Vertical Pumps Dealers in Ghaziabad

• Material: Stainless steel
• Power Source: Electric
• Voltage: 110-240V
• IP Rating: IP 55
• Tolerance: +-10%

• Capacity up to: 400  M3/Hr
• Head up to: 55 MLC
• Work. Pressure: 15 Bars
• Work. Temperature: 120 Degree C
• Shaft Sealing: Mechanical Seals / Gland Packing
• Capacity up to: Cast Iron, Carbon Steel,  SS316, SS304, Bronze

• Rod Diameter: 12mm
• Maximum installation depth: 80 m

Force lift and Conversion kitsattachments are available for the deepwell pumps. The force lift pump system arrangement is designed to deliver water upto a height of 6-8 meters from ground level. Suitable for installation on 100mm to 150mm diameter bore wells. Can be used to lift water up to 6 m above the ground level. Rated discharge 900 LPH @ 40 stroke per minute Maximum installation depth 80 m Can be adopted for use with water filter and water purification device. Low operation and maintenance cost Easy to operate and use. MSSS Connecting Rod Diameter : 12mm

Vertical Mixed Flow Pump finds its application in flood control, groundwater development, irrigation, shipping, water supply and water distribution. We supply an extensive range of Vertical Mixed Flow Pumps which is manufactured using superior quality raw material as per the set industry norms. Vertical Mixed Flow Pump is highly efficient and durable.

VERTICAL MULTISTAGE PUMP The Lowara e-SV vertical multistage pump is a highly reliable and technologically advanced multipurpose pump. It’s capable of satisfying the needs of a wide variety of users and many different construction designs are available. The e-SV range feature models in eleven sizes with 1-3-5-10-15-22-33-46-66-92-125 m³/h nominal capacities.

Force lift and Conversion kits/attachments are available for the deepwell pumps. The force lift pump system / arrangement is designed to deliver water upto a height of 6-8 meters from ground level.Suitable for installation on 100mm to 150mm diameter bore wells. Can be used to lift water up to 6 m above the ground level.Rated discharge 900 LPH @ 40 stroke per minuteMaximum installation depth 80 mCan be adopted for use with water filter and water purification device.Low operation and maintenance costEasy to operate and use.MS/SS Connecting Rod Diameter : 12mm

This range of pumps offer widest range of selection depending upon the pumping liquid from clear water to varying degrees of contamination. These pumps are designed to operate at 50Hz or 60 Hz, in single or more than one stage according to head required.

• Capacity (Maximum): 600 m3/hr.
• Head (Maximum): 100 m
• Temperature: 80°C
• Working Pressure: 10 kg/cm2

Closed type and semi-open type impeller designs are offered to handle a variety of liquids. Impeller and casing are designed for maximum hydraulic efficiency and minimum thrust on rotating assembly. Unique space-saving design due to vertical mounting of pump. Impeller and casing are totally submerged in liquid so no priming or air venting is required. Inside tank and outside tankmounting designs available for respective applications.   features Compact design, easy to install Extra heavy shaft Screenless, chockless and glandless design. Also available in dry pit designs The impeller is submerged, so pump does not require to be primed and is always ready for use The positive suction condition also prevents the cavitation in the pump and pitting impeller and diffuser Application Dewatering applications where water is contaminated with solid particles. Raw sewage, slurry Effluent, industrial waste transfer in industries. Waste water Drainage of basements, tunnels, boiler rooms. Storm water Filtrate Juice

