Mechanical Bearings Dealers in Gurugram

Intermediate Propeller Shaft Bearing was repaired by RA Power Solutions Pvt Ltd, the detail of repairs are as follows:-  The Intermediate Propeller Shaft Bearing having a standard inner diameter of 505.00 MM and width of 400.00 MM was collected by a RA Power Solutions representative from a Cochin Port of a vessel owned by a company having headquarters in Vietnam. The bearing was badly damaged and Babbitt white metal from the Intermediate Propeller Shaft Bearing was removed by machining process. The bearing was subject to a short blasting process for cleaning, hardness test, and crack check by MPI process. A few hardened spots were observed on the inner diameter of the Intermediate Propeller Shaft Bearing. These hardened spots were removed by a process called scooping. Rebabbitting by a high grade of Babbitt white metal was done. We undertake the rebabbitting of white metal by centrifugal process, which ensures proper bonding between the Babbitt white metal and the steel casing of the bearing. The bearing inner diameter was machined to 504.50 MM keeping the oil gap of 0.50 MM, as prescribed in the manual. The in place machining of the Intermediate Propeller Shaft bearing was also undertaken by RA Power Solutions and the final diameter of the Intermediate Propeller Shaft was maintained, as 504.00 MM. As mentioned above, the Intermediate Propeller Shaft Bearing inner diameter was maintained at 504.50 with an oil gap of 0.50 MM.    Considering the damage to the Intermediate Propeller Shaft it was undersized by 1.00 MM and the final size was maintained, as 504.00 MM instead of the standard diameter of 505.00 MM.   The bearing after Babbitt white metal was assembled by our technicians on board the vessel. The Oil-gap, blue Matching after thorough inspection of the Intermediate Propeller Shaft and the bearing trials were taken and found to be satisfactory.