Level Transmitter Dealers in Gurugram

Application: Online partial discharge measurements detect failures in the stator winding insulation in operation. Online partial discharge measurements can be taken either periodically with a portable partial discharge analyzer or continuously with a permanently installed monitoring system. Partial discharge monitoring is applicable on large hydro-generators or on turbo-generators. TYPICAL FAULTS DETECTIONS Delamination of single conductor to main insulation Delamination of the main insulation Abrasion of the corona slot protection Typical Installation: Partial discharge couplers installed on each generator/ motor phase exit. Shaft and Bearing Vibration for Hydro Generator Application: Shaft and bearing vibration monitors the vibration amplitude to detect wear of bearings, shaft imbalance and misalignment. The shaft and bearing vibration monitoring is specified in the ISO-7919 and ISO-10816 norms respectively. Plain bearings deterioration and failures can be detected using condition monitoring tools such as shaft center path (orbits) and shaft centerline. Shaft and bearing vibration are applicable on any rotating machines such as hydro turbines, gas turbines, steam turbines, pumps, fans, cooling fan towers. TYPICAL FAULTS DETECTIONS Mechanical unbalance Misalignment Damages or wear of plainbearings Misc. tribological issues on plain bearings Typical installation: 2 proximity probes or absolute vibration sensors installed at 90° apart located in the radial direction.  

• Type: 80GHz
• Range: 100 mt
• Brand Name: UWT
• Model: NR3100 Nivoradar
• Usage/Application: Solid & Liquid
• Detecting Angle: 4 deg

• Weight: 5.4 Kg (12 Lbs)
• Number of Channels: 4
• Bandwidth: 35 kHz to 300 kHz
• Sampling Frequency: 3 MHz
• Optional Filtering: High pass 6th order at 100 kHz
• Amplitude Resolution: 12 bits
• Dynamic Range: 120 dB

The AE-150™ is designed to detect and localize Partial Discharge activity by correlating acoustic and electric sensors' data. The AE-150™ has many acquisition modes, each used for detecting and locating Partial Discharge activity in a transformer. The AE-150™ unit is mounted on the transformer tank using its powerful magnets that also hold four acoustic sensors. Acquired data is sent to Mirador-Tx software where all advanced positioning functions are implemented. This cutting edge software allows easy data interpretation, reporting and monitoring.   Features Easy to install and use Portable, battery-operated, wireless data transfer, weatherproof Mirador-Tx software allows automatic configuration and 3D positioning Simultaneous processing of AE and PD signals NEW: Monitoring Feature!

