3‐ 1972 IS: 1598‐1977, BS: 131 Part 1‐1972. The impact energy absorbed by the specimen during repture in measured as the difference between the height of drop before repute and the height of rise after rupture of the test specimen and is read on the dial scale.

Cube testing machine, Our organization is involved in fabrication and supply of precision engineered Cube Testing Machine that are used to test the concrete strength. Designed by expert engineers, these are renowned for their low maintenance, greater function reliability and durable finish standards. We offer these machines in two models-Hand operated and Electric Operated variants. Capacity 100 tonnes Pressure gauge for accurate testing of concrete cubes & cylinders Suitable for testing concrete cubes of size 15 cm x 15 cm x 15cm & concrete cylinders of size 15 cm dia x 30 cm height A hydraulic gauge that is marked in KN division and is fitted with a maximum red pointer A release valve is provided on the hydraulic pump

• Country of Origin: India
• Type: Compression Testing Machine
• Certification: ISO 9001:2008
• Application: Testing Material
• Color: Blue
• Voltage: 220V
• Condition: New
• Automatic Grade: Semi Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year
• Brand Name: GAUGE

• Color: Grey
• Condition: New
• Automatic Grade: Automatic
• Application: Hearing Testing
• Certification: CE Certified

Brand: Malti pel  Size stender  Colour netural waith  Quality optima  Grade premium  Condition New 

Suitable for any size of specimen, this Used Gear Testing Machine has an ergonomic design. The sturdiness of this Used Gear Testing Machine makes it apt to be used on the shop floor. We are a reputed Supplier of Used Gear Testing Machine. Our selection of Used Gear Testing Machine includes Used Gear Testing Machine (4-Hoffler), Used Gear Testing Machine (Bloom) and Used Gear Testing Machine (Maag-PH 60).

• Condition: New
• Material: Iron

Buyers can rely on us for on-time and safe delivery as we are aided by modern transit facilities. Our raw materials are essential bottleneck assets and thus these are carefully selected by our expert quality auditors after checking against varied quality parameters.

• Voltage: 220-380 V
• Power: 5 HP
• Phase: Single phase
• Automation Grade: Semi-Automatic
• Frequency: 50-60 Hz

• Power: AC
• Country of Origin: Made in India
• Weight: 45 Kg
• Voltage: 230 Volts
• Item Code: Gemak_FAT
• Brand: Prompt
• Test Time: 30 Sec.
• Frequency: 50 Hz
• Usage/Application: Fatomatic Fat Testing Machine
• Material: Stainless Steel

• Brand Name: BANBROS
• Supply: AC
• Speed: 5.3465 m sec
• Impact Energy: 30kgm
• I deal in: New Only
• Pendulum Drop Angle: 140 degree
• Effective Weight: 20.59 kg
• Minimum Order Quantity: 1 Piece