Electrodes Dealers in Gurugram

• Diameter: 4”
• thickness: ½”

Non Linear Carbon Discharge Resistor Type Discharge Rods are used to discharge dead system having limited fault levels and also to discharge the static & induced charges in the dead system or equipment, particularly in transmission lines, cables, transformers, reactors, large bus bar systems, switch-gears etc. The earthing lead is made up of special highly flexible braided copper cable with transparent sheath. Copper Hook of 4� dia of ½� thick copper rod & Earth End Clamp of special alloy are provided.

• Type: Electrolytic
• Certification: CE Certified
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1 Year

Based in Gurgaon, Haryana we are one of the most renowned manufacturers and suppliers of Electrolytic Gel Earthing System. Our Electrolytic Gel Earthing System does not require any extra maintenance. It is eco-friendly in nature and prevents any adverse effect on the soil or round water. The gel and the backfill compound are 4% soluble in water so that leaching is very minimal. We welcome bulk orders with an assurance of in time delivery.   Properties : Reduces resistance to earth Perform in all soil conditions even during dry periods Does not depend on the continuous presence ot water/Not require regular watering Require no maintenance/Maintenance Free System Maintain constant resistance for the life of the system Does not adversely effect soil or ground water NABL Certified Restriction of Hazardous Substance (RoHS) Complaint Life more than 30 Years   Electrolytic Gel Maintenance Free Earthing System : To protect Human Life, Equipments, Building-Industry, Power Supply, and Power Generation Equipments etc from any electrical hazard, we have to need Good Earthing System at place. The Good Earthing System should be stabilizes circuit positional w.r.t ground and limit the overall potential rise, protect the things related and nearby the place from any type to electricl hazard, provide the low impedande path. Through extensive research and development of the electrolytic gel grounding concept,BTI have designed hazard by using the Eco friendly different type of backfill compounds. BTI Electrolytic Electrode effectively utilize a hygroscopic process to acquire mositure from the atmosphere. The moisture & the nontoxic chemical inside the electrode react and create an electrolytic solution. This electroytic solution leaches into the surrounding soil through ports that have been positioned in the electrode. This process improves the soil conductivity and dramatically reduces electrical resistance between the electrode and the earth. Best quality & high conductive electrolytic conductor and experienced technical qualified BTI installation team.   Characterstics : Hot Dip Galvanized Electrode for corrosion protection. 100% EC Grade Pure Copper Electrode. Bonded Copper Rod Electrode UL Listed. Designed to protect human life, equipments, machineries etc. from earth related hazards & leakage Current. Maintenance Free, Easy to install at site & Long Life product. Crystalline Conductive Mixture (CCM) filled inside the electrode to increase the conductive properties.

We offer welding electrodes - description: hydrogen controlled iron powder heavy basic coated high quality electrode for crack resistant, reliable welds and excellent toughness values at low temperatures on unalloyed & low alloyed steels, high tensile fine grained steels upto (-) 40° c, ship steels & offshore work. Low moisture absorption properties (lma- type). Applications: tough & reliable x-ray quality welds on cast steels, low alloy, high tensile steels…pressure vessels, tubes, cement kilns, heavy equipments, machine frames & chassis. We are leading manufacturer supplier and exporter for welding electrodes, steel wires to usa, uk, america brazil ,mexico,colombia ,argentina ,peru ,venezuela ,chile ,guatemala ,ecuador , cuba ,haiti ,bolivia ,honduras ,paraguay ,nicaragua ,el salvador ,costa rica ,panama ,uruguay, nigeria ,egypt ,south africa ,algeria ,angola ,morocco ,sudan ,kenya ,ethiopia ,libya ,tunisia ,tanzania ,ghana ,ivory coast ,dr congo ,cameroon ,uganda ,zambia ,gabon ,mozambique , botswana ,senegal ,chad ,equatorial guinea ,congo ,zimbabwe ,burkina faso ,mauritius ,mali , namibia ,south sudan

• Application: In High Voltage Applications
• Type: Non Linear Carbon Type
• Features: Highly Durable, Optimum Strength
• Cable Type: Flexible Copper Cable
• Use: Industrial
• Finishing: Polished

Non linear carbon discharge resistor type discharge rods are used to discharge dead system having limited fault levels and also to discharge the static & induced charges in the dead system or equipment, particularly in transmission lines, cables, transformers, reactors, large bus bar systems, switch-gears etc. the earthing lead is made up of special highly flexible braided copper cable with transparent sheath. copper hook of 4” dia of ½” thick copper rod & earth end clamp of special alloy are provided. Maininsulation : 'f' classto is, bs & iecs pecifications For dimensions of insulated rods please refer specifications of insulated sticks in the beginning of electrical safety.   Features Discharge head fitted in the discharge rod Extension handles to extend the length 4" dia copper hook for bus bars Special waterproof carrying cases Theory for controlled discharging When discharging inductive apparatus (transformers, reactors etc.) controlled discharging must be used. we provide non linear carbon discharge resistor for this purpose which prevents the lightning impulses appearing across the equipment being discharged. while discharging inductive loads the emf induced across the object is directly proportional to rate of change of flux i.e.   Since l (inductance) is usually large and the discharging takes place in microseconds, a huge impulse voltage resembling a 1.2/50 μsec pulse appears across the object (a typical waveform is shown in fig), thus subjecting the equipment under discharging to a lightning impulse voltage.   To overcome this non linear carbon discharge resistor is employed. the reverse temperature coefficient of carbon facilitates controlled discharging. as the current flows through the carbon resistance, this increases the temperature and by virtue of reverse temperature coefficient, the resistance falls. therefore as the current is flowing, voltage is reducing and since resistance is also reducing acontrolled discharging takes place.   The do fuse operating rods has and innovative design for fitting, removing & changing drop out fuses. the do fuse. operating rods has a spring loaded fuse jaw which accepts the do fuses easily and ensures that it does not fall while fitting or removing. the entire operation is carried out from ground level comfortably.   This method saves considerable amount of time and effort for fuse replacement and provides extremely safe procedure as compared to the conventional procedures.

