Gaskets Dealers in Gurugram

• Color: Black
• Usage: Industrial
• Brand Name: CAPTAUTO
• Warranty: 1 Year
• Shape: Round
• Chemical Resistance: Yes
• Condition: New
• Packaging Type: Carton Boxes
• Country of Origin: India

Material: Gaskets can be made from various materials, including rubber, cork, paper, metal, silicone, and fiber materials like asbestos (though asbestos is no longer used due to health concerns). The choice of material depends on factors such as the application, operating conditions (temperature, pressure, and chemical compatibility), and the specific sealing requirements. Shape and Size: Gaskets come in different shapes and sizes to match the mating surfaces they seal. They can be circular, oval, rectangular, or have a custom shape based on the application. Gasket size is typically specified by inner diameter (ID), outer diameter (OD), and thickness. Compression: Gaskets are designed to be compressed between the mating surfaces to create a reliable seal. The compression can be achieved by tightening bolts or fasteners that apply pressure, ensuring the gasket fills any irregularities and forms a tight seal. Types: There are various types of gaskets, including flat gaskets, spiral wound gaskets, ring gaskets, and O-ring gaskets. Each type has its specific design and application suitability. Temperature and Pressure Rating: Gaskets have temperature and pressure ratings that indicate their ability to withstand different operating conditions. These ratings are crucial to selecting the appropriate gasket material and design for the specific application. Chemical Compatibility: Gasket materials should be selected based on their compatibility with the fluids or gases they will come into contact with. Different materials have varying resistance to specific chemicals, oils, fuels, and other substances.

Die Cut Gasket are used to prevent fluid or gas leaks by providing a barrier between two mating surfaces. The gasket must be able to maintain a seal under pressure and temperature changes. Some gaskets can also be used to shield against electromagnetic and radio frequency interference.Common types of gaskets include sheet die-cut & molded. In a sheet die cut gasket the gasket material is a flat sheet that can be cut prior to assembly or is already die-cut from flat gasket material. Important specifications to consider when searching for gaskets include maximum operating pressure & operating temperature. Important size dimensions to consider when specifying washers include inside diameter, outside diameter, thickness or working height, and rated or working load. Common materials of construction for gaskets include Aflas®, Viton,Silicon, Hypalon, EPDM, TPR, NBR, Neoprene.PTFE, PU, SBR & Natural. The hardness rating on a Shore A scale for Gaskets can be 30 ~ 95 Durometer. Exact specifications should be clarified by our engineers, as chemical and physical properties of Gaskets can differ based on manufacturing technique.

• Thickness: 1-10mm
• Width: 0.5-2mm
• Inside Diameter: 0-50mm
• Type: Gaskets
• Material: Rubber

To prevent fluid leakages between two parts.

Buyers can trust us to make delivery of consignments since; we have collaborated with reckoned transportation service providers. Designed and developed using the premium raw material and modern work methods; we guarantee high quality standards and longevity of our products. Also, we make sure that the raw material is sourced from the trusted places.

We offer the quality silicone inflatable gaskets used in pharmacuetical industries.

We are offering cylinder head gaskets. We are bring to you cylinder head gasket for all industries as per buyer specification.

• Size: 50-60inch
• Material: Rubber
• Thickness: 40-50mm
• Certification: ISI Certified
• Feature: Durable
• Finishing: Polished
• Temperature: 200-400 ℃
• Application: Industry Use

We provide Rubber Gaskets for all flanges & pumps as per requirement. We also develop new gaskets as per our customers requirement. These Gaskets, we are offering, are made in compliance with the set standards of quality.

• Packaging Type: Packet
• Material: Silicone
• Thickness: 15 mm
• Color: White
• Shape: Rectangular
• Usage/Application: Industrial

• Type: Flexible
• Color: a
• Finishing: Polished
• Material: EPDM Rubber
• Usage: Industrial
• Pattern: Plain
• Size: Standard

GASKETS are used to prevent fluid or gas leaks by providing a barrier between two mating surfaces. The gasket must be able to maintain a seal under pressure and temperature changes. Some gaskets can also be used to shield against electromagnetic and radio frequency interference.     Common types of gaskets include sheet die-cut & molded. In a sheet die cut gasket the gasket material is a flat sheet that can be cut prior to assembly or is already die-cut from flat gasket material. Important specifications to consider when searching for gaskets include maximum operating pressure & operating temperature. Important size dimensions to consider when specifying washers include inside diameter, outside diameter, thickness or working height, and rated or working load. Common materials of construction for gaskets include Aflas®, VITON,SILICON, HYPALON, EPDM, TPR, NBR, NEOPRENE, PTFE, PU, SBR & NATURAL. The hardness rating on a Shore A scale for Gaskets can be 30 ~ 95 Durometer. Exact specifications should be clarified by our engineers, as chemical and physical properties of Gaskets can differ based on manufacturing technique.

