Creative Healthtech Pvt Ltd Gautam Budh Nagar, Greater Noida, Uttar Pradesh

  The x ray film viewer has electrical safety codes for high & low voltage system. The theatre is to be equipped with a 2 plate X-ray viewing screen. It is designed to provide flicker free luminance for the film viewing purpose. It is installed flushed with theatre wall for hygienic and ease of cleaning purpose. The X-Ray viewing screen is designed for the purpose of front access which is supplied in Delhi NCR, Gurgaon, Noida and all over Indian hospitals as per customers requirements. It is illuminated by 4 pieces of high frequency fluorescent lamps and the dimming is controlled by the usage of dimming ballast with the PCB that is mounted inside the box. The diffuser enable to diffuse the light evenly and to provides enough luminance for x-ray film viewing. It is made of high quality opaque acrylic sheet. The film is holded firmly by using spring – loaded clips for ease of mounting and demounting. The body is built by using electrolyzed steel with powder coating.

Compact surgical scrub sink should be designed for use in OT complex providing Surgeons with a convenient sink for pre – OT scrub up. Each fixture should be fabricated from heavy gauge type 304 stainless steel and should be seamless welded construction, polished to a stain finish. The surgical scrub sink should be provided with a front access panel which should be easily removed for access to the water controlled value, waste connections, stoppers and strainers. Hands free operation should include infra red sensors with built-in range of adjustment. Thermostatic mixing, valve control should be located behind the access panel and maintain constant water temperature. User defined setting of 1,3,6 to 10 min are available.This timing should be adjustable to meet individual application requirements. Provided with infrared sensors, thermostatic control taps with fail safe temperature controls. All units should have reduced anti- splash fronts. Foot operated switch should be there.

The storage unit can be made with 1.50 mm thick EGP Zinc coated steel panels, stainless Steel panels, high pressure laminate panels. The hospital storage unit will be divided in 2 equal parts and each part will have individual glass doors with high quality locking system. Each part will be provided with glass racks.The view window of specified size shall be providing consisting of: Double insulated fixed glazing with not less than 5mm thick toughened glass. Window frame shall be powdered coated Aluminum of approved shape flush mounted with wall paneling. Motorized horizontal venetian blinds of powder coated Aluminum strips of vista level or equivalent of approved shade including necessary accessories. The motor shall be of reputed brand approved by Engineer – in – charge. The Venetian blinds should be motorized for 90 degree rotational.

  A leading manufacturer and supplier of stainless steel hospital swing doors that are available in wide range of shapes, sizes and specifications to meet any requirement of our esteemed clients. The hospital swing doors provided by us are subjected to stringent quality checks during the entire manufacturing and delivery procedure to guarantee premium quality and high performance. The stainless steel swing doors are supplied by us, fabricated from optimum quality steel and are available in single or double panel options in Delhi, Noida, Gurgaon and all over India. These are easy to install, operate and maintain doors have placed us among the luminary swing doors manufacturers and suppliers.

Engaged in offering comprehensive range of sealed clean room lights in Delhi NCR and all over India. Our production process is executed out under the guidance of highly skilled and well trained experts. Their vast industrial experience and extensive knowledge enable us to offer optimum range of products in Delhi, Gurgaon, Noida according to the customer requirements. Every hospital requires all the modern culture in their hospital where finishing of hospital building is first thing in this competative world. Sealed clean room lights are supplied after taking all the necessory tests for quality purposes in the market.

Pressure relief dampers should be provided in each room to prevent contamination of air from clean and dirty areas. Suitably sized air pressure relief damper should be strategically placed, enabling differential room pressure to be maintained and ensure that when doors are opened between clean and dirty areas. Counter- weight balancing system should be provided in the PRD to maintain positive pressure inside the operation room.Air pressure stabilizers should have unique capability of controlling differential pressure to close tolerance. The pressure relief damper should remain closed at pressure below the set pressure and should open fully at pressure and should open fully at pressure only fractionally above the threshold pressure. The body should be epoxy powder coated as per standard BS colors. First class electrolyzed steel plate should be used for body and with high grade SS304 stainless steel for blades.