Operating Parameters    Capacity (Maximum)                  1,000 m/hr.  Head (Maximum)                       100 m  Temperature                               80° C   Special Features  Vertical pumps take little space in plan since the liquid is led away to the axis of shaft.  The impeller is submerged, so pump does not required to be primed and is always ready for use.  The positive suction condition also prevents the cavitations in the pump and pitting in impeller and diffuser.  Due to positive head at suction the pump gives its rated performance as well as high overall efficiency. Design Features Glandless type and / or vapour sealing type execution available. In vapour sealing design, the gland and acid resistant asbestos packing prevents the leakage of vapours of hazardous liquids from coming out. Thus the environment is kept free from pollution and dangerous inflammable obnoxious liquids. Very rigid construction with extra wall-thickness provided for corrosive where fluctuations in liquid levels are considerable. The pump unit is suspended by a column pipe applications. It is virtually maintenance free. Vertical pumps are best suited for wet pit applications which also protects the transmission shaft and is submerged in the liquid to be pumped. These pumps require small floor area and can be started without priming. Discharge / Suction flanges conforms to ASA / DIN / BS standards.Delivery CASING : The delivery casing has an area sufficient enough to ensure easy passage of liquid with optimum efficiency.IMPELLER : The delivery casing has an area sufficient enough to ensure easy passage of liquid with optimum efficiency. Impeller : Impellers are enclosed / semi-open / open with large passage ways and thickened vanes at the inlet. All impellers are dynamically balanced. Closed type and semi-open type impeller designs are offered to handle a variety of liquids. Impeller are designed for maximum hydraulic efficiency and minimum thrust on rotating assembly. Unique space-saving design due to vertical mounting of pump. Impeller and casing are totally submerged in liquid so no priming or air venting is required. Inside tank and outside tank mounting designs available for respective applications. Pump Shaft :  The pump shafts are of high tensile carbon steel and designed for high torque transmission. Stainless steel shafts can be provided against requirement. The bearing areas are protected by stainless steel sleeves. Intermediate, line and head shafts are of ample strength and rigidity. Minimum bearing span is adopted to keep deflection and vibration to a minimum.Line Shaft / Intermediate Shaft : Line shafts / intermediate shaft of high tensile carbon steel designed for high power transmission are connected by intermediate couplings and run in closely spaced bearings for vibration-free operation.Motor Stool : The heavy duty cast iron / mild steel motor stool is capable of taking the motor and rotor assembly weights as well as the axial thrust. It also houses the thrust bearings.Intermediate Bearings : The transmission bearings may be lubricated by one of the following methods:1. External supply of clear cold water.2. By liquid being pumped.3. Grease External clear water lubrication is recommended when it is available at a pressure higher than the discharge pressure of the pump. If the pumped liquid has a turbidity of less than 50 ppm (silica scale) or 500 ppm (chloride scale) and total solids less than 3000 ppm with pH value between 6.5 and 8.5, then it may be used as the lubricating liquid. Grease lubricated bearings are recommended when external or self lubrication is not possible. Grease is supplied by a grease pump driven either through the pump coupling or by a separate motor. Angular contact ball bearing at the top to take residual axial thrust and the weight of rotating parts.Delivery Pipe : Heavy duty delivery pipe upto the motor stool floor level with one bend is standard supply with all.Accessories : The following accessories are recommended.1. Screens at inlet of the sump to prevent solids of sizes larger than that recommended from entering the pump.2. Liquid level controllers to guard against dry running of the pump.3. Power operated positive displacement grease lubricator for grease lubricated pumps.4. Delivery pipes and bend upto the motor stool.Salient Features  Compact design, easy to install  Extra heavy shaft  Screenless, chockless and glandless design  Also available in dry pit designs Areas of Application  Dewatering applications where water is contaminated with solid particles  Raw sewage, slurry  Effluent, industrial waste transfer in industrie's Waste water  Drainage of basements, tunnels, boiler rooms  Storm water Construction Material Other than above stated material pumps are available in Cast Steel, CA 15, Ni-Resist, Super Duplex, CN7M, Haste alloy and other special stainless steel alloys. The materials of construction are offered as an example of generally accepted practice, but are not intended as recommendations of fitness for a particular purpose. The customer must determine and take the ultimate responsibility for specifying the proper materials to handle the particular fluid pumped. Unless otherwise specified, all pumps shall be furnished with the standard fitted materials to meet the system requirement.

• Type: Vertical Sump Pump
• Shape: Vertical
• Application: Ground Water Supply
• Color: Blue, Green, Grey, Red, White, Yellow
• Voltage: 110V, 220V, 380V
• Fuel: Electric
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw
• Pressure: 0-10bar, 10-20bar, 20-30bar, 30-40bar
• Warranty: 1 Year, 2 Years

Used for Irrigation,Injection,Spray and other water supply schemes. These pumps are made to customers specifications and can be given in all materials.

Force Lift Hand Pump, Deep Well Hand Pump, Treadle Irrigation Pumps

Kirloskar Vertical Multi-Stage Inline Pump, KDS Single Phase Monobloc Pump

vertical turbine pumps, propeller pumps, Submersible sump pumps

Force lift and Conversion kitsattachments are available for the deepwell pumps. The force lift pump system arrangement is designed to deliver water upto a height of 6-8 meters from ground level.

Vertical Turbine Pump, End Suction Pumps, fire fighting, hydro turbines

Force Lift Hand Pump, Treadle Pump, Tie Wire

Lift shallow Well Hand Pump, solar water heater repairing services, Buckets

vertical turbine pumps, propeller pumps, Sump Pumps, Solar Pedalflo Pumps

Vertical Propeller Pump

vertical turbine pumps, hydro turbines, Submersible Sewage Pump

vertical slurry sump pump