Tool Kits Dealers in Ghaziabad

Hardened & ground oxidised black finish to support lathe height of 90 mm set comes with 2 standard holder of 12" (12 mm) capacity. Block size - 2-14" length x 2-14" width x 1-14", (i.e. 58 mm x 58 mm x 32 mm) centr bore: 38" ( 10 mm

  ICRC / IFRC Shelter Tool Kit 01x BAG, duffle type, coated polyethylene 180g/m², 1300x400mm              01x NAILS, ROOFING, 75mm (3"), hot galva. + rubber washer, 0.5kg             01x NAILS, hot galvanised iron, for wood, 40mm, (1.1/2")                 01x NAILS, hot galvanised iron, for wood, 7.5cm (3")           01x TIE WIRE, galvanised, diam. 1.5 mm, 25m, roll               01x MEASURING TAPE, tailor type, PVC coated polyester, 20mm x 3m        01x SHEARS, straight, for metal sheet, semi-hard 1mm max., 255mm          01x CLAW HAMMER, carpenter type, 750g, wood handle                  02x NEEDLE, stitching, curved, 127mm x 1.8mm, hole 1x7mm        01x HANDSAW, for timber, 400mm blade                30x ROPE, POLYPROPYLENE, diam. 3mm, twisted, green  30x ROPE, POLYPROPYLENE, black, diam. 12mm, twisted 01x HOE, with long handle, large type       01x MACHETTE, approx. length 500mm, wooden handle  01x SHOVEL, round point with Y handle, total length approx.1m Polypropylene, black, 12mm diam., twisted / Diameter: 12mm +/- 0.5mm. Length: 30m. Weight: 1.9kg. Number of strand: 3 minimum Type: twisted.Material: polypropylene, no recycled fibres, UV stabilized. Colour: black. Tensile strength: 300kg. Handsaw For timber / Type & dimensions: carpenter handsaw, 400-450mm blade, lacquered, overall length 550mm +/-50mm. Blade thickness: 1mm +/- 0.05mm, protected against oxidation. Blade protection: Protective cardboard, teeth protection with hard, plastic cover. Seal type: laminated carbon steel, hardened and tempered. Number of teeth: 7-teeth per inch. Quality of make: Soft edges but no dents, cracks or broken teeth. Hardness Rockwell C: 45 to 50 HRC for the whole blade, 48 to 52 HRC at teeth level. Carbon content: 0.47% to 0.55%. Manganese content: 0.5% to 0.8%. Handle: Wooden dismountable handle, minimum 3 fixations, polished varnish hardwood, large 85x35mm opening for hand comfort when wearing gloves. Optional 45/90° square. Moisture minimum 10%, maximum 15%. Strength testing: With the blade inserted into a 10mm-wide slot to a depth equal to 1/3 the blade's length, but not exceeding 150mm, a deflection of 90° is applied 25 times in each direction without breakage or permanent set to the blade. Nail For Roof Sheets. Galvanized with watertight rubber washer. / Type: Iron nails, made of polished low-carbon steel, cold processed, not heat treated except for galvanization. / Shape: Spiral rolled or twisted shank, sealed umbrella-type spring-head. Corrosion treatment: hot-dip galvanized at 300g/m2 +/-10%. Tensile strength: minimum 650N/mm2. Accessories: attached rubber washer with each nail. Dimensions (+/- 5%): shank: 75x3.6mm, head diameter: 20mm minimum. Rubber washer: diameter 26mm x thickness 2mm. Packing: packed in a strong, thick PE 130g/m² plastic bag, which can be zipped or locked. Net weight: 0.5kg Shovel* Round point with Y handle. / Material: Pressed carbon-steel, hardened and tempered. Corrosion protection: black paint. Quality of make: no excess metal in the eye, no dents, no cracks, soft edges. Hardness Rockwell C: 35 minimum to 48 maximum HRC. Carbon content: 0.4% to 0.6%. Manganese content: 0.5% to 1%. Silicone: 0.37% maximum. Phosphorus & Sulphur: 0.06% maximum. Dimensions, full piece: 295 x 225mm +/-15mm. Hole diameter: front side 36mm, back side 40mm, +/-5%. Weight: 1kg +/- 50g, without handle. Hoe With long handle. Material: hot forged carbon steel, hardened and tempered, at a maximum the hardened zone should reach halfway up the back of the blade. Corrosion protection: black paint. Quality of make:no excess metal in the eye, no dent on the cutting edge, reinforced head with a rib from the eye to the middle of the blade length. Hardness Rockwell C: 35 minimum to 48 maximum HRC in hardened zone of the blade. Carbon content: 0.5% to 0.8%. Manganese content: 0.6% to 1.2%. Silicone: 0.37% maximum. Phosphorus & Sulphur: 0.06% maximum. Dimensions, full piece: 180 x 310 mm +/-10mm including