Measuring Instruments Dealers in Udyog Vihar, Gurugram

Interfacial Tensiometer is used for precise determination of both surface and interfacial tension of oil against water by ring method to values within + 0.05 Dynes. The surface as well as interfacial tension of oil depends on the purity of oil. If water, sludge, suspended particles are present in the oil the values of surface and interfacial tension of oil will change. The equipment measures interfacial tension of oil in accordance to IS:6104-1971. The equipment is available in automatic as well as manual versions.  

• Type: 80GHz
• Range: 100 mt
• Brand Name: UWT
• Model: NR3100 Nivoradar
• Usage/Application: Solid & Liquid
• Detecting Angle: 4 deg

• Country of Origin: India
• Size: Standard
• Type: Diesel Smoke Meter
• Material: Electronic Equipment
• Application: Industrial
• Color: Red
• Feature: Accuracy
• Voltage: 220V
• Operating Temperature: 10-50D/C
• Automatic Grade: Fully Automatic
• Certificate: ARAI Approved
• Display: Local
• Operated: Diesel Operated
• Warrenty: 1 Year
• Brand Name: ARO
• Weight: 80 KG
• Power: 50 Hz
• Power Supply: 220-230 V
• Resolution: 2%
• Accuracy: 99.99%
• Color: RED
• Brand: ARO
• Warranty: 1 YEAR

• Weight: 5.4 Kg (12 Lbs)
• Number of Channels: 4
• Bandwidth: 35 kHz to 300 kHz
• Sampling Frequency: 3 MHz
• Optional Filtering: High pass 6th order at 100 kHz
• Amplitude Resolution: 12 bits
• Dynamic Range: 120 dB

The AE-150™ is designed to detect and localize Partial Discharge activity by correlating acoustic and electric sensors' data. The AE-150™ has many acquisition modes, each used for detecting and locating Partial Discharge activity in a transformer. The AE-150™ unit is mounted on the transformer tank using its powerful magnets that also hold four acoustic sensors. Acquired data is sent to Mirador-Tx software where all advanced positioning functions are implemented. This cutting edge software allows easy data interpretation, reporting and monitoring.   Features Easy to install and use Portable, battery-operated, wireless data transfer, weatherproof Mirador-Tx software allows automatic configuration and 3D positioning Simultaneous processing of AE and PD signals NEW: Monitoring Feature!

• Model Number: L-Rix 5000/5100/5200
• Brand Name: Anton Paar
• Process pressure absolute: 100 mbar to 16 bar
• Detector: CMOS line sensor; 2048 elements
• Degree of protection: IP65; IP67 / NEMA 6P
• Light source: LED 589 nm
• Ambient temperature: Minus 20 degree Celsius to 60 degree Celsius
• Material of the wetted parts: Stainless steel 1.4404 and 1.4542, gold, sapphire

» Extraordinary accuracy and easiness to use.» Zeroline: length, width, diagonal and now height too are measured digitally with numerical accuracy.» Zeroline can work with any inclination: by pressing the calibration button you create the zero reference plane    even if the car is not in a horizontal position.» Suitable for measuring body / mechanical parts / wheel alignment etc.

Digital Tachometers, products of Koyo Electronics Japan Digital Tachometers TC-V Series TC Series

We are specialized in manufacturing, importing and exporting a wide range of industrial laboratory equipment of medical products such as infrared moisture balance. These are used to measure moisture contents on solids, which are available in powdered form. We provide these infrared moisture balance in customizes from as well as per the needs of the clients.

• Features: Touch Color LCD screen, Auto Mode, Display mode, size mode, Printer built-in-Economic, Full back up of Huvitz Korea, Over 3000 Installations, Most accurate and advanced features
• Model Number: CR1

• Application: Laboratory
• Color: White , Blue , Grey
• Weight: 10-20kg , 20-30kg , 30-40 kg
• Warrnaty: 1 Year , 2 Year
• Material: Stainless Steel , Plastic ,PVC
• Condition: New , Old

With integrable stirring Peltier thermostating unit. Precise surface and interface tension at constant temperature. The new LAUDA Tensiometer TD 3 is used for the automatic measurement of surface tension and interfacial tension as well as for the determination of the density of liquids. The surface materials of the TD 3 are chemically resistant and suitable for almost all fields of application. An important application for the LAUDA TD 3 is the determination of interfacial tension in transformer oils for assessing the ageing, and consequently the insulating properties of transformer oils. Other typical applications are found in the beverage, food and petrochemical industries, with surfactant manufacturers and in pharmaceutics.

Abbemat 200 Food Digital Benchtop Refractometer

The Model BAMR34 liquid level transmitter satisfies the demand for an analog communication interface for magnetic level gauge (MLG) applications. The Model BAMR34 transmitter provides a 4-20mA output for most MLG manufacturers and allows for mounting external to the chamber without interrupting the process.

Belt Tension Gauges, computerized wheel aligner, Engine Stand with Gear Box

COUNTER, encoder, HMI Touch Panel, Plc, Tachometer

Cutting Broaches, cutting cutters, Cutting Tools

measuring equipment, online monitoring system, power conditioning equipments

Pneumatic Tools, riveters, Screw Drivers, sanders, Grinders