MJK offers a full series of water level transmitters designed for immersion in open tanks, wet-wells, ground water and reservoirs. The water level transmitters are designed for measurement under rough conditions in all water and wastewater applications with large concentrations of sludge and suspended solids.   The Expert Hydrostatic Level Transmitters line consist of these product types: Expert Hydrostatic Analogue Submersible Level Transmitters Expert Hydrostatic Digital Submersible Level Transmitters Level Transmitters for clean water applications Level Transmitters for waste water applications Expert™ Hydrostatic Level transmitter 700 The MJK Expert™ 700 Level Transmitter has a small external diameter - 16 mm - and is made of 316L stainless steel. The transmitter is designed for measuring levels in water wells. The MJK Expert™ 700 is an accurate 2-wire transmitter with a piezoresistive measuring system with direct air pressure and temperature compensation and built-in surge protection. Expert™ Level transmitter 700 series has the following features: Application: Water Wells AISI 316L Housing Stainless steel (1.4404/AISI 316 L) diaphragm Ø 16mm outer diameter Programble zero point and span with flexible measuring ranges Measuring ranges between 0 – 30 m and 0 – 100m Measurement and stability accuracy better than ± 0.5 % Output signal 2-wire 4 - 20 mA (700) or Modbus® RS 485 (700 Digital) PE Cable Ligthning surge resistance Expert™ Hydrostatic Level transmitter 7060 Expert™ Level transmitter 7060 series is very popular level transmitter, sturdy design made for level measuring in waste water aplications around the world. The 7060 transmitter has piezoresistive measuring system with direct air pressure compensation through a tube in the cable. The transmitter is suitable for measuring level in wastewater pumping stations, tanks and containers at sewage plants, water works, as well as in industrial plants. Expert™ Level transmitter 7060 series has following features: Application: Wastewater and process water PP Housing reinforced with iron bars Stainless steel (1.4404/AISI 316 L) diaphragm Ø 60 mm outer diameter Programble zero point and span with flexible measuring ranges Measuring ranges between 0 – 2 m up to 0 – 300m Measurement and stability accuracy better than ± 0.25 % Output signal 2-wire 4 - 20 mA (7060) or Modbus RS 485 (7060 Digital) High pull strength (1000 kg) PUR Cable Expert™ Hydrostatic Level transmitter 7070 Expert™ Hydrostatic Level transmitter 7070 has small external diameter and is made completely in acid proof steel. The transmitter is designed for measuring levels in water wells and drinking water tanks. The Expert™ Hydrostatic Level transmitter 7070 has piezoresistive measuring system with direct air pressure compensation through a tube in the cable. Expert™ Level transmitter 7070 series has following features: Application: Water Wells, Water Storage and Processing AISI 316L Housing Stainless steel (1.4404/AISI 316 L) diaphragm Ø 22 mm outer diameter Programble zero point and span with flexible measuring ranges Measuring ranges between 0 – 2 m up to 0 – 300m Measurement and stability accuracy better than ± 0.25 % Output signal 2-wire 4 - 20 mA (7070) or Modbus® RS 485 (7070 Digital) PT100 for on-line temperature measurement (7070T) PUR Cable Expert™ Hydrostatic Level transmitter 1400 Expert™ Level transmitter 1400 series with improved accuracy for both high and low measuring ranges. The transmitters are approved for mounting in explosion hazardous areas. It has a capacitive measuring system and built-in breather tube for direct air pressure compensation. Expert™ Level transmitter 1400 series has following features: Application: Water Wells, Water Storage and Processing AISI 316L Housing Ceramic diaphragm Ø 22mm outer diameter Programmable zero point and span with flexible measuring ranges Measuring ranges between 0 – 30 cm and 0 – 300m Accuracy better than ± 0.1 % and stability 0.1 %/year 2-wire 4 - 20 mA Output signal PUR Cable Ligthning surge resistance Approvals Expert™ Level transmitters 1400 are approved for use in hazardous areas with the following approvals: Atex: Ex:ia IIC T6UL: Class 1, Division 1 Group A-D Expert™ Hydrostatic Level transmitter 3400 Expert™ Hydrostatic Level transmitter 3400 with improved accuracy for both high and low measuring ranges. The transmitters are approved for mounting in explosion hazard areas. It has a capacitive measuring system and built-in breather tube for direct air pressure compensation. Expert™ Level transmitter 3400 series has following features: Application: Drinking, waste and process water, chemical resistant and can be used in tanks with chemicals such as a range of acids, bases and ferric chloride. PPS plastics housing Ceramic diaphragm, 99,9 % pure Ø 50 mm outer diameter Programble zero point and span with flexible measuring ranges. Measuring ranges between 0 – 30 cm and 0 – 300m. Improved accuracy better than ± 0.1 % and stability 0.1 %/year 2-wire 4 - 20 mA Output signal High pull strength (1000 kg) PUR Cable Approvals Expert™ Level transmitters 3400 are approved for use in hazardous areas with the following approvals: Atex: Ex:ia IIC T6UL: Class 1, Division 1 Group A-D Expert™ Hydrostatic Level transmitter 7050 Expert™ 7050 Pressure Transmitter 7050 has Piezo-resitive measuring principle and absolute pressure measuring system. The Transmitter is very sturdy and suitable for level measuring at pumping stations and at sewage plants, where the cable with the traditional air compensation tube will pass through different temperature zones and moisture can cause reduction of accuracy. Expert™ Level transmitter 7050 series has following features: Application: Wastewater and process water PP Housing reinforced with 6 mm iron bars Stainless steel (1.4404/AISI 316 L) diaphragm Ø 60 mm outer diameter Measuring range 0 – 2 bar (0-10m WC) Measurement and stability accuracy better than ± 0.5 % Output signal 2-wire 4 - 20 mA (absolute) High pull strength (1000 kg) PUR Cable

The Model BAMR34 liquid level transmitter satisfies the demand for an analog communication interface for magnetic level gauge (MLG) applications. The Model BAMR34 transmitter provides a 4-20mA output for most MLG manufacturers and allows for mounting external to the chamber without interrupting the process.

online monitoring system, measuring equipment, power conditioning equipments