• Type: Rubber Gaskets
• Material: Rubber
• Color: Dark Black, Black
• Condition: New
• Finishing: Polished
• Brand Name: Kesaria
• Application: Fittings Use, Industry Use
• Feature: Durable, Fine Quality, High Strength, Perfect Shape, Rust Proof, Strong Construction, Superior Finish
• Temperature: 50-100 ℃

a gasket is a mechanical seal which fills the space between two or more mating surfaces, generally used to prevent fluid or gas leakage from or into the joined objects while under compression to seal high pressure under static conditions. The gasket must be able to maintain a seal under pressure and temperature changes. Important size dimensions to consider when specifying washers include inside diameter, outside diameter, thickness or working height, and rated or working load. we manufacture a large variety of rubber gaskets of different shapes & sizes from a variety of rubber grades like viton, silicon, epdm, nbr, neoprene, sbr & natural. The hardness rating on a shore a scale for gaskets can be 30 ~ 95 durometer. Exact specifications should be clarified by our engineers, as chemical and physical properties of gaskets can differ based on manufacturing technique.

• Color: Black
• Thickness: 10 mm
• Size: 20 cm
• Shape: Round
• Material: Rubber
• Usage/Application: Cooker Gasket

We are offering head set conversion set gaskets. In case of overhauling full engine all the gaskets components are required which comes in full set gasket unit (engine overhauling gasket unit) while opening top engine head set gasket components are required. it is also known as top set gasket unit half set gasket unit. while opening the bottom portion of the engine, the components required come in conversion set. It is also known as lower engine gasket unit.

• Material: Rubber
• Packaging Type: Packet
• Thickness: 2-6 MM
• Usage/Application: Automobile Industry
• Model No: RB02
• Hardness: 60-70 Shore A

• Country of Origin: Made in India
• Material: Nitrile
• Brand: MASHIO
• Thickness: 2 mm
• hardness: 50 HRC
• Shape: Rectangular
• Usage: Sealing

Nu-Cork uses clean, low density, high-quality granulated "cork", directly imported from reputed manufacturer in "Portugal", combined with "virgin" selective polymers ensuring uniform dispersion & consistent properties conforming to customer requirements using internationally acclaimed high quality environment friendly processes.

Rubber products made are tested in well equipped testing laboratory with latest Rubber testing instruments and full fledged testing of products through dynamic, endurance and cyclic test and are known worldwide for superior quality, achieved only through a policy of continual Improvement

• Brand Name: paradise gaskets
• Place of Origin: Delhi, India
• rubber products: cylinder head gaskets
• Lead Time: depends upon the order quantity
• Packaging Details: high quality packing with good quality container is ensured

We are the main supplier of this product.

• Thickness: 1 mm
• Material: Stainless Steel
• Color: Silver
• Feature: Corrosion-resistance,Anti-abrasive,High durable

It is a liquid material that seals various types of flanges and pipes with threads. We have a wide selection of grades so that you can choose the right one for the condition of the application site.

We are involved in offering a comprehensive assortment of Asbestos Gasket, which can be easily installed. Furthermore, we offer the range as per the requirements of the customers. We are able to cater to our customer in the market due to the excellent quality of our gaskets. Besides, we deliver our products on committed time frame at leading price rates.  

A rubber seal is a device which helps in joining systems or mechanisms together. There are various types of seals used in various applications that have constantly moving equipment, such as the rotating or reciprocating shafts and cylinders that form an essential part of hydraulic and pneumatic systems including seals for windows of cars. Rubber seals are seals made from both natural and synthetic rubber. We are the manufacturer and the supplier of various types of rubbers seals and gasket in India (IMT Manesar - Gurgaon) with best quality, reasonable price and prompt delivery time. We also offer the standard gaskets with high quality rubber material.  Moulded rubber parts are essential in any configuration and build-up of a machine irrespective of the size of the unit. Without washers and seals machines would be dearly handicapped and some would be unable to even perform. The size of a rubber seal could vary, however it is not the size that defines its importance and necessity. A tiny missing rubber component can create havoc in the proper functioning of a machine. All machines and motors use a number of rubber seals and gaskets of varying shapes and sizes. The significance of rubber parts cannot be undermined or ignored. Created from a natural plant extract rubber has made a huge difference to the world. Over the centuries many alternate materials have been devised for other products, rubber however, continues to remain in its place with no alternate or replacement material even coming close.

Rubber gaskets/washers for drum closures are manufactured with the available varieties of synthetic rubbers like that of Nitrile (NBR), EPDM, LDPE (Poly), Neoprene, Silicon, Viton (FKM), Teflon. Sizes of Rubber gaskets/washers:Rubber gaskets/washers for 2" FlangeRubber gaskets/washers for 3/4" FlangeRubber gaskets/washers for" Bung (Plug)Rubber gaskets/washers for 3/4" Bung (Plug) Today, our products have created a separate niche with their functionality and durability in drum closure industries. We encourage a constant quality improvement of our products that has helped us immensely to satisfy our customers in the most unique way. It is perhaps due to these reasons that today whenever industries need rubber gaskets or rubber washers drum closure manufacturers in India they rely upon us.

• Material: Nitrile rubber, Natural rubber
• Color: Black
• Thickness: 1.2-15mm
• Size: 5-60mm
• Shape: Flat, round , square
• Country of Origin: Made in India
• Features: Precise design, Easily to fit, Longevity.
• Item Code: WASR001
• Usage/Application: Water
• Brand: Vinir
• Packaging Type: Polybag

Rubber Gasket & Seals are used to in many applications by automotive & other general industries

* Offering custom molded Rubber Gaskets and Bushes, molded to your specifications. * Made of various materials like NBR, EPDM, Silicone, NR, Neoprene, viton etc. * Designed and manufactured as per given specifications of the client.

We offer Cylinder Head Gaskets.