Berg Strip Connector Dealers

• Brand Name: LBD Robotics PVT LTD

These are the connectors used to take input or give output with the help of wires. They can be cut according to the need. 40 pin header.

• Country of Origin: India
• Type: . Pin Header
• Color: Black
• Gender: Male
• Number of pins: 40 pin
• Spacing(pitch: 2.54 mm

A male berg strip or pin header is a form of electrical connector therefore it consists of many rows of male berg pins typically spaced 2.54 millimeters apart. But the sizes are common that is 25 millimeters. The male berg pin headers are mostly used inside equipment, rather than being used as a connector on the outside of the device. All 40 pins can be cut to any size. Used with custom PCBs or general custom headers. These strips sell as long sticks of 40 connectors. You can easily break off to the right number of pins. Package includes This is the pack of 100 sticks of 25 mm Male Berg Strip 1 x 40 Pin headers Features   100% tested genuine product Strong plastic material is used for shoulder box's Best quality Pure copper alloy is used in making of these pins Each strip contains 40 male pin headers.

• Color: black
• Usage/Application: Telecom/Data/Network
• Current: 1amp
• Phase: single
• Pitch Size: 2.54mm,2.00mm,1.27mm,1.00mm

• Material:: Mild Steel
• Current (Ampere):: 20 A
• Weight (Gram):: 100 to 500 g
• Packaging Type:: Box

For ensuring quality products at buyer's end, we check each and every product at diverse stages including production, packaging and delivery. Supported by an advanced transit system, we have become capable of delivering the orders within promised time.

• Material: PVC
• Shape: Rectangular, STRAIGHT
• Brand Name: FCI , AMPHENOL , TAIVAN ,
• Application: PCB CONNECTION
• Surface Treatment: 2.54 Mm

40*2 burg steip straight smd or through whole 

• Application: Industrial ,Electronics Appliances, Measurement and Test Equipment, Automotive
• Type: 40*1,40*2
• Features: Durable, Good quality
• Product Type: Connectors Stright& Rectangular
• Shape: Rectangle

• Number of Pins: 40
• Strip Width: 2.5 mm
• Strip Length: 10.25 cm
• Strip Height: 1.2 cm
• Pin Height: 4 mm
• Pin Spacing: 0.1& Amp; Amp; Quot; (2.54 Mm)

• Pitch: 1mm, 1.27mm, 2mm, 2.54mm
• Material: PCB
• Connector Type: Female

Single Degree Pin Quality:-Export Qulity Material:- Brass Min. Order:-50000 Piece ___________________________________________________________________

• features: Vertical integration of contact manufacturing, injection of insulating material,Machines designed to insert contacts with selective plating

As an expert in electronics components, Axon PinTec has designed and manufactured interconnect Pin Headers for automotive and industrial applications for 15 years. The company located in the Alsace region in France has integrated the manufacture of contacts and the injection of insulating materials. Axon’ PinTec is equipped with automatic insertion machines which are able to manufacture large volumes. This technological expertise enables the company to adjust production to customers’ needs.

• Pitch: 2.54mm (0.1")
• Weight: 0.40g ±5%

• Type: Strip Connectors
• Material: Plastic, Aluminium
• Application: Electricity Distribution
• Color: Black
• Feature: Easy To Connect, Electrical Porcelain, Four Times Stronger, Shocked Proof, Superior Finish
• Condition: New
• Connection Type: Male
• Country of Origin: India
• Gender: Male
• No. Of Pins: 40
• Temprature: -20 to 50 Degree C

• Connector Type: Female/Jack
• Material: SS
• Number of Pins: 42
• Country of Origin: Made in India
• Length: 10mm, 15mm, 20mm, 25mm, 40mm ( 8 micron plating)
• Application: Battery/Power, Automotive, Audio & Video
• Configuration: Circular/Cylindrical connector

• Current Rating: 3.0A AC/DC
• Voltage Rating: 250V AC/DC
• Contact Resistance: 20m ohms Max

• Type: Male – 90 degree / right angled
• Spacing: 2.54 mm (0.1″)
• Pins: 40

40 PIN ANGLE SINGLE ROW PIN HEADER A 40 pin header (or simply header) is a form of electrical connector, often associated with ribbon cable connector. It consists of one or more rows of pins typically spaced 0.1 inches (2.54 mm) apart, but sometimes 2mm (0.079 in) or 0.05 inches (1.27 mm) is used as well FEATURES OF 40 PIN ANGLE SINGLE ROW PIN HEADER: Easy to interface I/O peripherals with microcontroller. APPLICATIONS OF 40 PIN ANGLE SINGLE ROW PIN HEADER: DIY projects. LCD interfacing. Keypad interfacing. And many more.

