Medical Electrode Dealers in Gurugram

• Material: Copper
• Length: 0-250mm, 250-500mm, 500-750mm
• Application: Earthing Purpose
• Feature: High Clarity, Proper Working, Smooth Texture, Temperature Maintained, Uniform Finish
• Condition: New
• Finishing: Polished

Based in Gurgaon, Haryana, we are one of the leading manufacturers and suppliers of Copper Earthing Electrode. We use the purest and best quality copper and the most efficient cutting-edge techniques. The copper electrodes we deliver are made up of 100% pure copper. It has high conductive properties due to the crystalline conductive mixture with a pretty nice EC grade. The dimensions are of the exact same value and all the finishes are to the level of perfection.   Features:     99.9% pure copper     EC Grade , High Conductive properties     Pipe in Pipe Technology.     Accurate dimensions     Crystalline Conductive Mixture filled inside the electrode to increase the conductive properties.      Remarkable finish

• Application: In High Voltage Applications
• Type: Non Linear Carbon Type
• Features: Highly Durable, Optimum Strength
• Cable Type: Flexible Copper Cable
• Use: Industrial
• Finishing: Polished

Non linear carbon discharge resistor type discharge rods are used to discharge dead system having limited fault levels and also to discharge the static & induced charges in the dead system or equipment, particularly in transmission lines, cables, transformers, reactors, large bus bar systems, switch-gears etc. the earthing lead is made up of special highly flexible braided copper cable with transparent sheath. copper hook of 4” dia of ½” thick copper rod & earth end clamp of special alloy are provided. Maininsulation : 'f' classto is, bs & iecs pecifications For dimensions of insulated rods please refer specifications of insulated sticks in the beginning of electrical safety.   Features Discharge head fitted in the discharge rod Extension handles to extend the length 4" dia copper hook for bus bars Special waterproof carrying cases Theory for controlled discharging When discharging inductive apparatus (transformers, reactors etc.) controlled discharging must be used. we provide non linear carbon discharge resistor for this purpose which prevents the lightning impulses appearing across the equipment being discharged. while discharging inductive loads the emf induced across the object is directly proportional to rate of change of flux i.e.   Since l (inductance) is usually large and the discharging takes place in microseconds, a huge impulse voltage resembling a 1.2/50 μsec pulse appears across the object (a typical waveform is shown in fig), thus subjecting the equipment under discharging to a lightning impulse voltage.   To overcome this non linear carbon discharge resistor is employed. the reverse temperature coefficient of carbon facilitates controlled discharging. as the current flows through the carbon resistance, this increases the temperature and by virtue of reverse temperature coefficient, the resistance falls. therefore as the current is flowing, voltage is reducing and since resistance is also reducing acontrolled discharging takes place.   The do fuse operating rods has and innovative design for fitting, removing & changing drop out fuses. the do fuse. operating rods has a spring loaded fuse jaw which accepts the do fuses easily and ensures that it does not fall while fitting or removing. the entire operation is carried out from ground level comfortably.   This method saves considerable amount of time and effort for fuse replacement and provides extremely safe procedure as compared to the conventional procedures.

We offer stainless steel welding electrodes. welding electrodes- description and applications: welding electrodes rutile type medium coated mild steel very easy to handle universal electrode with versatile applications in steel construction, ship building, boiler, tank fabrication and pipeline construction. Excellent weldability, very low spatter, smooth arc, fine rippled seems, self lifting slag, good strike and re-strike. Welds are of radiographic quality we are leading manufacturer supplier and exporter for welding electrodes, steel wires to usa, uk, america brazil ,mexico,colombia ,argentina ,peru ,venezuela ,chile ,guatemala ,ecuador , cuba ,haiti ,bolivia ,honduras ,paraguay ,nicaragua ,el salvador ,costa rica ,panama ,uruguay, nigeria ,egypt ,south africa ,algeria ,angola ,morocco ,sudan ,kenya ,ethiopia ,libya ,tunisia ,tanzania ,ghana ,ivory coast ,dr congo ,cameroon ,uganda ,zambia ,gabon ,mozambique , botswana ,senegal ,chad ,equatorial guinea ,congo ,zimbabwe ,burkina faso ,mauritius ,mali , namibia ,south sudan

a) Solid Copper Earth Rods Copper Strips, Plates and Solid Rods are manufactured from highly conductive EC Grade Copper. They offer great resistance to corrosion. They are ideally used in applications where the salt content in the soil is very high. Size : 16mm - 2Omm (length as per customer specifications). b) Swaged Earth Rods (250 Microns) Plain Swaged Earth Rods. Tapered Swaged Earth Rods. c) Copper Bonded Earth Rods They are manufactured from Structural Quality High Tensile Steel Grade 43A to BS 4360. These rods are molecularly bonded with pure EC Grade Copper (99.9%).

As a trusted name, we make use of only premium packaging material to pack the products in order to ensure their complete safety during transit. Moreover, our packaging experts strictly check the same. Our quality analysis system is headed by experienced quality auditors who check each and every product at different levels. Additional Information : Minimum Order Quantity - 50 Pieces Pay Mode Terms - T/T (Bank Transfer),Other

• Diameter: 4”
• thickness: ½”

Non Linear Carbon Discharge Resistor Type Discharge Rods are used to discharge dead system having limited fault levels and also to discharge the static & induced charges in the dead system or equipment, particularly in transmission lines, cables, transformers, reactors, large bus bar systems, switch-gears etc. The earthing lead is made up of special highly flexible braided copper cable with transparent sheath. Copper Hook of 4� dia of ½� thick copper rod & Earth End Clamp of special alloy are provided.

