A&D Instruments India Private Limited Udyog Vihar, Gurugram, Haryana

Type : Wrist Bp Monitor

Feature : Accuracy,Digital Display,Highly Competitive,Battery Indicator,Light Weight

Measurement Range : 20-280mmHg,20-285mmHg

The UB-543 is an upgraded model with the new function of "Correct Position Guidance" and an upgraded memory for 2 person use (60 x 2). Once the user has settled upon their body position for blood pressure measurement, the UB-543 will detect the user's wrist position and guide the user to an appropriate level with blue and orange signals. Two independent memories (60 x 2) will help record data for two people, divide morning and evening results, or divide results prior and after starting a course of medicine.  

Understanding vehicle behavior under real driving conditions is essential to optimizing the chassis and powertrain design. Ever-growing requirements for vehicle performance and fuel economy create many challenges for vehicle dynamics research.The Wheel force Sensor (WFS), part of A&D’s Vehicle Measurement System, can perform high-accuracy real-time measurementof forces (Fx, Fy, Fz) and moments (Mx, My, Mz) acting on the wheel hub under dynamic conditions. The WFS uses distributed force measurement and model-based decomposition in the digital signal processor (DSP) for obtainingindividual force and moment components. This method provides extremely low cross-sensitivity, interference and temperature sensitivity, while maintaining a high sampling rate. In addition to providing high accuracy and response rate, the WFS is alsocapable of compensating for tire uniformity characteristics in real time to provide the ultimate force and torque measurement.The WFS Wheel Force Sensor measures the six-component forces of a vehicle in dynamic conditions.     Highlights Six-axis force measurement- Forces (Fx, Fy, Fz)- Moments (Mx, My, Mz) High accuracy: ±0.1% High resolution: 1/4000 Light weight: 3.14 kg 10kHz sampling rate Maximum operational speed: 200km/h Rotary type transmitter and rotary encoder installed inside bearing Operating temperature range: −40°C to 100°C   Distributed Force Measurement The distributed force detection method uses four-element strain gauges. These specially-designed strain gauges are arrangedfor heat balance within an extremely small area to form a bridge circuit that eliminates the influence of heat gradients, temperature changes and cross-talk interference.

We are offering weighing scale .

Type : Weighing Scale

Application : Weighing Goods, Industrial Use

Weight : 10-20kg, 20-30kg, 30-40kg, 40-50kg, 50-60kg, 60-70kg, 70-80kg, 80-90kg, 90-110kg

Color : Blue, Creamy, Green, Grey, White, Light Silver, Dark Silver

Voltage : 110V, 220V, 280V

Condition : New, Used

Power Source : Battery, Electric

Power Supply : 1-3kw, 3-6kw, 6-9kw

Feature : Optimum Quality, Simple Construction, Stable Performance, Standard Dual Display, Quality Tasted, High strength

Weighing Capacity : 100kg, 10kg, 20kg, 2kg, 500gm 1kg, 50kg, 5kg

Brand Name : A&D

Driven Type : Digital

Dimension (LxWxH) : 198mm x 294mm

Condition : New

Features  High cost-effectiveness  Big LCD 25mm in height  Multi power supply Alkaline C type battery: battery life 180 hours (LC 350ohms x 1) battery life 70 hours (LC 350ohms x 4) Optional AC adapter  F1, F2 selectable function keys  Load cell 350 ohms x 4  Optional stand available  Universal Flexi Coms UFC allows you to customize the protocol of the printing format as well as outputting the data with RS-232C  Multi interval 2 weighing ranges selectable  Accumulation Function Accumulative data is stored into memory automatically or manually  Comparator Function Upper/Lower, HiHi/Hi/OK/Lo/Lolo & comparison Comparator output to optional relays  Simple batch weighing Automatic batching and customer programming capability  Buzzer function  Code memory function 

