Bhambra Glass Concept DLF Phase III, Gurugram, Haryana

This Machine have a heavy duty main base, fabricated with MS Plates. This Machine is suitable with aries grinding and flat edge grinding ( wet type ). Table Size : 7 X 4 ft., with fully fabricated from MS angle and Caster wheels fitted on the table for easy movement of glass with one water tank 4 X 2 ft. and with water tank, 6.5 HP power consumption, 10 X 10 ft. area required, with electric panel.

This Machine is designed for grinding irregular peripheries and hypotenuses on flat glasses. The processed glass is absorbed onto a vacuum sucker. A spinning disc or an independent satellite disc, which is driven by an auxilliar motor enables the grinder to work moveably on irregular edges of flat glass.

Its a semi - automatic Outer - Round shape Edging Machine for the flat glass. It can process the Bevel Edge, Round Edge, Flat Edge. OG and other Shape of Edge by using different wheel. It's a ideal Processing Machine for its Easy Operation and Wide Proceesing Range.

This multifunction washing machine is special made for washing the Flat Glass and Microcrystal Glass. It adopts the synchronous lift and lower structure. Middle-pressure dry and knife, can wash any thickness glass from 3-25 mm. Adjustable speed, constant performance, reliable and durable. Besides it has special design. Whole protecting cover can moving forwards and backwords in straight-line sliding rail.

This Machine is used in Straight - Line Bottom Edge and 45° Angular grinding for the different size and thickness flat glasses. Coarse grinding and fine grinding, polishing complete in one time. Digit shows the thickness of glass. Speed can be adjusted by the step - less regulator.

Thickness : 3 - 25 mm

This Machine is used in Straight - Line Bottom Edge and 45° Angular grinding for the different size and thickness flat glasses. Coarse grinding and fine grinding, polishing complete in one time. Digit shows when adjusting different processing thickness glass. The front wheel head will simultaneously move with the front splint. It shows the advantage of structure advanced, and high efficiency.

Weight : 3 T

Voltage : 380 V, 50 Hz

This Machine is used in Straight - Line Bottom Edge and Bevel Edge Grinding for the flat glass. Bevel Edge's Coarse grinding and fine grinding, polishing, once - shape wheel bottom edge grinding complete in one time, using the Direct - Connect Wheel Motor.

This Machine uses the air- compresser to drive the sand into the Sand Blasting Gun. It can be applied in different Metal, Ceramic, Stone, Plastic's Flat Sandblasting or 3D Carving.

The Machine use the pneumatic set to clamp the glass. Upper Drill move first then lower drill move. Automatic Clamping the glass, Worktable rise by cylinder, Wide range of processing.