• Type: Aluminium Cubes

wedge coil aluminium wire w-al99 is 99 % minimum specification. Aluminum (al) is used for deoxidizing and grain refining in steels. It is a strong deoxidizer. It is also used as nitride former and as an alloying agent. Its ability to scavenge nitrogen (n) from steel makes it a useful addition in drawing quality steels, especially for automotive applications. We at wedge have strong willingness to offer best quality steel raw materials. Along with refractories ferro alloys are our one of the most important flagship product range.     aluminum (al) is being used as a deoxidizing element in steels for more than 100 years. Deoxidation of steel with al is common practice today. Al plays an important role in secondary metallurgy. It forms aluminum oxide or alumina (al2o3) alumina and decreases the amount of oxygen in the steel during the production of killed steels.metallic al is the most common addition agent.    at wedge we also supply other forms notched bars, shots, pigs, small ingots, chopped wire, briquettes along with convenient forms such as coiled machine fed wire. Purity of deoxidation grade of al is normally over 95 % with the main tramp elements being zinc, tin, copper, magnesium, lead and manganese.

• Purity: 99.99%
• Usage: Industrial
• Material: Metal
• Length: 1 9/16 in 40 mm
• Application: Plating
• Resistivity: Corrosion & Chemical resistant
• Performance: Optimum

if two different metals are physically or electrically connected and immersed in electrolyte then some amount of current flows between the two metals. This current is supplied by one of the metals by emmiting metal ions to the conductive environment . This is known as galvanic corrosion which destroys base metals rapidly.magnesium (mg) alloy anodes are having greater driving potential than zinc (zn) or aluminium (al). So that magnesium anodes are suitable for the protection of pipeline, tanks, condensers, water boxes, heatexchangers, ship hulls, boilers and marine structures from corrosion.according to the application and customer requirement we manufacture and supply high potential sacrificial magnesium anode and low potential sacrificial magnesium alloy anode for cp.

The rods are manufactured from low carbon, high tensile steel with a 99.9 % pure electrolytic copper thickness of 250 microns. Thread rolling after plating preserves the copper thickness ensuring corrosion resistance across the threads. Threads comply with ANSIASME B1.1-2003. Extensible earth rods are coupled using threaded, easy to use brass alloy couplings. Connections can be made by using bolted clamps or exothermic welding process. By specifying UL listed earth rods you ensure full compliance to the standard UL 467. Only products bearing the UL listing mark are covered by UL’s listing and follow-up service.

As per the demands of the market and our clients, we are engaged in offering an extensive array of Burner Electrode, which is available in different models and sizes at affordable prices. These are highly valued by our clients for their accuracy, easy to use and reliable performance. These are fabricated using premium quality raw material to meet the defined quality standards  

• Material: Cast Iron
• Brand Name: Superon
• Elongation: Greater than or equal to 15 % (A5)
• Tensile Strength: 400 - 550 N/mm2
• AWS and SFA: E NiFe-C1
• Yield Strength: 300 - 400 N/mm2
• Welding Conditions: AC,DC+

• Application: Industrial use
• Material: Aluminum
• Diameter: 1.6,2.4,3.2mm
• Color: Beige
• Packaging Type: Box
• Thickness: 10-20 mm
•  :  

• Color: orange
• Material: HDPE Plastic 
• Country of Origin: Made in India
• Usage/Application: Injection Moulding

Arc welding electrodes are identified using the A.W.S, (American Welding Society) numbering system and are made in sizes from 1/16 to 5/16 . An example would be a welding rod identified as an 1/8" E6011 electrode.

• Diameter: 50 mm
• Thickness: 1.2 mm (Coating)
• Material: Copper
• Shape: Round
• Length Of Rod: 3 m
• Usage/Application: Earthing Fitting
• Technique: Hot Rolled
• Surface Finishing: Nickel finish

The company is primarily engaged in the manufacturing and supplying of Spot Welding Electrodes in all over the country. The Spot Welding Electrodes are acknowledged amidst the clients for excellent quality and unsurpassed performance. The clients can avail the finest Spot Welding Electrodes from us at the most competitive prices. Made Up Of : Cr Cu Zr Alloy

a) Solid Copper Earth RodsCopper Strips, Plates and Solid Rods are manufactured from highly conductive EC Grade Copper. They offer great resistance to corrosion. They are ideally used in applications where the salt content in the soil is very high.Size   : 16mm - 2Omm (length as per customer specifications). b) Swaged Earth Rods (250 Microns) Plain Swaged Earth Rods. Tapered Swaged Earth Rods. c) Copper Bonded Earth RodsThey are manufactured from Structural Quality High Tensile Steel Grade 43A to BS 4360. These rods are molecularly bonded with pure EC Grade Copper (99.9%).

We are listed as the most dependable Welding Rods Supplier from India. Customers from every nook and corner of India are placing huge and repeated orders for the Stainless Steel Welding Rods as per the specifications provided in terms of sizes and dimensions. Moreover, the Electrodes Welding Rods are made up of excellent quality materials that ensure high durability and resistivity to breakage to the products being welded.