Clarifier Dealers in Behrampur, Gurugram

We export and Supply the Tubedek that is a Traditional sedimentation tank and offers excellent solution for variety of municipal, industrial and wastewater applications. The Tubedek is a PVC tube settler, which offers enhanced capacity for settling suspended solids in a fractional area. The Tubedek uses Munters technology and can be installed in existing as well as new tanks. Advantages : Save Space (footprint Area)Reduce Annual O&M CostReduce Civil CostSave power Salient Features : TUBEdek increases the capacity of a clarifier, improves the resultant effluent and increases the stability of the process in the event of surges of other process upsetsTUBEdek increases the effective area of a basin (by 5.5 m2/m2 for a 500 mm deep module)and decreases the effective particle settling distance drasticallyTUBEdek enhances the particle agglomeration and growth, bringing the particles into closer contact with each other at the bottom of the tube. This is aided by the v-shape of the tubes and the counter-current flow of the incoming effluent and receding solids Applications : For effective settling in potable and industrial water treatment plantsFor elective settling at primary and secondary stages of Wastewater TreatmentFor maintaining the required solid concentration in the sludge blanket type Anaerobic DigestorFor ash handling projects the TUBEdek is ultimate solution for efficient settlingEffecting Settling of suspended and Settle able Particles in Rain water HarvestingClarification of raw river water in water treatment plantsClarification of process water from coal fines in coal washeriesClarification of wasterwater from wet scrubbersMineral processing Industry

• 60˚ slope : 11 m2/m3. 55˚ slope : 13 m2/m3: 1.5 cm.
• 120 X 44 mm: HEXAGONAL-CHEVRON
• approx 75 kg/m3.: STANDARD 500mm 5.5 m2 settling area/m2. 1000mm 11 m2 settling are Other heights upon request.
• PVC: 55˚C (depends on the load and the kind of supporting structure.
• (R-1) X 127 mm + 176 mm; where R = number of profile rows.: W X L X H <= 0.6m3 ; otherwise Lifting aid is required for moving the blocks.
• to be adapted to the distance of supports in such a manner that the block is supported by 2 beams,: Distances at max.1000mm.Larger distances possible if the blocks are also supported by T sections.
• minimum 60mm: 2 to 3 times the separator volume.

PVC tube settlers for solid liquid separation in water and wastewater treatment plants: Named as TUBEdek, it is a very high efficiency solid-liquid separator. This is due to the fact that its shape is hexagonal-chevron type that has got highest efficiency of separation among all other shapes available i.e. square, rectangular or hexagonal. Its area of application includes primary and secondary settling in water as well as wastewater treatment plants with any type of secondary treatment. It is also being very successfully used along with anaerobic digesters, to control the outflow of sludge and enhance gas production. Traditional sedimentation tanks or clarifiers are large structures , occupying much valuable space , are perceived as high investment cost items. Attacking the very crux of this problem, MM Aqua’s TUBEdek is a PVC tube settler which offers enhancing capacity for settling of suspended solids in a fractional area. Using Munter’s technology, TUBEdek provides the most economical way of improving clarifier performance. Its major application areas are municipal, industrial and wastewater treatment. TUBEdek can be installed within settling tanks (both existing & new). TUBEdek settling media helps to reduce the amount of suspended solids in carrier fluids ; thus improving effluent quality ; which in turn improves the efficiency of existing plants. Moreover, with TUBEdek, new clarification tanks can be designed in smaller size vice-versa maintain the same performance level, at less cost. The use of TUBEdek leads to the formation of large settling areas and small sink paths. The TUBEdek model, FS 41.50 is easy to install in any shape of clarifier; its Hexagonal-Chevron shape is the most ideal for effective settling with or without coagulation or flocculation. High settling surface area (11 and 13m2/m3) leads to a very small clarifier size and the detention time requirement is also very low when compared to conventional clarifiers. We have our structure framed keeping the Customer’s Interest in mind. We work on 3 L concept for economic solution and 3R concept for efficient solution. 3 L Concept:   Low Initial Capital Costs Low Operating Costs Low Energy Cost/Consumption 3 R Concept:   Reliable Performance Resistance to Hydraulic and Organic Shock Loads Robust construction Features:   Increases the capacity of Clarifier Increases the effective surface area of basin Decreases the effective particle Settling distance drastically It enhances the particle agglomeration and growth, bringing particles into closer contact with each other at the bottom of the tube Unique hexagonal chevron configuration for superior settling applications