Creative Health Tech Pvt Ltd. offers the best and quality Halogen surgical Operation Theatre (OT Lights) to their customers which meet the customer requirement in various configuration of shape and sizes and complete panel. There are some specifications which are given below for the OT lights by creative health tech.Specifications:-Single and double dome lighting systemLight intensity at colour temperature of 4500K will be upto 250000Lux.Colour Temperature : 4300 – 4500KMulti refelector to provides shadow less light at all levels.The light head is constructed as to provide optimum conditions for Laminar Flow.Light field adjustments by sterilesable handle.

The surgeon operation theatre control panel shall meet electrical safety codes for high & low voltage system, wired to the current IEE regulations. The Surgeon’s control panel shall be designed to cope with changing technology & equipment in operating environments. Control Panel is user friendly & ease to operate.The surgeon control panel is “Membrane” type; configured to incorporate all the services that operation room staff required. The fascia is made of superior quality UV resistance membrane with sterilization feature.The Panel should contain 6 or 9 service tiles as below:1. Time Day Clock2. Time Elapse Day Clock3. General Lighting System4. Medical Gas Alarm Panel5. Hand Free Telephone set6. Music controlTime day clock shall be digital type & clocks having high brightness characters for better visibility.Time Elapsed Day Clock shall be digital type & clocks having high brightness characters for better visibilityTemperature indicator shall indicate the room temperature which shall be connected to the local pressure switches of Air-Conditioning System. Indicators are digital type & clocks having high brightness characters, not less than 30 mm in height.

  One operating list board should be provided in each operating theater. It should be made of ceramic having Magnetic properties and should be flushed to the wall of the operating room.

We are offering modular operation theatre, creative healthtech pvt ltd providing state of the art modular operation theatre complete with hepa based laminar air flow system, seamless modular construction, ceiling pendant systems for anesthesia & surgeon, surgeon control panel,x-ray viewer, automatic hermetically sealed sliding door, flooring etc. Modular operation theatre can be constructed in galvanized steel, stainless steel, high pressure laminate with jointless modular assembly. It is fast & well coordinated installation as per architect's requirement. It can be installed in new building or up-gradation of existing conventional operation theatre.

Pre-Fabricated : Touch Control Monitoring

The wall and ceiling panel can be made out of following material as per customer requirement in an operation theater. A) 1.6mm thick EGP steel panels backed by 12mm thick Gypsum. B) Stainless steel SS202 or SS304 panels. C) High-pressure Laminate panels as per EN standard. D) PUF sandwiched panel. The room wall will have two independent surfaces with a minimum opening in between. The external walls of the room will be constructed with solid bricks with cement plastering. The inner surfaces walls will be constructed with 1.60mm thick EGP steel panels backed by 12-mm gypsum board (India gypsum make) these panels will have flame resistance to BS1142 part 3.The inner surface walls will be fixed to the bricks wall with essential supports in an modular operation theatre. There will be minimum possible cavity/gap in between the solid and steel walls. The total distance between the inside and outside surfaces of the operating room will be variable to suit the architect’s layout, but will be sufficient for the flush mounting of equipments.The individual wall panels will be spot welded together at equal intervals to render equal support to the panels. Spot welding will be properly grinded to make the surface leveled. All joints will be filled with metal filler and sanded flush on site ready to receive the plastic finish. Wall panel’s joints will be invisible after the final wall coating is applied.Cavity between the inner and outer walls will be left with minimum obstruction for the possible addition of equipment at a later date and to enable services, pipes, conduits etc. toberun within the cavity.Wall mounted equipment will be flush mounted and sealed into theatre.

Creative Health Tech Pvt Ltd. is devoted solely to manufacturing as well as supplying of the state-of-the-art Operation Theatre Pendants and ICU Pendant. We design the most suitable pendants that have Aluminium structure, thus making it strong, durable and robust. Our manufactured products (OT & ICU Pendants) have managed to occupy a special place due to their high performance, easy-to-maintain and sturdy construction. Available with suction unit, medicine tray, basket, I.V. stand and tool drawer, our efficient OT & ICU Pendants can be purchased at marketing leading price range. We have become a trusted name and carved a niche as an eminent manufacturer of the products. Our pendant designers use quality components to provide cutting edge products that suit the most to the patients. To test the product error free and to meet international market standards, there is a team of experts to carry out the test.