Features  Simultaneous and chronological recording of environmental and weighing data  Four kinds of environmental data: Temperature, humidity, barometric pressure, and vibration Large memory capacity of 10,000 data sets Instant data saving to a PC requiring no special software  Real-time transmission mode  No battery required when connected to either a weighing instrument or a PC  Power-saving function when operated on batteries  Remaining battery level indicator  Three types of RS-232C cables and a USB cable provided as standard  Primary data mode to display only two data items of your choosing  Trend graph mode to display chronological changes using graphs  Interval time setting for environmental data recording  Compact, portable dimensions of 127 (W) by 90 (H) by 36 (D) mm IP65 dust and waterproof construction   

Power Supply : Two LR6 (AA) batteries, RS-232C, or USB

Dimensions : 127 (W) × 90 (H) × 36 (D) mm (including the protective cover)

Weight : Approx. 280 g (including batteries and the protective cover)

Features  Easy operation by following step-by-step guidance on a color touch-panel screen  Daily balance check to confirm that the balance meets proper conditions for use Periodic balance check including tests for repeatability, accuracy/linearity, and eccentricity error Quick glossary for periodic check items Minimum weight calculation according to the United Sates Pharmacopeia (USP) standard  Uncertainty calculation of balance calibration based on seven uncertainty components  Documentation of daily/periodic check results by either outputting to a printer or saving in a USB flash drive in PDF report formats  Documentation of calibration results (with expanded uncertainty) by saving in a USB flash drive in PDF report format  Assessment of measurement environment using AND-MEET*1 with the BM series Remote balance display and control  Date and time setting  Adjustable LCD brightness  Stand attachment and touch pen with holder to make operation easier  Two USB*2 and three RS-232C interfaces Three kinds of RS-232C cables as standard 

Features  Dual interface – RS-232C and USB connections Large memory of approx. 5,000 weighing data sets Internal clock to save the date and time Pocket size of 55 × 103 × 16.5 mm IP65 (with the casing cover) No battery required

Features  Ultimate protection against the effects of condensation as well as water – both IP69K and IP68 compliant  Streamlined construction for easy cleaning of food-processing residues  Stainless steel weighing pan, frame and load cell*  Rugged and adjustable (0º, 30º, 60º or 90º) indicator bracket Touch sensitive capacitive keys to prevent damage from sharp objects Auto-tare function to facilitate consecutive check weighing  Counting mode function Bright, multicolored LED display with 5-step comparator lamps Auto power off function Three sizes of base units, which are also available separately  Pole stand attachable to either the short or long side of the platform  The display unit available separetely as an IP69K indicator for high pressure washdown

The VMS utilizes A&D's ADX controller to measure signals from the wheel force sensors (WFS) and ECU in an integrated way. This complete measurement system collects and synchronizes a wide range of signals that are typically measured separately and processes the integrated measurement data to calculate road slope, road friction coefficient μ, and other parameters under conditions such as snow-covered roads. We make measurement software by MATLAB/Simulink, so we can customize calculation logic and CAN settings to build systems that meet users' requirements.  

Features  Data transmission to any application such as Excel, Word, and Notepad No driver software required Internal clock to transfer the date and time at the same time Pocket size of 55 × 103 × 16.5 mm IP65 (with the casing cover) No battery required  

Weight : Approx. 60 g

Brand Name : A&D

Features  Date and time printing function (built-in calendar/clock)  Cumulative memory function (Memory stored even if the power supply is switched off.)  Internal battery provides calendar/clock and cumulative  memory function back-up for approx. 10 years.  Cumulative/statistical calculation functions by code/ input channel  Print modes* : Random, Dump, Interval, and Batch  Print format modification function using the operation keys (in the random print mode)  Connectable to external displays (up to 3 devices) with a current loop output (channel 1 only)  Up to 4 data output devices including indicators (AD-8118C-02 required) can be connected to a single AD-8118C printer.  Receives input signal via a current loop (maximum length of approx. 100m) or RS-232C (maximum length of approx. 15m)

Features  With a length of 210mm, the tweezers allow a weight to be placed in a weighing pan without having to put a hand inside the chamber. This prevents convection flow that is normally attributed to heat coming from the hand.  Each tweezer is made from austenitic stainless steel (SUS304), therefore heat from the hand is unlikely to be transmitted to the weight via the tweezers. This is especially effective for the precise measurements required of analytical balances.  Tips of the tweezers are covered in resin to prevent the weight from slipping. The hilt is also covered with resin for easy gripping.

