Automatic Wire Drawing Machines Dealers in Ghaziabad

• Country of Origin: India

Straight Line Wire Drawing Machines were developed for straight or deflection free drawing of wire to provide better drawability lower frictional contact and lower operator interference.Theoretically there is no limit as far as the wire material or wire diameter is concerned to be drawn on these machines. ARIHANT has pioneered to indigenously develop the Straght-Line Wire Drawing Machine Technology in India. Presently the range available is capstan diameter 900mm, 750mm, 600mm, 550mm, 500mm, 460mm, 400mm and 300mm for inlet wire diameter 16mm down to 0.5mm. Line speeds upto 22 Mtrs / Sec.Features of Straight Line Wire Drawing Machine: Better productivity due to higher drawing speeds due to twist-free operation. Easy operation and faster threading. High pressure Narrow gap, internal water cooling for high efficiency cooling of wire. High degree of reliability - low downtime due to lower no of wear parts. Much better finish wire quality due to a gentler handling of the wire during the drawing process (less wire deviations, low torsion etc.) as well as an optimized wire cooling. Greater flexibility and lower current consumption due to modern AC drive technology and efficient power transmission system. PLC based control with profibus digital communication and fault diagnostic system. These heavy Straiht Line Wire Drawing Machines provide remarkable drawing performance for Low, Medium and High Carbon Steel Wire, Stainless Steel Wire and special Alloy Steel Wire and Non-Ferrous Alloy Steel Wire.This machine has a sensor roller between the drum and the next die such that the wire passes in contact with this roller. These rollers have sensors to detect the position of the arm and maintain tension on the wire by regulating speed of the drums. The drums of this machine are inclined to the vertical axis to effect fill on the drums. Principally this machine is best suited for thick wires.

• Condition: New
• Size of bobbin: 630mm
• Max. Width: 475mm
• Barrel dia: 350mm
• Max. Speed: 600Mete
• Max Size Of Cable: 6mm Dia
• Loading/Unloading: Automatic

• Voltage: 380v
• Warranty: 1 Years
• Condition: New
• Weight: 5400*1450*1020
• Dimension: 5400*1450*1020
• Machine Weight: 4200KG,4500KG

The material that is used for the production complies with high quality standards and quality-proved by the experts. Also, we make sure that the raw material is sourced from the trusted places. We are capable of delivering the orders on time and at any desired Ghaziabad(India) as we are supported by up-to-the-minute facilities.

• Voltage: 220V
• Warranty: 1 Year
• Type: Wire Drawing Machine
• Weight: 100-1000kg
• Operating Mode: Automatic
• Power: 3-6kw
• Driven: Electric

We are one of the eminent Manufacturers and Suppliers of wire drawing machine from Uttar Pradesh, India. Facilitated by advanced production unit, our wire drawing machine is manufactured using quality approved components in accordance with set industry norms. In addition to this, a team of experienced quality inspectors thoroughly examine wire drawing machine upon numerous quality parameters to ensure its un-interrupted functionality. When it comes to delivering Wire Drawing Machine, we always supply it using fast shipment modes.

• Voltage: 380 V
• Frequency: 50 Hz
• Material: MS
• Wire Type: With Lead
• Gauge: 18 SWG

BLOCK AND COOLING SYSTEM : Drawing drums are forged alloy steel,fully hardened and ground.Surface hardness:58-60 HRC. Drums are internally water cooled with narrow gap system.Complete wetting of wall by highly tubulent motion of water,higher cooling effect with increasing drawing speeds. Drums are externally cooled by air from a single common blower through duct forming part of machine frame. DIES BOXES : Dies are direct water cooled from a separate manifold.Dies are loaded from top for quick fixing. Motorized rotating die holders can be provided; extra long to adopt standard pressure dies. Die boxes are equipped with motorized lubricant stirrer. Rotating die holders have single motor for stirrer and holder. Die boxes are adjustable in horizontal and vertical plane for cast and helix adjustment of wire. Die boxes are suitable for dry lubricants, large enough to store sufficient quantity of lubricant. SPEED CONTROL : Speed regulation of each block is achieved through self centering sensor arm on which the wire is guided. SAFETY GUARD : Well balanced sheet metal guards,with transparent shet/wire mesh to see through condition of machine,are provided. Guards are electrically interlocked not to allow running of machine with open guards. Sound proof guard for low noise level with suction of burnt powder can be provided. TRANSMISSION : Motion transmission from motor to block shaft is achieved directyl by V belt and pulleys or through helical gear arrangement. INTELLIGENT CONTROLS : Specially designed A.C. Three Phase Inverter Duty/Servo Motors L&T Supernova/Siemens 1ph7 constant torque upto base speed and constant power above base speed. Digital A.C. Three Phase Vector Flux Inverter Drives ABB ACS 800/Siemens Sinaemics provide the system with fastest communication through profibus. All blocks are working with a range of encoder feedback,thermal protection, flux vector controlled. The logic control is attained automatically by PLC system (siemens) automatically calculating reduction rate and mointoring all related dates. Utmost control flexibility allows any drafting programme and drum skipping. HMI displays all function data making it easier for the operator to take control of the machine during production. Displays and memorizes the fault for easy diagnosis. Can be interfaced with remote computer to collect all information. Cubicles are sheet steel enclosures with IP54 protection,duly power coated and with exhaust. Electric control system provides a smooth acceleration from zero to pre-selected value. Normal stop is attained with ramp down control within 15 to 30 secound. Emergency stop/quick stop is attained within 6 to 8 seconds. This can be achieved without a broken wire.