To maintain sterility and the correct air pressure in the room, all doors into and out should be of the sliding, hermetically sealing type called hermetically sealed hospital sliding doors. The door should meet following specifications:Meets international quality & safety requirements. Doors should be wired to the current IEE regulations & BS7971 standardMotor should be DC 24V 70 W brush less DC MotorNoise level of movement should not be more then 60 decibel.Controller should be microprocessor based and be CE marked.Power efficiency should be .95 (in AC 100V full load). The track should be made up of single piece extruded aluminum.Environment temperature should be -20°C to +55°C.Starting time should be able to regulate from .5 second to 23 second & starting speed should be 600 mm per second.Design shall meet HTM 2020/2021 standards. The doorframe is made of high quality anodize aluminum and the door panel are made of compact laminate that it can withstand high abrasion. To ensure efficient sealing of the doors, frames are provided. They will consist of reinforced plasterboard panels faced with the same laminate as of door. The door seals of all four edges in the closed position & shall be surface installed type.The track of the door is constructed with high quality door lock with aluminum extrusion, fixed firmly to the walls. Nylon runner guides shall be fixed to the door in such a way they do not obstruct trolley movement through the door.The doorframes shall be edged with an aluminum extrusion & with concealed fixings that are adjustable during installation to ensure a 100% hermetic seal is achieved. 

To maintain sterility and the correct air pressure in the room, all doors into and out should be of the sliding, hermetically sealing type. Design shall meet HTM 20202021 standards. The doorframe is made of high quality anodize aluminum and the door panel are made of compact laminate that It can withstand high abrasion. To ensure efficient sealing of the doors, frames are provided. Hermetically sealed sliding door or operation theatre door will consist of reinforced plasterboard panels faced with the same laminate as of door. The door seals of all four edges in the closed position & shall be surface installed type.

A Hatch Box is provided by us to remove waste materials in whole area of hospital like in operation theatre and all over the dirty linen areas. Each Hatch box is equipped with two doors and the doors are operated electronically and it is designed like that only one door should be opened at single time. The UV light (Ultraviolet Light) is installed in every hatch which is designed like that it is kept on during closing of both doors and it will automatically turn off in case of opening any single door also. It has indicators also on the both side of OT so that every status of open and close can be monitored from the both sides.

  Creative Health Tech provides the wide range of scrub stations for operation theatres, ICU, wards and instruments. Despite of standard surgical scrub sink for surgeons, we are providing mini scrub stations for various use in hospitals, nursing homes, Labs, hotels etc in Delhi, Gurgaon, Noida and all over India. These scrubs are in stainless steel operated automatic by sensors, Elbow operated, foot operated for use in ICU/OT complex providing Surgeons with a convenient sink for pre – OT scrubs up. Each fixture is fabricated from heavy gauge type SS304 stainless steel and should be seamless welded construction, polished to a stain finish. All units will have reduced anti- splash fronts. Foot operated switch should be there.

The ceiling filtration system should be designed to ensure unidirectional distribution of sterile air with differential flow velocities decreasing from center to perimeter of the surgical theatre to ensure the cleanliness of all the area covered by the airflow. The ceiling system should be quipped with HEPA filters with different performances according to their position in the ceiling to achieve different flow velocities.The complete filtration ceiling system should be factory assembled its holding structure, Filter frames and top plenum should be made of AISI 304 stainless steel. Filtration ceiling system should have HEPA filters according to EN 1822.The filtration ceiling system should have flow equalizer to achieve uniform & constant air distribution over the whole surface it should also have connection for surgical lamp to be fitted in place of any filter. The size of Planair will be 1800mm X 1800mm, 1800mm X 2400mm, 2400mm X 2400mm, 2400mm X 2800mm, 2800mm X 2800mm, as per theatre size.