• Shape: Rectangular
• strip Connectors: Male and female berg
• Pin: 40 pin
• Pack Type: Box
• Current Rating: 30 Amp

• Input Voltage: 5V @ 500mA
• Power Consumption: Normal stand by:5V@29mA, WIFI STA mode: 5V@60mA, Bluetooth mode data sending status: 5V@84mA, Deep-sleep mode: 5V@0.35mA
• Operating Temperature: 0C to 60C
• Weight (GM): 2.6 MULTIFORM 5 options of installation, means endless possibilities! (SMT, DIP, flywire, grove interface), with a high-temperature resistant plastic shell, 3D antenna and components can be better protecte
• Master Control Resource: ESP32-PICO-D4
• Flash: 4MB
• Wireless communication distance                          : AP Mode: 16m, BLE Mode: 110m, Class Bluetooth Mode: 90m
• UI: Programmable physical keys x 1, Programmable RGB LED (SK6812) x 1
• Antenna Type: 2.4G 3D Antenna
• WiFi: 802.11 b/g/n (up to 150 Mbps for 802.11n), spectrum range: 2.4 GHz
• Bluetooth: Blutooth V4.2 BR/EDR and BLE standard, NZIF receiver, sensitivity up to -97 dBm
• Module Resource Interface: ADC, DAC, touch sensor, SD/SDIO/MMC host controller, SPI, SDIO/SPI slave controller, EMAC, motor PWM, LED PWM, UART, I2C, I2S, IR remote controller, GPIO, pulse counter
• IO interface x12: G0, G1, G3, G26, G36, G18, G19, G21, G22, G25, G32, G33
• IO interface spacing: 2.54mm
• Net weight (gm): 2.6
• Length (mm): 18
• Width (mm): 24
• Height (mm): 4.4
• MULTIFORM: 5 options of installation, means endless possibilities! (SMT, DIP, flywire, grove interface), with a high-temperature resistant plastic shell, 3D antenna and components can be better protected.
• LOW-CODE DEVELOPMENT: STAMP-PICO supports UIFlow graphical programming platform, scripting-free, cloud push; and fully compatible with Arduino, MicroPython, ESP32-IDF, and other mainstream development platforms to quickly build various applications.
• HIGH INTEGRATION: STAMP-PICO contains 5V->3.3V DC/DC port, GPIOx12, programmable RGB light x1, button x1, finely tuned RF circuit, providing stable and reliable wireless communication.
• STRONG EXPANDABILITY: Easy access to M5Stacks hardware and software ecology system  a wealth of sensors, actuators, functional modules, and accessories to choose from, Extremely fast adaptation.

A pin header (or simply header) is a form of electrical connector, often associated with ribbon cable connectors. It consists of one or more rows of pins[1] typically spaced 0.1 inches (2.54 mm) apart, but sometimes 2 millimetres (0.079 in) or 0.05 inches (1.27 mm) is used as well. In addition to being used to connect to a ribbon cable connector, pin headers often also function as recipients for jumpers. The most common jumper spacing is 0.1 inches (2.54 mm) spacing, though 2 millimetres (0.079 in) is sometimes used in smaller products. Pin header connectors are thus "male" connectors (female counterparts do exist, but these are normally just called "header connectors", without "pin") and are mostly used inside equipment, rather than being used as a connector on the outside of the device.[2] Normally pin headers are pin through hole (PTH) devices, but surface-mount technology (SMT) versions of one and two row pin headers also exist. In the latter case the solder sides of the pins are simply bent on a 90 degree angle so as to be soldered to a solder plane. On single row pin headers the pins are bent alternating to one side or the other, on dual row pin headers the pins are simply bent outwards. If pin headers are optional, the PTH variant is often chosen for ease of manual assembly. Pin headers can be either straight or angled. The latter form is often used to connect two boards together. Pin headers are cost-effective due to their simplicity. Headers are often sold as long strips (typically 40 pins for the dual row versions) which can easily be broken off to the right number of pins. Pin headers with a plastic guide box around them are known as "box headers" or "shrouded headers" and are normally only used in combination with a ribbon cable connector. A notch (key) in the guide box normally prevents placing the connector (polarised by a "bump" on one side) the wrong way around.[3] In absence of a pin 1 designation on the header, one or more pins in the header may be removed or clipped to indicate a key for correct orientation. If a designation is missing from the header, the PCB may have a marking indicating orientation (often the solder pad around the hole of pin 1 of a PTH header is square rather than round).