• Country of Origin: India
• Voltage: 240 V
• Min Finish Wire Diameter: 3 Mm
• Max Inlet Wire Diameter: 10 Mm
• Power: 1-3kw
• Frequency: 50 Hz
• Capacity: 800 Kg Per Hour
• Usage: Wire Drawing
• Type: Mechanical
• Automation Grade: Automatic

• Automatic Grade: Semi-Automatic
• Min Finish Wire Diameter (mm): 2-3 mm
• Layout: Horizontal

• Features: High operational fluency, Low power consumption, Require less maintenance

The precision engineered Wire Drawing Plants fabricated by us are used for drawing straight and deflection free wire. These machines are manufactured as per the technological advancements and are appreciated for robust construction, maximum output.    

• Features: Submerged lubrication or splash lubrication options, Support cone or all drawing cone design, Dancer System at wire exit for providing synchronization of wire collection at spooler
• usage: For drawing Mild Steel, Carbon Steel, Stainless Steel, Copper, Aluminum and their Alloys

We offer an exclusive range of Wire Take Up Machines for galvanizing plant, patenting furnaces etc. This machine can be operated by hydraulic, electrical or pneumatic process. On load variable drive is provided in consultation with customer. Comprises of: Fabricated base frameGear-train with extended output shaft to mount clutch, coiler, lock nut Each coiler is provided with two sets of killing pulleysGear-train is coupled with hexible couplings Sizes available (in mm): 600 dia550 dia450 dia400 dia300 dia200 dia Capacity: 20-40 Lines

The OTO type continuous wire drawing machine has the characteristics of simple structure, low cost, and easy operation, and it is suitable for drawing a variety of low,medium and hi-carbon material, especially for mild steel wire, spring steel wire, welding wire and copper wire aluminum wire, etc.

Meenakshi Wire Products offers wide range of high speed state of the art study. O.T.O. B.B. Type Wire Drawing Machines. The construction of the machine is such that it can withstand rugged workshop conditions of Wire Drawing Plant and can guarantee the performance and accuracy with least maintenance. These O.T.O.B.B. Type Dry Wire Drawing Machine have wide field applications in Stainless Steel, High Carbon Steel, Alloy Steel, Mild Steel, Copper Wire Drawing. The wire is drawn through a die which is fitted in independant Die Box and is accumulated on the Block, and later being taken through the OTO Pulley to the next Die. BB Block is Twist Free Type Machine with Free Bobbin Block for accumulation and transfer to next block and is better for higher speed & better finish materials.

Machine is designed to operate continously. First block is provided oto type for wire accumulation,allwoing forthe removal of any rod,snarl or changeover of coils at feeding end. Vfn system on oto block keeps uniform tension of wire passing over with on jerks. Each block is equipped with pressure regulating valves and gauges for accurate control of air pressure on sensor arm. Separate maiflods are provided for water to drums and dies with regulating valve on each block.

Bed sliding type, drum hanged on vertical sliding frames. Machine suitable for medium-large size of cable pay off/take up/rewinding. Motorize drum loading, drum lock. Drive control of wire traversing pitch of take up and speed synchronization.

• Type: Dry Drawing Machine

• Type: Dry Wire Drawing Machines
• Features: high performance, low maintenance , long working life

Wet Wire Drawing Machine has become necessity in wire making units. Keeping that emerging need in mind, we bring forth efficient Wet Wire Drawing Machine for the clients. Our Wet Wire Drawing Machine reflects peerless amalgamation of futuristic engineering and dedication.  We offer Wet Wire Drawing Machine in different specifications so that we can satisfy divergent wire making requirements. Specifications of Wet Wire Drawing Machine : Used to draw intermediate wires of mild steel, carbon steel, stainless steel, copper, aluminum and alloys Options like submerged lubrication or splash lubrication Cones shaft assemblies with easily removable bolts Dancer system for synchronization of wire collection  Re-circulation of lubricant through fluid pump  High speed timing belts transmission for power saving Highly efficient alloy steel hardened High service life due to tungsten carbide cones