the eye. Hole diameter: high raised neck, front side 43 mm, back side 48  mm+/-2mm. Weight: 1.250kg +/- 150g, without handle, depending on the type of hoe. Machete Type: curved blade, 405mm/16", lacquered against oxidation, overall length 55cm. Blade thickness: 2.5mm thick with 3 grooves that runs the full length of the blade to key in the handle. Handle: wooden handle with 3 aluminium rivets plus washers. Material: hot forged carbon steel, hardened and tempered, hardened throughout the entire blade, but remains normal past the first rivet hole. Protection: blade packed in carton pocket for protection. Quality of make: no dent on the cutting edge. Hardness Rockwell C: 45 minimum to 50 maximum HRC near cutting edge, test 3 positions along the cutting edge. Carbon content: 0.48% to 0.65%. Manganese content: 0.6% to 1%. Silicone: 0.37% maximum. Phosphorus & Sulphur: 0.03% maximum. Shears Straight, for metal sheet, semi-hard 0.8mm max., 260mm. Type: tin snips for intensive use and easy maintenance. Make: each blade and handle forged as one piece, symmetrical blades. Capacity: up to 0.8mm semi-hard iron sheet. Material: hot forged carbon steel, hardened and  tempered, special treatment applied to the blade edge. Rustproof: protected against corrosion with special paint. Dimensions: overall length: 250 to 260mm. Maintenance: dismountable in 2 parts only, with bolt and self locking nut.     Materials Nail Iron, for wood, large. Type: iron nails, made of polished low-carbon steel, cold processed, not heat treated except for galvanization. Rustproof: hot dip galvanized at 300g/m2 +/-10%. Tensile strength:minimum 650N/mm2. Shape: flat, smooth,circular head; plain, round shank and diamond point. Dimensions (+/-5%): ll length x diameter: 75x3.6mm, head diameter: 7.7mm. Packing: packed in strong, thick PE 130g/m²  plastic bag, which can be zipped or locked. Net weight: 0.5kg per type.  Nail Iron, for wood, small. Type: iron nails, made of polished low carbon steel, cold processed, not heat treated except for galvanisation.Rustproof: hot dip galvanised at 300g/m2 +/-10%. Tensile strength: minimum 650N/mm2. Shape: ll flat smooth circular head, plain round shank and diamond point. Dimensions (+/-5%): ll length x diameter: 40x2.2mm, head diameter: 5mm to 5.5mm. Packing: packed in strong thick PE 130g/m² plastic bag, which can be zipped or locked. Net weight: 0.5kg per type. Tire wire Galvanised, diam. 1.5 mm, 25m, roll. Materialll low carbon steel, hot dip galvanised with minimum 40g/m2, binding /tie wire. Quantity: roll of 25m. Dimension: diameter 1.5mm +/-5%. Tensile strength: minimum 340 N/mm² to Maximum 500N/mm. Claw hammer Type: Carpenter hammer, head and handle, hammer head with flat and claw side, as per ISO15601, except for the pull-apart test force.Material: high-carbon steel head, treated to achieve a martensitic structure, with dressed striking faces. Quality of make: smooth surface and edges with no dents or cracks; no excess metal in the eye. Weight of the hammer: Total weight 750g +/- 50g (equivalent to 700g minimum, 800g maximum). Hardness Rockwell C: 50 minimum to 58 maximum HRC on striking faces. Hardness Rockwell C: 35 maximum HRC closed to the eye.  Polyethylene 1 bag per kit. Material: Standard ICRC/IFRC tarpaulin, white, without the bands. Type: Square rectangular base duffle bag with 6 aluminium bag or galvanised steel eyelets and a 10mm PP rope for closing that can also act as a shoulder handle. Dimensions: Total length 1250mm. Final packed maximum dimension 1200x300x150mm +/-10mm Cardboard fold 1 per kit. Material: Double-walled corrugated cardboard.Type: One or several pieces of cardboard in which the complete kit is securely packed before being placed in the bag. The cardboard folds on the 2 long sides and one short side. Dimensions: To fit in the outer bag. Sealing: Strapped with 2 heat-sealed 10mm minimum plastic straps. Quality: Loaded cartons should withstand 1m-high stacking on pallets, and several handlings (hand and forklift) without damage. Palletising: The pallets (wood or metal) are made or reinforced in such a way that allows 2 levels stacking (stacking up to 2m high), without any damage for the kits and the kit packaging.