Material : Austenitic stainless steel (SUS 304)

Length : 210mm

Features Repeatability as high as 1% of the measured value (by S.D.) even with low viscosity sample fluidsShear rate changes by controlling the sensor plate vibration amplitudeEasy setup/cleaning and very quick measurement (stabilization in 20 seconds)Wide continuous measurement range (max. 0.3 to 25,000 mPa·s)Little interference to the sample fluidPossible to measure fluids in motionComes with a special controller for:   - Automatically changing the amplitude (shear rate) and capturing data in the manner set by the user   - Real-time graphing of viscosity variation with time, temperature, as well as shear rate   - Saving results (in CSV format) and graph screens (as JPEG images) in USB flash drives

- This model is a highly accurate, general-use type - Exclusive for use as a torque meter by distributed force sensor method - Rated torque: 200 Nm to 5 kNmTotal accuracy: 0.03%Maximum number of revolutions: 12,000 rpm to 10,000 rpm

Laboratories are typically kept at a constant temperature by air conditioning. Contrary to what you may believe, a strict temperature control can adversely affect the stability of a micro analytical balance when the air conditioning causes strong air circulation and minute repeated temperature fluctuations around the set temperature.   Features  Shields a highly sensitive analytical balance from breezes and minute temperature changes caused by air conditioning or people passing by.  Consists of antistatic plastic panels to minimize the effect of static electricity on the balance  Possible to pass RS-232C and AC adapter cables through two guides at the bottom of the back side  Ready to assemble and easy to move from one location to another

AD1683 static eliminator, which incorporates a high-voltagepower source, is a DC power-operated small-size device which caneliminate static electricity from charged objects without the need of anexternal high-voltage power source.Since this static eliminator is compact and lightweight with no fan(no breeze is produced)and requires no high-voltage wiring, it is very easy to handle.Being of a DC type, it has a remarkable ability for generating ions.     Features  Can be easily and safely installed because they require no high-voltage wiring.  Being of a DC type, this static eliminator has a remarkable ability for generating ions and can be used forelimination of static charges from quickly running or highly electrified workpieces.  Little or no reverse charge is induced by irradiated ions because of its excellent ion polarity balance.  Achieves static elimination with a high degree of efficiency regardless of the polarity or the potential of the charged object.  Suited for static elimination in narrow and remote places because of its lengthy ion irradiation distance.  Produces only a little amount of ozone thanks to its high ion generation efficiency.  A current limiting circuit is incorporated in the ion generating electrode to reduce the possibility of electric shock  Being of a DC type, this static eliminator, unlike PULSE-DC, involves no swing in surface potential of the charged object.

Vibration amplitude made adjustable to change the shear rate Easy setup and very quick measurement Wide dynamic range of measurements (max. 0.3 to 25,000 mPa·s)

Features Connects to A&D’s balances and scales using either RS-232C or current loop  Includes an AC adapter and a communication cable that matches your instrument  Recognizes the balance/scale baud setting automatically  Large and bright VFD display

Features  Displays weighing data Remotely controls a weighing instrument with key operations (no access to the internal settings) Outputs weighing data to another external device such as a PC or printer via the RS-232C connection Optional BCD, comparator, and analog outputs available Can be panel-mounted

Contents of the introduction  Charging Time: Approximately 15 hours  Battery type: Nickel-Metal-Hydride (Ni-MH)  Function: Charging with timer function for automatic stoppage  Output Cable Length: Approximately 1 meter

DisplayTouch panel system STN 5.7 inch color liquid crystal Waterproof (IP-65) CPU boardCPU SH4, OS RT-OS, SD RAM 64MB, Memory 64MB Standard interfaceLAN (Ethernet) (10Base-T), RS-232C/422/485, USB, RUN output Individual I/O board installation (up to 4 slots)Load cell input, Analog I/O, Pulse input, Digital I/O, Relay output, Etc. PowerAC85V-250V 50/60Hz approx. 30VA Unit(WxHxD) 192x144x191mm