As a trusted name, we make use of only premium packaging material to pack the products in order to ensure their complete safety during transit. Moreover, our packaging experts strictly check the same. Our quality analysis system is headed by experienced quality auditors who check each and every product at different levels. Additional Information : Minimum Order Quantity - 50 Pieces Pay Mode Terms - T/T (Bank Transfer),Other

• Type: Aluminium Cubes

wedge coil aluminium wire w-al99 is 99 % minimum specification. Aluminum (al) is used for deoxidizing and grain refining in steels. It is a strong deoxidizer. It is also used as nitride former and as an alloying agent. Its ability to scavenge nitrogen (n) from steel makes it a useful addition in drawing quality steels, especially for automotive applications. We at wedge have strong willingness to offer best quality steel raw materials. Along with refractories ferro alloys are our one of the most important flagship product range.     aluminum (al) is being used as a deoxidizing element in steels for more than 100 years. Deoxidation of steel with al is common practice today. Al plays an important role in secondary metallurgy. It forms aluminum oxide or alumina (al2o3) alumina and decreases the amount of oxygen in the steel during the production of killed steels.metallic al is the most common addition agent.    at wedge we also supply other forms notched bars, shots, pigs, small ingots, chopped wire, briquettes along with convenient forms such as coiled machine fed wire. Purity of deoxidation grade of al is normally over 95 % with the main tramp elements being zinc, tin, copper, magnesium, lead and manganese.

• Country of Origin: Made in India
• Color: White
• Size/Diameter: 3 mm
• Size: 2.5 mm

• Purity: 99.99%
• Usage: Industrial
• Material: Metal
• Length: 1 9/16 in 40 mm
• Application: Plating
• Resistivity: Corrosion & Chemical resistant
• Performance: Optimum

if two different metals are physically or electrically connected and immersed in electrolyte then some amount of current flows between the two metals. This current is supplied by one of the metals by emmiting metal ions to the conductive environment . This is known as galvanic corrosion which destroys base metals rapidly.magnesium (mg) alloy anodes are having greater driving potential than zinc (zn) or aluminium (al). So that magnesium anodes are suitable for the protection of pipeline, tanks, condensers, water boxes, heatexchangers, ship hulls, boilers and marine structures from corrosion.according to the application and customer requirement we manufacture and supply high potential sacrificial magnesium anode and low potential sacrificial magnesium alloy anode for cp.

a) Solid Copper Earth RodsCopper Strips, Plates and Solid Rods are manufactured from highly conductive EC Grade Copper. They offer great resistance to corrosion. They are ideally used in applications where the salt content in the soil is very high.Size   : 16mm - 2Omm (length as per customer specifications). b) Swaged Earth Rods (250 Microns) Plain Swaged Earth Rods. Tapered Swaged Earth Rods. c) Copper Bonded Earth RodsThey are manufactured from Structural Quality High Tensile Steel Grade 43A to BS 4360. These rods are molecularly bonded with pure EC Grade Copper (99.9%).

Arc welding electrodes are identified using the A.W.S, (American Welding Society) numbering system and are made in sizes from 1/16 to 5/16 . An example would be a welding rod identified as an 1/8" E6011 electrode.

• Diameter: 50 mm
• Thickness: 1.2 mm (Coating)
• Material: Copper
• Shape: Round
• Length Of Rod: 3 m
• Usage/Application: Earthing Fitting
• Technique: Hot Rolled
• Surface Finishing: Nickel finish

• Color: Silver
• Material: GI
• Item Code: EP-01
• Length Of Rod: 4-6m
• Finishing Type: Galvanization
• Thicknesss: 2 to 4mm

Our wide range of CW/MW electrodes are extensively used for low pressure plasma modification in fluidized bed, industrial scale application and others. These are offered at affordable price with proper packaging.

We are listed as the most dependable Welding Rods Supplier from India. Customers from every nook and corner of India are placing huge and repeated orders for the Stainless Steel Welding Rods as per the specifications provided in terms of sizes and dimensions. Moreover, the Electrodes Welding Rods are made up of excellent quality materials that ensure high durability and resistivity to breakage to the products being welded.

With drilling spiral for earthing of mobile objects such as vehicles, power generators, etc. Detachable turning handle. Consisting of: – Turning handle (Part No. 462 058 Military name VG 96953 T10 AB001 Stock No. 5975-12-133-7084) – Earthing pipe (Part No. 462 060

We are instrumental in offering quality Projection Welding Electrodes that are manufactured in compliance with set industrial standards. The Projection Welding Electrodes, offered by us, can be easily installed and provide superior performance. Further, we offer Projection Welding Electrodes in varied specifications to meet the clients̢۪ requirements.

Based in Haryana, we are credible Supplier of ARC Welding Electrodes in the Indian market. ARC Welding Electrodes are used in the welding process with the efficient use of power supply. ARC Welding Electrodes, offered by us, can use either direct (DC) or alternating (AC) current.

  Manufacturing wide range of standard and custom made Electrodesin Cu.Cr., Cu.Cr.Zr., Be.Cu. and Tungsten Copper forSpot and Projection Welding Applications