• Brand Name: Mitutoyo
• Interface Type: RS232
• Cable Length: 1m
• Dimensions: 38 x 64 x 21 mm
• Data Input: 1 x Digimatic
• Footswitch connector: Yes
• Mass: 61gm

We are offering jackly tool kits- 6032 & 6036.

• Application: Drilling
• Weight: 2kg

We are earnestly engaged in offering the complete range of Hand Pump Tool Kits in the industry. Our Water Hand Pump Tool Kits includes button die, thread tap, pipe thread, pipe wrench, jaw spanner, lubricating oil, multipurpose grease in packed container, Nylon rope, and so on. These hand pump kits are especially designed for the repairing and maintenance of all kinds hand pumps. Apart from that, we are recognized as one of the Deepwell Hand Pump Tools Suppliers in India. Technical Description of Standard Tool Kit Button die in high speed steel with die holder,M12 x 1.75- 1 no. Thread tap in high speed steel with handle, M12 x 1.75- 1 set Pipe thread die with die stock 32mm- 1 no. Pipe wrench 600mm as per IS:4003/Part I (1978)-2 nos. Pipe wrench 450mm as per IS:4003/Part I (1978)- 1 no Double ended open jaw spanner 16x18mm in CV steel- 2 nos. Screw driver 250mm x 8mm dia-1 no. Adjustable spanner 250mm-1 no. Ball pein hammer with handle (1kg approx.)-1 no. Hack saw frame with six spare blades 300mm- 1 no. Flat file with handle, rough, 250mm � 1 no. Wire brush, fine wire � 1 no. Lubricating oil in plastic can with nozzled outlet -200 ml Multipurpose grease in packed container- 2 kg 15.Nylon rope, 3mm -75meter Spirit level 300mm � 1 no Tool box with locking arrangement to accommodate above items

We are offering stainless steel kitchen tool set is extremely useful in houseware, kitchenware. We are offering the product at a competitive market price. We manufacture them from fine quality raw material taken from reliable sources. We supply world wide to fulfill the different needs of our clients. The product is available in different colors and sizes. specifications set consists – ladle, skimmer, turner, basting spoon, slotted spoon, pasta fork stainless steel 202 / 304 / 430 grades attributes available in kitchen tool set with caddy easy to handleprices as per thicknessready for bulk dealingquick delivery

• Country of Origin: India
• Size: Multisize
• Material: Copper
• Feature: Easily Washable, Impeccable Finish
• Pattern: Plain

We have been catering to the exact demands of the clients with a royal collection of copper bar tool set. Especially designed for giving a Royal Touch to the guests while having drink, the array is sure to provide the best performance. This bar set is ideal to boost the Bar-Tending Skills with unmatched designs and styles. The assortment is designed to add luxury to the way of serving drinks without being loud. Impressively crafted, the assortment is available in 100% pure and high grade copper making it highly durable as well as resistance to corrosion.  

• Material: Cast Iron
• Brand: Fairbizps
• Technique: Hot Rolled
• Usage/Application: Hand Pumps

Screw Box, Dhs Plate, Interlocking Nail, large cannulated screw

Percussive Rescue Tool Kit, Industrial Safety Helmets

Mechanical Splicing, Zoning Analysis, Site Planning / Layout

Attrico Car Service Tool Kit, Navjyoti Long Body Taper Cock

Mechanical Splicing, Bubble Leak Testing

Hand Tool Kit

Cable Tool Kit, Stainless Steel Cable Tie, Reusable Cable Tie

SKIL Household Tool Kit, 9 PC, Bosch GBL 800E Air Blower, 800W, 16000 RPM

Mini Emergency Car Tool kit, fancy keychains